• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1988년도 학술세미나 강연집
• /
• pp.71-123
• /
• 1988

The aim of this paper is to examine the end bearing capacity of a pile in cohesionless soils. The ode of failure of soil due to pile installation is assumed from experimental observation of actual soil deformation. A new solution is proposed complying with the assumed mode of failure by employing the theory of cavity expansion. The effect of curvature of failure envelope is studied in relation to tile proposed solution. The influence of a curved failure envelope becomes larger with increasing degree of curvature and the level of confining stress. This effect in some cases or reduce the end bearing capacity by tore the 80 percent compared with that given by a straight failure envelope. For practical application of tile proposed solution, the method of determining the average volume change in the plastic zone is re-evaluated. The proposed solution is confirmed by comparing the theoretical values with experimental results obtained from model pile tests in a calibration chamber. The comparison shows that the proposed solution provides a reasonable prediction of end bearing capacity for both weak and strong grained soils.

• 플랜트 저널
• /
• 제7권1호
• /
• pp.40-48
• /
• 2011

This study shows the comparison between expected and actual capacity factors of a wind farm through wind resource analyzation. The expected capacity factor comes from an 'automatic weather system' run by the Korean national weather service and a 'meteorological mast' run by a project owner. Based on this comparison and analysis, the importance of meteorological mast micro-siting and selection of wind turbine class and type, will be studied along with presenting important implications for wind farm expansion and development.

• 한국식품조리과학회지
• /
• 제7권2호
• /
• pp.97-104
• /
• 1991

This study was carried out in order to study the protein functionality such as foaming and emulsifying properties by succinylation of peanut protein isolates. Succinylated and unsuccinylated peanut protein isolate was tested for to find out the effect of pH, heat treatment and sodium chloride concentration on the solubility, foam expansion, foam stability, emulsion capacity and emulsion stability. The results are summarized as follows; 1. Succinylation enhanced the solubility of peanut protein isotate (PPI). The solubility of succinylated PPI markedly increased at pH 4.5. When the protein solutions was heated, the solubility of succinylated PPI greatly increased than PPI at pH 3. With addition of NaCl, solubility of succinylated PPI increased at pH 7 and pH 9. 2. The foam expansion of PPI and succinylated PPI on pH was no difference between both proteins. Addition of NaCl and heat treatment caused steeply increased in foam expansion at pH 3. 3. The foam stability of PPI and succinylated PPI showed the lowest value at pH 4.5. When PPI and succinylated PPI was heated, foam stability of two proteins incensed at pH 3 and showed similar aspects between PPI and succinylated PPI. However, at pH 9 stability of succinylated PPI decreased by heat treatment over $60^{\circ}C$. 4. Emulsion capacity of succinylated PPI on pH was markedly increased and showed the highest value at pH 11. At pH 4.5 which is isoelectric point of PPI, emulsion capacity of PPI by succinylation improved than that of PPI. When succinylated PPI was heated, emulsion capacity was greatly increased at pH 2 and pH 7. With NaCl was added, emulsion capacity of succinylated PPI increased than that of PPI. 5. Emulsion stability of PPI and succinylated PPI was affected by pH and showed its highest value at pH 11. At pH 4.5, emulsion stability of succinylated PPI increased than that of PPI. Addition of NaCl and heat treatment caused slightly increased in emulsion stability of succinylated PPI.

• 문화경제연구
• /
• 제17권2호
• /
• pp.29-62
• /
• 2014

대표적인 지식기반산업, 창조산업으로 인식되고 있는, 문화콘텐츠 산업의 하나인 게임산업은 전통적인 제조업의 해외진출과는 달리, 제품 혹은 프로젝트 기반으로 해외진출에 대한 전략과 성과가 달라진다. 따라서 이에 대한 접근도 각각의 콘텐츠 단위로 달리해야 하며, 어떠한 요인들로 인해 이들의 해외진출 의사결정과 결과가 달라지는지 살펴볼 필요가 있다. 이에 본 연구에서는 게임 산업에서 해외시장 진입 선택에 영향을 미치는 '전략적 지향성' 요인을 중심으로, 이들의 선행변수 및 후행변수에 대해 살펴보고자 한다. 본 논문에서는 팀 단위(team level)로 제품이 개발되어 각각의 해외시장별로 어떠한 전략적 지향성을 띄며 진입유형 선택에 이르게 되는지 살펴보기 위해 온라인 게임 252개의 케이스를 가지고 살펴봤다. 본 연구결과에 따르면, 팀 흡수역량이 혁신지향성에 미치는 관계를 제외한 모든 잠재변수들(창의성, 흡수역량, 시장지향성, 혁신지향성, 해외시장 성과)간의 인과관계가 유의하게 나타났다. 본 연구는 창의성과 흡수역량, 시장지향성 및 혁신지향성을 해외시장 진입 방식과 통합적으로 연결시킴으로써 기존의 전략 및 국제경영 관련 이론들을 보충하고, 문화콘텐츠 상품의 해외진입(배급) 전략을 설명하기 위한 이론적 및 실무적인 시사점을 제공해준다.

• 전기학회논문지
• /
• 제65권12호
• /
• pp.1949-1957
• /
• 2016

Rapid Expansion of EVs(Electric Vehicles) is inevitable trends, to comply with eco-friendly energy paradigm according to Paris Agreement and to solve the environment problems such as global warming. In this paper, we analyze the limit point of transformer acceptable capacity as the increase of power demand considering EVs supply in the near future. Through the analysis of transformer utilization, we suggest methods to analyze the spare capacity of transformer for the case of optimal efficiency operation and emergency operation respectively. We have the results of 18.4~29% spare capacity for the charging infrastructure to the rated capacity of transformer by analyzing the existing sample apartments. It is analyzed that the acceptable number of EVs is 0.09~0.14 for optimal efficiency operation and 0.06~0.13 for emergency operation. Therefore, it is analyzed the power demand of EV will exceed the existing transformer spare capacity in 7~8 years as the annual growth rate of EVs is prospected 112.5% considering current annual growth rate of EVs and the government EV supply policy.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권2호
• /
• pp.238-243
• /
• 2011

인버터형 가변속 압축기를 사용한 냉각기를 최적으로 제어하기 위한 선행 연구이며, 외기온도를 변화 시켰을 경우 압축기의 회전수 변화와 전자팽창밸브의 개도 변화가 전체 시스템에 미치는 영향에 대해 실험적으로 규명하였다. 외기온도 $35^{\circ}C$와 외기온도 $30^{\circ}C$의 30Hz에서는 제어 시 피해야할 영역으로 판단됨을 확인할 수 있었으며, 압축기 회전수 제어로 인한 용량 제어범위는 외기온도 $35^{\circ}C$에서의 약 43~100%, 외기온도 $25^{\circ}C$에서는 46~100%, 외기온도 $10^{\circ}C$에서는 48~100%로 외기온도가 낮아질수록 용량제어범위는 작아짐을 알 수 있었다.

• Korean Chemical Engineering Research
• /
• 제56권1호
• /
• pp.139-142
• /
• 2018

Silicon (Si) is a promising anode material for next-generation lithium ion batteries (LIBs) because of its high capacity of 4,200 mAh/g ($Li_{4.4}Si$ phase). However, the large volume expansion of Si during lithiation leads to electrical failure of electrode and rapid capacity decrease. Generally, a binder is homogeneously mixed with active materials to maintain electrical contact, so that Si needs a particular binding system due to its large volume expansion. Polyvinyl alcohol (PVA) is known to form a hydrogen bond with partially hydrolyzed silicon oxide layer on Si nanoparticles. However, the decrease of its cohesiveness followed by the repeated volume change of Si still remains unsolved. To overcome this problem, we have introduced the electrospinning method to weave active materials in a stable nanofibrous PVA structure, where stresses from the large volume change of Si can be contained. We have confirmed that the capacity retention of Si-based LIBs using electrospun PVA matrix is higher compared to the conservative method (only dissolving in the slurry); the $25^{th}$ cycle capacity retention ratio based on the $2^{nd}$ cycle was 37% for the electrode with electrospun PVA matrix, compared to 27% and 8% for the electrodes with PVdF and PVA binders.

• 기술혁신연구
• /
• 제26권4호
• /
• pp.173-198
• /
• 2018

본 연구는 세계 42개국의 자료를 사용하여 산업용 로봇 도입의 결정요인을 분석하고, 한국에서 산업용 로봇이 빠르게 확산되고 있는 원인을 진단하였다. 산업용 로봇 변수는 국제로봇협회(IFR)의 2001년-2016년 "World Robotics: Industrial Robots" 자료를 사용하였다. 설명변수는 노동시장환경 변수와 혁신역량 변수를 포함하며, 관련 변수들은 해당 국제기관들의 자료에서 추출하였다. 실증분석에는 일부 설명변수의 내생성을 통제하기 위해 Arellano-Bond 동적 패널분석을 사용하였다. 분석결과, 한국은 소득수준이나 고용비용 및 혁신역량 등을 고려하더라도 다른 국가들에 비해 산업용 로봇 도입이 매우 빠르게 확대되어 온 것을 확인할 수 있었다. 이는 수요 측면과 공급 측면 모두에서 그 원인을 찾을 수 있다. 즉, 고용비용 증가 등의 노동시장환경 변화가 산업용 로봇 도입에 대한 기업 수요를 견인하였으며, 경제 전반의 자본집약도 증가와 기업의 혁신역량 증대와 같은 공급 측면 요인 또한 산업용 로봇의 도입을 촉진시켰다.

• 기술사
• /
• 제15권1호
• /
• pp.36-40
• /
• 1982

This study is to characterize Ago stability useful for manufacturing silver oxide button cell, and deter mined by test tube gassing evaluations and by cell expansion and further discuss en the effectiveness of pellet reduction treatments to obtain single plateau discharge Profile and relevent performance.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2007년도 학술논문요약집
• /
• pp.67-68
• /
• 2007