• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.206-207
• /
• 2000

스크린프린팅 된 탄소전극과 항체가 결합된 리포좀을 이용한 일회용 전기화학발광 면역센서를 구성하였다. 분석물질농도에 비례하여 분석물질-면역리포좀 복합체는 모세관현상에 의해 membrane strip에서 전극 상으로 전달되었고, 이 리포좀은 계면 활성제에 의해 파괴되고 신호발생에 이용되는 ruthenium이 방출되었다. 이와 같은 면역센서의 성능은 의료현장검사 혹은 자가진단에 적합할 것으로 예측된다.

• Tribology and Lubricants
• /
• 제17권3호
• /
• pp.191-197
• /
• 2001

Nano adhesion and friction characteristics between SPM(scanning electron microscope) tips and flat plates of different materials were experimentally studied. Tests were performed to measure adhesion and friction in AFM(atomic force microscope) and LFM(lateral force microscope) modes in different conditions of relative humidity. Three different Si$_3$N$_4$ tips (rdaii : 15nm, 22nm and 50 nm) and three different flat plates of Si-wafer(100), W-DLC(tungsten-incorporated diamond-like carbon) and DLC were used. Results generally showed that adhesion and friction increased with the tip radius, and W-DLC and DLC surfaces were superior to Si-wafer. But the adhesion force of Si-wafer showed non linearity with the tip radius while W-DLC and DLC surfaces showed good correlation to the “JKR model”. It was found that high adhesion force between Si-wafer and a large radius of tip was caused by a capillary action due to the condensed water.

• 한국레이저가공학회지
• /
• 제4권2호
• /
• pp.13-19
• /
• 2001

When a high-power laser beam is irradiated on the surface of material, it is well known that a cavity, called a keyhole induced by the pressure action of the vapor plume, is generated in the molten material. This paper describes the interaction between a pulsed CO$_2$ laser beam and water. The laser-beam is used to generate and maintain a conical depression in the water surface similar to the keyhole created during laser penetration welding. Experimental results show that the depth of laser-beam penetration is limited by hydrodynamic instability. The instability of the surface cavity can be understood by the capillary instability of a hollow jet. Theoretical computation of the steady keyhole shape has been performed. modifying the model suggested by Andrews et al. (1976). The model predicts the qualitative behavior of the keyhole but significantly underestimates the average diameter.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.710-713
• /
• 2005

In this study, waffle type barrier ribs for counter electrode discharge cells were prepared via micro-molding process. The master mold was prepared by UV lithography and working mold was manufactured by replicating the master mold. The UV paste used in this study consisted of ceramic powders for the barrier ribs, binder, hardener, and dispersant was filled into cavities of a polymeric mold by action of capillary pressure developed between mold and paste. The results demonstrated a possibility of one-step process for the manufacturing of waffle type barrier ribs embedded with sustaining electrodes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
• /
• pp.583-585
• /
• 2000

This study reports the fluidic handling method using hydrophobic patterns inside PDMS microchannels. In order to obtain hydrophobic patterns, we pattern fluorcarbon(FC) film surfaces by lift-off process. FC films are deposited by spin coating method and plasma polymerization method. Hydrophobic surfaces are used as the barriers to control fluid flow. Injected liquid is spontaneously filled up inside PDMS-microchannels by the capillary action. Liquid flow stops when it meets hydrophobic regions which can be the barrier against fluid flow. Then, again, when liquid is pressurized externally, liquid can move toward another hydrophilic region by external air pressure. Contact angle analyses are performed on fluorocarbon films to estimate the wettability of film surfaces.

• 한국세라믹학회지
• /
• 제23권4호
• /
• pp.69-77
• /
• 1986

Single crystals of zinc tungstates were grown by the Czochralski method. To obtain the seed crystals various methods were employed including 4 points platinum wirse which dipped the melt and the capillary action from the melt led the 3 differently oriented seeds such as [100], [010] and [001] directions. Optimum growing conditions were observed as neck diameter 2mm rotation speed 50-60 rpm maximum diameter 15mm and pulling rate 0-10 mm/hr. Dendrites covered on the olidified surface in a platinum crucible were turned out to be [001] direction because obviously this crystal has the strong [001] preferential growth habit. The (100) and (010) planes of single crystals showed the slip planes and the (010) plane showed the perfect cleavage surface.

• 한국안광학회지
• /
• 제10권3호
• /
• pp.173-184
• /
• 2005

각막과 콘택트렌즈 사이의 눈물 층에는 모세관 작용에 따른 장력이 발생하고, 순목 결과 렌즈가 평형위치에서 벗어나게 되면 렌즈의 상/하 또는 좌/우의 눈물 층의 간격이 변하며 이 간격 변화에 의해 복원력이 발생한다. 이 복원력과 눈물 층의 정성 저항력에 의해 렌즈는 진폭이 감소하는 진동을 하면서 평형위치로 복귀하게 된다. 순목 시 안검작용에 의해 렌즈가 일정한 위치로 편위 되었다고 설정할 때 순목 종료 후 매 순간 렌즈의 위치를 예측할 수 있는 미분방정식과 그 수치계산 프로그램 모델을 수립하였다. 이 컴퓨터 모델을 사용하여 렌즈의 BC, 직경, 초기 위치, 무게 등이 감쇄진동에 미치는 영향을 모사하였다. 순목 후 렌즈의 평형 위치로의 귀환은 순목 시간이 적절한 경우에는 순목 종료 직후의 렌즈 위치 및 직경에 그다지 영향을 받지 않고 빠르게 이루어지지만 렌즈의 BC가 지나치게 크거나, 무게가 큰 경우에는 렌즈 진동이 급격히 느려지기 때문에 평형 위치로 되돌아오는데 시간이 많이 걸리게 될 것이다.

• 대한한방내과학회지
• /
• 제15권1호
• /
• pp.80-98
• /
• 1994

According to the original documents, Sagungsan is considered as an effective drug for controlling the hypertensive epistaxis induced by tension of autonomic nerve and it's hyperfunction. The present experiment was designed to understand the effect of Sagungsan extract on the hemostatic action, intracranial pressure, blood pressure and cardiovascular system in experimental animals. And thus the bleeding time, prothrombin time, capillary dilation, blood pressure, Intracranial pressure, and enzymatic analysis of the ATPase activities were studied. The result obtained here were as followings: 1. Sagungsan water extract reduced the bleeding time in mouse, and prolonged the prothrombin time in rabbits. 2. The drug extract increased the tail volume by capillary dilation in rats. 3. The drug extract inhibited the increase of intracranial pressure and arterial blood pressure in rabbits. 4. At the early time, the increase of arterial blood pressure by the drug extract significantly inhibited by pretreated atropin and regitine in rabbits. 5. The drug extract relaxed the smooth muscle by stimulating the Mg2+-Ca2+-ATPase activities of gastric sarcoplasmic reticulum isolated from rabbit stomach. 6. The drug extract stimulated the heart contraction by inhibiting the $Mg^{2+}-Ca^{2+}-ATPase$ activities of cardiac sarcoplasmic reticulum isolated from rabbit heart. The inhibitory mechanism was reversible and noncompatitive. 7. The drug extract increased the hepatic blood volume by stimulating the hepatic total ATPase activities and hepatic metabolism. 8. The drug extract acted as a tranquilizer by inhibiting the neural Na+-K+-ATPase activity. According to the results, Sagungsan water extract dilated the capillaries, stimulated the heart beat, and thus increased the blood flow with decreasing the intracranial pressure and blood pressure. These effects stanches the epistaxis collectively.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.280-287
• /
• 2021

Generating electricity by using water in many energy harvesting system is due to their simplicity, sustainability and eco-friendliness. Evaporation-driven moist-electric generators (EMEGs) are an emergent technology and show great potential for harvesting clean energy. In this study, we report a transpiration driven electro kinetic power generator (TEPG) that utilize capillary flow of water in an asymmetrically wetted cotton fabric coated with carbon black. When water droplets encounter this textile EMEG, the water flows spontaneously under capillary action without requiring an external power supply. First carbon black sonicated and dispersed well in three different solvent system such as dimethylformamide (DMF), sodiumdedecylbenzenesulfonate (SDBS-anionic surfactant) and cetyltrimethylammoniumbromide (CTAB-cationic surfactant). A knitted cotton/PET fabric was coated with carbon black by conventional pad method. Cotton/PET fabrics were immersed and stuttered well in these three different systems and then transferred to an autoclave at 120 ℃ for 15 minutes. Cotton/PET fabric treated with carbon black dispersed in DMF solvent generated maximum current up to 5 µA on a small piece of sample (2 µL/min of water can induce constant electric output for more than 286 hours). This study is high value for designing of electric generator to harvest clean energy constantly.

• Parasites, Hosts and Diseases
• /
• 제34권3호
• /
• pp.177-184
• /
• 1996

흰쥐의 폐조직 절편에서 실험적으로 유발시킨 폐포자충을 검출하고자 조직내교잡법 (in situ hybridization)을 수행하였다 흰쥐는 methylprednisolone(데포-메드롤)을 10 mg/kg의 양으로 주 1회 피하주사하여 면역억제시켰고. 6 8 및 9주에 희생시켜 폐를 적출한 후 포르말린에 고정하였다. 폐포자충의 5S rRNA에 상보적인 22 base길이의 oligonucleotide probe를 주문제작(한국 생공)하였고 3' 부위에 biotin을 부착하였다 조직내교잡법은 Microp「obi stainin료 system과 manual capillary action법을 이용하여 1시간 이내에 수행하였다 폐포자충은 주로 폐포세포의 내강면. 폐포내 삼출물 및 세기관지의 분비물 등에서 검출되었다 6주 면역억제시 양성반응은 주 로 폐단면의 가장자리 부위에서 부분적으로 간찰되었으나. 8 내지 9주에서는 전체적으로 관찰되었 나. Grocott의 methenamine silver 염색법에 비하여 조직내 교잡법은 폐포자충을 신속하게 검출 할 수 있호 영양형의 검출에는 특히 유리하며. 다른 알려진 병원성 진균 및 원충류와의 교차반응이 없어. 실험적으로 유발시킨 폐포자충에 의한 폐렴의 진단에도 유용하게 사용될 수 있을 것으로 생각된다.