• Clean Technology
• /
• v.26 no.1
• /
• pp.55-64
• /
• 2020

According to the Korean Renewable Energy 3020 Implementation Plan, the installation capacity of renewable energy is expected to increase whereas technology for storing excess electricity and stabilizing the power supply of renewable energy sources is extremely required. Power-to-Gas is one of energy storage technologies where electricity is converted into gas fuel such as hydrogen and methane. Basically, Power-to-Gas system could be effectively utilized to store excess electricity generated by an imbalance between supply and demand. In this study, the economic feasibility analysis of Power-to-Gas reflecting the domestic situation was carried out. Total revenue requirement method was utilized to estimate the levelized cost of hydrogen. Validation on the economic analysis method in this study was conducted by comparison of the result, which is published by the International Energy Agency. The levelized cost of hydrogen of a 100-MW Power-to-Gas system reflecting the current economic status in Korea is 8,344 won kg^-1. The sensitivity analysis was carried out, applying the main analysis economic factors such as electricity cost, electrolyser cost, and operating year. Based on the sensitivity analysis, the conditions for economic feasibility were suggested by comparing the cost of producing hydrogen using renewable energy with the cost of producing natural gas reformed hydrogen with carbon capture and storage.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.7 no.2
• /
• pp.177-187
• /
• 2012

Franchising has long been an effective form of distribution that is used primarily by manufacturers whose product lines are especially suited exclusive or highly selective distribution. By IFA(International Franchise Association), franchising is defined as a continuing relationship in which the franchisor provides a licensed privilege to do business, plus assistance in organizing, training, merchandising, and management in return for a consideration from the franchisee. Thus franchising is a method for the owner(franchisor) of product, service, or method to obtain retail or wholesale distribution through licensed, affiliated dealers(franchisees). With rapid increase of franchising industry globally, franchising industry is very rapidly increasing especially in the sector of outdoor restaurant industry in Korea. But there are many problems to be settled for promoting this industry. For example, the industry is too much lean outdoor restaurant industry. With franchisors' short history and lack of management capacity, shortage of distribution infrastructure, smaller size of franchising system, and low trust between franchisor and franchisee, and so on, the industry has many barriers to overcome for promoting it. Here we are suggesting that taxation benefaction, monetary support for the starting franchisee, establishment of fair trade principle, promoting information system and professional human resource should be needed.

• International Journal of Highway Engineering
• /
• v.3 no.4 s.10
• /
• pp.127-136
• /
• 2001

To increase the structural integrity of concrete box culvert good compaction by the dynamic compaction roller with bi9 capacity is as effective as good backfill materials. It is needed for effective compaction that a compaction roller closes to concrete structure with high frequency. However structural distress of the culvert could be occur due to the excessive earth pressure by great dynamic compaction load. To investigate the characteristics of Induced stress by compaction, a box culvert was constructed with changing cushion materials and compaction methods. Two types of cushion material such as tire rubber chip and EPS(Expanded Polystyrene) were used as cushion panels and they are set on the culverts before backfill construction. Laboratory test result of cushion material says that the value of dynamic elastic modulus of rubber is lesser than that of EPS. On the other hand, material damping of rubber material is greater than that of EPS. In most case, dynamic compaction rollers with 10.5 ton weights were used and vibration frequency was applied 30Hz for the great compaction energy. This paper presents the main results on the characteristics of dynamic earth pressures during compaction. The amounts of induced dynamic pressures$(\Delta\sigma\;h)$ by compaction are affected with construction condition such as compaction frequency, depth of pressure cell, distance between roller and the wall of culvert and roller direction. Based on the measured values dynamic lateral pressure on the culverts, it could be said that orthogonal direction of roller to the length of culvert is more effective to compaction efficiency than parallel direction.

• Journal of Distribution Science
• /
• v.16 no.1
• /
• pp.87-99
• /
• 2018

Purpose - The Export Infrastructure Strengthening Program(EISP) is a project to expand exports of agri-food products through providing customized export information to food distribution companies and supporting overseas information activities. A total of 39.6 billion won was provided by 2016. So, the purpose of this study is to analyze whether EISP is effective for expanding exports of agri-food products. Research design, data, and methodology - A simple average difference between the export performance of the policy beneficiaries and the non-policy beneficiaries can be biased if the export capacity or inherent characteristics of the enterprise are not taken into consideration. In order to solve the problem of such a bias, the propensity score matching(PSM) method has been employed in this study. PSM is a method of converting the characteristics of an export company into an index through logit analysis and then reducing the matching to one dimension to improve the accuracy of the performance measurement. Results - The balancing test was conducted to determine how the characteristics of the policy beneficiary group and the matched policy non-beneficiary group corresponded to each other. As a result of the test, we could not reject the null hypothesis that there was no difference between the two groups, so that after the matching, the two groups were similar and the explanatory variables were well controlled. Using the nearest neighbor matching with propensity score estimating through logit analysis, we estimated average treatment effect on the treated(ATT). The food companies participating the EISP had the effect of increasing the exports of $ 5.88 million. As a result, the number of export contracts increased by 11.77, the number of exporting countries by 7.52, the number of export items by 47.51, and the number of buyers' consultation by 3.50. And overseas marketing expenses increased by 35.92 million won. Except for the number of export contracts, other export performance results showed statistically significant results. Conclusions - As the EISP has a positive effect on the expansion of agro-food exports, efforts should be made to find out the limitations or problems of the policy in the future and to make a greater contribution to the increase of exports.

• Food Science of Animal Resources
• /
• v.32 no.6
• /
• pp.756-762
• /
• 2012

The pre-rigor salting effects on physicochemical properties of ground duck breast muscle were evaluated in this study. The pre-rigor salting treatments were prepared within 30 min after slaughter, the duck breast muscles after post mortem 48 h were used to prepare the post-rigor treatments. The pre-rigor salting treatment had significantly higher pH value than post-rigor salting treatment (p<0.001), and all pre-rigor salting treatments showed a significant higher pH value. As a result, the pre-rigor salting treatment showed increased water holding capacity and decreased cooking loss compared to those in the post-rigor salting treatment. No significant differences in redness and yellowness were observed among the treatments (p>0.05). The increased solubility of salt-soluble proteins in the pre-rigor salting treatment leads to increase the hardness, gumminess, and chewiness. Also, the pre-rigor salted duck breast muscle had similar textural properties compared to those of post-rigor duck breast muscle containing sodium tri-polyphosphate (STPP). The 2-thiobarbituric acid (TBA) values of all treatments were ranged from 0.121 to 0.177 mg/kg. The lowest TBA value was observed for post-rigor duck breast muscle containing STPP, however, pre-rigor salting did not influence lipid oxidation of ground duck breast muscle. Therefore, the pre-rigor salting method, especially a single addition of sodium chloride to pre-rigor muscle, is more efficient method for improving cooking loss.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.20 no.4
• /
• pp.29-42
• /
• 2017

As the "Guidelines for GHG Environmental Assessment" was revised, it pointed out that the developers should evaluate GHG sequestration and storage of the developing site. However, the current guidelines only taking into account the quantitative reduction lost within the development site, and did not consider the qualitative decrease in the carbon sequestration capacity of forest edge produced by developments. In order to assess the quantitative and qualitative effects of vegetation carbon uptake, the CASA-NPP model and satellite image spatial-temporal fusion were used to estimate the annual net primary production in 2005 and 2015. The development projects between 2006 and 2014 were examined for evaluate quantitative changes in development site and qualitative changes in surroundings by development types. The RMSE value of the satellite image fusion results is less than 0.1 and approaches 0, and the correlation coefficient is more than 0.6, which shows relatively high prediction accuracy. The NPP estimation results range from 0 to $1335.53g\;C/m^2$ year before development and from 0 to $1333.77g\;C/m^2$ year after development. As a result of analyzing NPP reduction amount within the development area by type of forest development, the difference is not significant by type of development but it shows the lowest change in the sports facilities development. It was also found that the vegetation was most affected by the edge vegetation of industrial development. This suggests that the industrial development causes additional development in the surrounding area and indirectly influences the carbon sequestration function of edge vegetaion due to the increase of the edge and influx of disturbed species. The NPP calculation method and results presented in this study can be applied to quantitative and qualitative impact assessment of before and after development, and it can be applied to policies related to greenhouse gas in environmental impact assessment.

• Applied Chemistry for Engineering
• /
• v.24 no.6
• /
• pp.621-627
• /
• 2013

In order to apply eco-friendly poly(propylene carbonate) (PPC) into barrier packaging materials, six different PPC/exfoliated graphite (EFG) nanocomposite films with different EFG were successfully prepared by a solution blending method. Their water sorption behavior was gravimetrically investigated as a function of the EFG content and interpreted with respect to their chemical structure and morphology. The water sorption isotherms were reasonably well fitted by Fickian diffusion model, regardless of morphological heterogeneities. With increasing the EFG content, the diffusion coefficient and water uptake decreased from $12.5{\times}10^{-10}cm^2sec^{-1}$ to $7.2{\times}10^{-10}cm^2sec^{-1}$ and from 8.9 wt% to 4.2 wt%, respectively, which indicates that the moisture resistance capacity of PPC was greatly enhanced by incorporating EFG into PPC. The enhanced water barrier property of the PPC/EFG nanocomposite films with the high aspect ratio EFG makes them potential candidates for versatile packaging applications. However, to maximize the performance of the nanocomposite films, further researches are required to increase the compatibility of EFG in the PPC matrix.

• Journal of the Korean Chemical Society
• /
• v.20 no.6
• /
• pp.469-478
• /
• 1976

Clinoptilolite zeolite samples were treated with hydrochloric acid, sulfuric acid and phosphoric acid of different strength and the adsorption characteristics and crystal structures of the original and acid-treated clinoptilolites were studied. By treating with hydrochloric acid, the adsorbed amount increased to 5-fold for nitrogen, to 3-fold for benzene, but for methanol no significant change was observed. As acid strength increased further, there were declines both in adsorption capacity and crystallinity. The results showed that the increase of adsorbed amount was caused by the rearrangement of the pore entrance and cation exchange. A method for determination of clinoptilolite content in natural mineral based on benzene adsorption on acid-treated sample is proposed. By this method, the original sample used in this study was found to contain approximately 40% of clinoptilolite. Using pulse technique in micro-catalytic reactor system, the catalytic activities of hydrochloric acid-treated clinoptilolites in cumene cracking and toluene disproportionation reactions were measured. For cumene cracking reaction, the maximum conversion was observed for the 0.5 N hydrochloric acid-treated sample. It is instructive to note that the maximum benzene adsorption was also observed for the sample treated with 0.5 N HCl. This suggest that the conversion rate was determined mainly by the rate of transport of reactants and the products through the pore structure. In the toluene disproportionation reaction, the same trend was observed. But the rate of deactivation was high for samples with strong acid sites. Since catalyst having higher activity was deactivated more easily, the conversion maximum was shifted to the sample treated with higher concentration of acid, -1N. The catalytic activity of $Ca^{2+} and La^{3+} ion exchanged samples for the toluene disproportion was much lower than that of acid-treated samples. Introduction of Ca^{2+} and La^{3+}$ into the pore structure apparently decreases the effective pore diameter of acid-treated clinoptilolite thus limiting the diffusion of reactants and products.

• Food Science and Preservation
• /
• v.20 no.3
• /
• pp.289-295
• /
• 2013

The capacity of a pressure fan can be designed based on the air flow resistance of containers packed with fruits and vegetables in a pressure cooling system. This study was conducted to develop an air flow resistance model that was dependent on changes in the air flow rate and the method of stacking containers. The air flow resistance of a container packed with uniformly shaped balls was 1.5 times greater than the sum of the air flow resistance of a vacant container and that of a wire net container packed with only balls. In addition, the air flow resistance increased exponentially as the width of the stacks increased; however, the air flow resistance did not increase greatly as the length and height of the stacks increased, which indicates that the air flow resistance is primarily influenced by the width of the stack in the air flow direction. The air flow resistance in two lines of stacking was up to 17% less than that of the width of the stack. It was also possible to determine the air flow resistance using a function of the air flow resistance through a single container and develop a prediction model. A prediction model of air flow resistance that is dependent on the stacking method and the air flow resistance of a single container was developed.

• Journal of the Korea Concrete Institute
• /
• v.14 no.3
• /
• pp.430-439
• /
• 2002

The development of reinforcing steel is required in reinforced concrete structures. The standard hooks that have been widely used for the tensile development in the beam-column joints tend to create difficulties of construction such as steel congestion as the member cross sections are becoming smaller due to the use of higher strength concrete and higher grade steel. Using the reinforcing bars with end mechanical anchoring device (headed reinforcement) provides potential economies in construction such as reduction in development lengths, simplified details, and improved responses to cyclic loadings. In this paper, the pullout strengths and behaviors of the headed reinforcement were experimentally studied. In 33 pullout tests performed using D25 deformed reinforcing bars, the test parameters were embedment depth, edge distance, head size, and the use of transverse reinforcement. The pullout strengths determined from tests closely agreed with the pullout strengths predicted using the CCD method. The pullout strengths increased with increasing embedment depths nd edge distances. The strengths tend to increase with the use of larger heads. From the experimental program where the effect of the transverse reinforcement was examined, a modification factor to the CCD was suggested to represent the effect of such reinforcement that is installed across the concrete failure plane on the pullout strengths.