• Korean Journal of Materials Research
• /
• v.30 no.6
• /
• pp.279-284
• /
• 2020

In this work, a carbon-doped carbon nitride photocatalyst is successfully synthesized through a simple centrifugal spinning method after heat treatment. The morphology and properties of the prepared photo catalyst are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-vis spectrophotometer (UV-vis), and specific surface area. The results show that the band gap of the prepared sample, g-CN-10 is 2.1 eV, is significantly lower than that of pure carbon nitride, 2.7 eV. As the amount of cotton candy increased, the absorption capacity of the prepared catalyst for visible light is significantly enhanced. In addition, the degradation efficiency of Rhodamine B (RhB) by sample g-CN-10 is 98.8 % over 2 h, which is twice that value of pure carbon nitride. The enhancement of photocatalytic ability is attributed to the increase of specific surface area after the carbon doping modifies carbon nitride. A possible photocatalytic degradation mechanism of carbon-doped carbon nitride is also suggested.

• Preventive Nutrition and Food Science
• /
• v.22 no.3
• /
• pp.216-222
• /
• 2017

Antioxidant rich green leafy vegetables including garden spinach leaf, water spinach leaf, Indian spinach leaf, and green leaved amaranth were selected to evaluate the effects of water boiling and oil frying on their total phenolic content (TPC), total flavonoid content (TFC), reducing power (RP), and antioxidant capacity. The results revealed that there was a significant increase in TPC, TFC, and RP in all the selected vegetables indicating the effectiveness of the cooking process on the antioxidant potential of leafy vegetables. Both cooking processes enhanced significantly (P<0.05) the radical scavenging ability, especially the oil fried samples showed the highest values. There is a significant reduction in the vitamin C content in all the vegetables due to boiling and frying except in the Indian spinach leaf. However, the present findings suggest that boiling and frying can be used to enhance the antioxidant ability, by increasing the bioaccessibility of health-promoting constituents from the four vegetables investigated in this study.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.3
• /
• pp.1074-1086
• /
• 2015

We Relay-assisted cellular network architecture has been developed to cover cell-edge users and to improve capacity. However, the deployment of relay stations (RSs) in cellular networks may increase the total energy consumption. Though energy efficiency has become a major concern in cellular networks, little work has studied the energy efficiency of relay-assisted cellular networks by sleep scheduling. In this paper, a distributed base stations (BSs) sleep scheduling scheme in relay-assisted cellular networks is proposed. The goal is to maximize the energy efficiency under the spectral efficiency constraint. Firstly, whether the BSs should be sleeping or active is determined by the traffic profile. Then, the transmission powers of the active BSs are optimized within the game-theoretic framework, by using an interior-point method, so as to maximize the energy efficiency. Simulation results demonstrate that the effectiveness of the proposed scheme is superior to that turning on all the BSs without sleep scheduling.

• Journal of the Korea Furniture Society
• /
• v.20 no.4
• /
• pp.281-289
• /
• 2009

This research examined the technical feasibility of composite that had two layers of fiberglass reinforcement to enhance the load carrying capacity of lumber. Specimens were prepared from standard lumber made of thinning crop trees such as Larix kaempferi, Pinus koraiensis, and P. rigida. Results indicated that bending properties, hardness, and wood screw withdrawal load of low density lumber from the P. koraiensis increased as the number of layers of fiberglass reinforcement increased. Composite produced by VARTM method showed the MOE increased in all specimens, while the MOR differed on the location, whether the 2-layers of FRP is put on tensile zone or compressive zone. The MOR of high density lumber from Larix kaempferi and P. rigida decreased when they placed into tensile zone, but low density lumber from P. koraiensis increased in same location. The bending toughness only increased high density lumber of Larix kaempferi as the number of layers of fiberglass reinforcement increased. The technique developed by this study may increase an opportunity to use small diameter log with low density for commercial purposes.

• Journal of Korean Society of Water and Wastewater
• /
• v.9 no.4
• /
• pp.73-86
• /
• 1995

The propriety of the numerical model application was examined on Paldang resevoir and its inflow tributaries located in the center of the Korean peninsula and the long term water quality forecast of the oxygen profile was carried out in this syduy. The input data of the model was the capacity of the reservoir, catchment area, percolation, diffusion rate, vertical mixing rate, dissolution rate from the bottom of the reservoir, outflow of the resevoir, water quality measurement and meteorology data of the drainage basin, and the output result was the annual estimation value of the dissolved oxygen concentration and the biochemical oxygen demand. The modeling method is based on the measured or calculated boundary condition dividing the water area into several blocks from the macorscopic aspect and considering the mass balance in these blocks. As the result of the water quality forecast, it was expected that the water quality in Northern Han River and Paldang reservoir would maintain the recent level, but that the water quality in the Southern Han River and its inflow tributary would worsen below the grade 4 of the life environmental standard from around 2000 owing to the decrease of DO concentration and the increase of BOD concentration.

• Journal of Korea Game Society
• /
• v.5 no.1
• /
• pp.25-31
• /
• 2005

Game interface can be described as a method for communicating the information of the game, and with increase in complexity of the game and the role of interface also becomes complex. MMORPG of the present has a greater capacity than the RPG of the past, and because there are many information game users need to know such as uniqueness of the character, maturation system, beginning users who encounter MMORPG for the first time have difficulties in grasping the concept and the information of the game. Therefore, an interface design that assists theusers in understanding and adjusting to the game is needed. For the purpose of this dissertation, a study was conducted for an MMORPG screen layout design that enables quick understanding of game information for the inexperienced younger game users.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.430-431
• /
• 2011

Recently the power system consists of the more complicated structure, due to increase of power demands. In this circumstance, the congestion and loss capacity in transmission line is also increased. Accordingly, the investment planning of transmission system is required to reduce the congestion and loss of the transmission line. In study of the planning of domestic and international transmission expansion, the reliability of transmission planning and minimizing Investment cost is focused. However, the study has not been performed systematically in economic aspects. Typically, the congestion and loss costs have been individually calculated. It is not consider the mutual relationship between the congestion cost and the loss cost. This paper proposes a method to compute concurrently the congestion and loss costs. This purpose is to calculate the more exact value for economic assessment of the power system operation.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.397_398
• /
• 2009

Demonstrations to deploy high temperature superconducting (HTS) cable to the real gird are actively carried out throughout the world. Power utilities have an interest in the inherent advantage of the HTS cable system, and achieve the expected results from the series of verification test. To embody the reliability in the phenomenon occurred commonly in three-phase system, we simulate the load unbalance. A 22.9 kV large scale HTS cable system with the specification of 100 m-long, 50 MVA capacity has been tested with up to 30% unbalance rate. To evaluate the effect of AC loss increase due to the unbalanced load, the cooling loads are measured by the calorimetry method. In this paper, the correlation between AC loss and load unbalance is described and investigated precisely.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.9
• /
• pp.1384-1390
• /
• 2004

The full containment Liquefied Natural Gas(LNG) storage tank is based on a double liquid container concept : two separate containers, one within the other, are capable of containing the LNG. The outer concrete tank provides comer protection(secondary containment) to withstand and safely contain any spill from the inner tank. The comer protection is installed on inside corner surface of outer concrete tank. Because of high and complex stresses, corner protection is designed by ASME section ⅧI Div. 2, Appendix 4 on behalf of API 620 which is main design code for LNG tank. Design guidelines to determine design factors such as liner thickness and knuckle radius are not well understood because Appendix 4 is the design method not based on equation but FEM. Recently, the volume of LNG tank shows a tendency to increase. So it is necessary to set up the design guidelines to cope with change of LNG tank capacity and height/diameter ratio. In this paper, optimum design of corner protection was performed and the design guidelines were suggested by the results of FEM for LNG tanks which have different capacities and height/diameter ratio.

• Journal of Korean Institute of Industrial Engineers
• /
• v.1 no.1
• /
• pp.41-56
• /
• 1975

In the past the pattern of business down-trend usually appeared in the form of, first, decrease in facility investment, then decrease in inventory level, followed by reduced level of consumption. But the pattern nowadays is becoming just the opposite, that is, first, consumption decrease, then inventory level increase, followed by restriction of facility investment. Also in the past, the greater effort was placed in strengthening of hardware areas through optimization and modernization of production means on the premise of sales. But lately software areas take most of the main effort to establish production mean with sales as its objective. Under these circumstances one of the real problems facing production activities today is the conflicting relationship between sales and production functions. This occurs due to differences of their view points. Then, in order to achieve maximum profit at the least cost, which is the ultimate objective of a production activity, the need arises to effectively coordinate sales demand and plant production capacity. For this purpose strong control means and function must be devised. In our case study example we illustrate a management technique for a combined planning function, of optimal coordination of product mixes utilizing a computerized linear programming model as control means of attaining maximum profit. It is hoped that this example help achieve some of corporate objectives.