• Bulletin of the Korean Chemical Society
• /
• 제30권11호
• /
• pp.2603-2607
• /
• 2009

$LiNi_{0.5-x}Co_{2x}Mn_{0.5-x}O_{2}$ (x = 0, 0.1, 1/6, 1.2, 0.3) were synthesized by the solid-state reaction method. The crystal structure was analyzed by X-ray powder diffraction and Rietveld refinement. $LiNi_{0.5-x}Co_{2x}Mn_{0.5-x}O_{2}$ samples give single phases of hexagonal layered structures with a space group of R-3m for x = 0.1, 1/6, 0.2, and 0.3. The lattice constants of a and c-axis were decreased with the increase in Co contents in samples. The thickness of MO2 slab was decreased and inter-slab distance was increased with the increase in Co contents in $LiNi_{0.5-x}Co_{2x}Mn_{0.5-x}O_{2}$. According to XPS analysis, the valence states of Mn, Co, and Ni in the sample are mainly +4, +3, and +3, respectively. The discharge capacity of 202 mAh/g at 0.1C-rate in the potential range of 4.7 - 3.0 V was obtained in $LiNi_{0.3}Co_{0.4}Mn_{0.3}O_2$ sample, and $LiNi_{0.4}Co_{0.2}Mn_{0.4}O_2$ gives excellent cycle performance in the same potential range.

• 한국통신학회논문지
• /
• 제34권3A호
• /
• pp.229-234
• /
• 2009

본 논문에서는 자원 재사용이 가능한 무선 멀티홉 시스템에서 RS (Relay Station)간 적응적으로 무선자원을 재사용하기 위한 요구 자원량 결정 기법을 제안한다. 멀티홉 시스템에서 BS (Base Station)는 RS 각각의 요구 자원량을 고려하여 RS에게 자원을 동적으로 할당할 수 있다. 이 때 RS간에 무선자원을 재사용하면 시스템의 사용 가능한 자원량이 증가하는 효과를 얻을 수 있다. BS는 같은 자원을 재사용하는 RS에게 일반적으로 동일한 자원을 할당하며, 이를 위해 RS들의 서로 다른 요구 자원량을 대표하는 하나의 값을 결정해 줄 필요가 있다. 본 논문에서는 각 RS의 요구 자원량과 buffer 사용비율을 바탕으로 재사용 RS들의 요구 자원량의 대표값을 적응적으로 결정하는 기법을 제시한다. 모의실험을 통해 제안한 기법이 멀티홉 시스템의 성능을 증대시킬 수 있음을 보였다. 재사용 RS들의 대표 요구 자원량 값을 고정적으로 적용하는 경우에 비해 제안된 적응적 기법을 적용했을 때 시스템 용량이 약 두 배까지 증대됨을 확인하였다.

• 한국정보과학회논문지:시스템및이론
• /
• 제31권8호
• /
• pp.445-452
• /
• 2004

디스크의 구역분할기술(zoning technology)은 디스크의 저장용량과 평균 전송 대역폭을 증가시킴으로써, 디스크 서브시스템의 성능을 향상시켰다. 멀티미디어 시스템에서 구역분할 디스크의 성능을 충분히 이용하기 위하여 이중 버퍼링을 하는 SCAN 스케줄링을 사용한다. 하지만, 이 방식은 새로운 스트림의 요청 시에 지터(jitter)를 발생시키는 문제점이 있다. 본 논문에서는 이 문제를 해결하기 위한 선행버퍼링(pre-buffering) 기법을 제안한다. 선행 버퍼링은 디스크 서브시스템의 수학적 모델을 통하여 스트림의 개수에 따른 주기시간과 각 주기시간에 필요한 데이타 양, 그리고 새로운 스트림 요청 시에 발생하는 데이타의 부족분을 예측하고, 예상되는 데이타의 부족분을 각 스트림의 서비스 전에 미리 버퍼링함으로써, 지터를 방지한다. 선행 버퍼링 기법은 멀티미디어 서버에 적용되어 사용자에게 지터 없는 고품질의 서비스를 제공하는 데 기여할 수 있다.

• 한국식품조리과학회지
• /
• 제21권6호통권90호
• /
• pp.782-793
• /
• 2005

This study investigated the effect of $2\%$ addition of pectin and alginate on the Physicochemical and retrogradation Properties of Jeungpyun, a Korean traditional fermented rice cake. The volume of batters with alginate and Pectin was significantly larger than that of control. Jeungpyun samples with Pectin and alginate had a larger volume with uniform and smaller cell size. All samples showed largest foaming capability after second fermentation. Foaming capability of the control ($0\%$ addition of pectin and alginate) was significantly larger than that of the treated samples. The amount of reducing sugar tended to increase during fermentation but decreased after steaming, which was due to the increase in hydrolysis of starch. On the contrary, the content of free sugar was slightly decreased during fermentation but slightly increased after steaming. The control contained the largest amount of free sugar after steaming. The microstructure of starch particles after fermentation showed completely dispersed starch granules with air bubbles. After steaming, the structure was sponge-like in all samples. Samples with added alginate and pectin had significantly higher water binding capacity than those of the control. All samples showed noticeably increased solubility and swelling power at $70^{circ}C$ with the control being significantly lower than the treated samples. Retrogradation was measured with $\alpha$-amylase and the retrogradation process of the sample with added alginate and pectin proceeded slower than that of the control. The relative crystallinity was observed through X-ray diffraction method and samples with added alginate and pectin had smaller crystallinity and delayed retrogradation compared to the control. Thus, Jeungpyun with the addition of alginate and Pectin demonstrated improved functionality and dietary fiber addition effect. The storage period of was extended as the retrogradation rate was delayed by the addition of dietary fibers.

• Structural Engineering and Mechanics
• /
• 제76권3호
• /
• pp.311-324
• /
• 2020

Until now, a comparative study on fully and partially-connected steel shear walls leading to enhancing strength and stiffness reduction of partially-connected steel plate shear wall structures has not been reported. In this paper a number of 4-story and 8-story steel plate shear walls, are considered with three different connection details of infill plate to surrounding frame. The specimens are modeled using nonlinear finite element method verified excellently with the experimental results and analyzed under monotonic loading. A comparison between initial stiffness and shear strength of models as well as percentage of shear force by model boundary frame and infill plate are performed. Moreover, a comparison between energy dissipation, ductility factor and distribution of Von-Mises stresses of models are presented. According to the results, the initial stiffness, shear resistance, energy dissipation and ductility of the models with beam-only connected infill plates (SSW-BO) is found to be about 53%, 12%, 15% and 48% on average smaller than those of models with fully-connected infill plates (SPSW), respectively. However, performance characteristics of semi-supported steel shear walls (SSSW) containing secondary columns by simultaneously decreasing boundary frame strength and increasing thickness of infill plates are comparable to those of SPSWs. Results show that by using secondary columns as well as increasing thickness of infill plates, the stress demands on boundary frame decreases substantially by as much as 35%. A significant increase in infill plate share on shear capacity by as much as 95% and 72% progress for the 4-story SSW-BO and 8-story SSSW8, respectively, as compared with non-strengthened counterparts. A similar trend is achieved by strengthening secondary columns of 4-story SSSW leading to an increase of 50% in shear force contribution of infill plate.

• 한국안전학회지
• /
• 제36권5호
• /
• pp.1-9
• /
• 2021

With the convergence of the information and communication technologies, a new age of technological civilization has arrived. This is the age of intelligent revolution, known as the 4th industrial revolution. The 4th industrial revolution is based on technological innovations, such as robots, big data analysis, artificial intelligence, and unmanned transportation facilities. This revolution would interconnect all the people, things, and economy, and hence will lead to the expansion of the industry. A high-density, high-capacity energy technology is required to maintain this interconnection. As a next-generation energy source, lithium-ion batteries are in the spotlight today. However, lithium-ion batteries can cause thermal runaway and fire because of electrical, thermal, and mechanical abuse. In this study, thermal runaway was induced in 72.5 Ah NCM pouch-type lithium-ion batteries because of thermal abuse. The surface of the pouch-type lithium-ion batteries was heated by the hot plate heating method, and the effect of the rate of increase in the surface temperature on the thermal runaway trigger time was analyzed using Minitab 19, a statistical analysis program. The correlation analysis results confirmed that there existed a strong negative relationship between each variable, while the regression analysis demonstrated that the thermal runaway trigger time of lithium-ion batteries can be predicted from the rate of increase in their surface temperature.

• 한국산업융합학회 논문집
• /
• 제22권1호
• /
• pp.1-9
• /
• 2019

In electric agricultural machine the gearbox is used to increase torque and lower the output speed of the motor shaft. The gearbox consists of several shafts, helical gears and spur gears works in series. Optimization plays an important role in gear design as reducing the weight or volume of a gear set will increase its service life and improve the bearing capacity. In this paper the basic design parameters for gear like shaft diameter and face width are considered as the input variables. The bending stress and material volume is considered as the objective function. ANSYS was used to investigate the bending stress when the variable was changed. Artificial Neural Network (ANN) was used to obtain the mathematical model of the system based on the bending stress behaviour. The ANN was used since the output system is nonlinear. The Genetic Algorithm (GA)　technique of optimization is used to obtain the optimized values of shaft diameter and face width on the pinion based on the ANN mathematical model and the results are compared as that obtained using the traditional method. The ANN and GA were performed using MATLAB. The simulation results were shown that the proposed algorithm was successfully calculated the value of shaft diameter and face width to obtain the minimal bending stress and material volume of the gearbox.

• 한국지반신소재학회논문집
• /
• 제18권3호
• /
• pp.101-112
• /
• 2019

그라우팅 공법은 연약지반의 보강과 방수, 부등침하로 손상된 구조물의 지지력을 향상시킨다. 본 연구는 보강섬유와 고로슬래그 미분말을 이용하여 그라우트재의 압축강도와 차수를 향상시키는데 있다. 이와 관련하여 본 연구에서는 고로슬래그 미분말의 비율이 높은(50% 이상) 시료에 대해 일축압축시험을 수행하였다. Mpa또한 탄소섬유와 아라미드 섬유를 비교하기 위하여 0, 0.5, 1.0%로 증가시켜 실험하였다. 탄소섬유 및 아라미드 섬유 함유량이 증가함에 따라 일축압축강도가 증가하였고 이는 그라우트재 내에 섬유에 의한 가교작용이 일축압축강도를 증가시키는 경향을 확인하였다. 또한 아라미드 섬유로 보강된 그라우트재에서 탄소섬유로 보강된 그라우트재 보다 일축압축강도가 약 10%이상 증가된 것을 확인하였다.

• 대한물리의학회지
• /
• 제17권1호
• /
• pp.75-83
• /
• 2022

PURPOSE: This study was conducted to investigate the effect of the resistance respiratory muscle exercise with transcutaneous electrical nerve stimulation (TENS) on the respiratory muscle tone and pulmonary function of stroke patients. METHODS: Twenty stroke patients were divided into the TENS group (n = 7), placebo TENS group (n = 7), and control group (n = 6), and each intervention was performed on the three groups 5 times a week for 4 weeks. The assessment was carried out by measuring changes in the muscle tone of the latissimus dorsi and abdominal external obliques, and pulmonary function. RESULTS: In this study, the TENS group and the placebo TENS group had significant increases in the paretic side latissimus dorsi muscle tone, forced vital capacity (FVC), forced expiratory volume in 1 second (FEV1), and peak expiratory flow (PEF). There was no significant difference in changes in respiratory muscle tone between the three groups. The pulmonary function was significantly different between the three groups, and it was observed from the results of the post-hoc test that FVC showed a significant increase in the TENS group and the placebo TENS group compared to the control group. CONCLUSION: Through this study, it was found that the respiratory muscle resistance exercise was more effective as a method to increase respiratory muscle tone and pulmonary function in stroke patients than combined transcutaneous electrical nerve stimulation.

• Nuclear Engineering and Technology
• /
• 제55권5호
• /
• pp.1644-1650
• /
• 2023

In spent fuel reprocessing, UO₂(DBP)₂ (U-DBP) can be deposited in stainless steel equipment. U-DBP must be removed by dissolution and the process must not cause corrosion to stainless steel. This study was conducted to find the best scheme for dissolution. U-DBP was manufactured by the titrimetric sedimentation method. The effects of different factors on the dissolution of U-DBP were investigated. For example, solid-liquid ratio, hydrazine carbonate solutions with different mass components, mixed solutions containing different concentrations of H₂O₂, and different carbonates. The results indicated that U-DBP does not have a regular crystal morphology. With the increase of the solid-liquid ratio and the mass fraction of hydrazine carbonate, the concentration of U(VI) at the dissolution equilibrium increases gradually. The addition of H₂O₂ has a great promotion effect on the dissolution. However, when the concentration of H₂O₂ is greater than 0.5 M, the dissolution solution may have an erosive effect on the stainless steel. (NH₄)₂CO₃ can increase the dissolution capacity of dissolved U-DBP, but it may also accelerate the corrosion of stainless steel.