• Food Science of Animal Resources
• /
• v.27 no.3
• /
• pp.284-289
• /
• 2007

This study was conducted to investigate the effects of copper and zinc supplementation on growth performance, nutrient digestibility, and meat and carcass characteristics in finishing pigs. A total of 72 $(Landrace{\times}Yorkshire{\times}Duroc)$ pigs (58.47 kg initial BW) were assigned to 6 treatments in a $2{\times}3$ factorial design $(Zn\;levels{\times}Cu\;levels)$. The sources of zinc and copper were Zn-methionine chelate and Cu-methionine chelate, respectively. Zinc levels used were 80 and 120 ppm and copper levels used were 10, 30 and 60 ppm. Throughout the entire experimental period, the average daily gain (ADG) and average daily feed intake (ADFI) were not significantly affected by Cu or Zn levels, or their relative levels. The G:F ratio was significantly affected by the relative levels of Cu and Zn (p<0.05), specifically at 30 ppm Cu and 120 ppm Zn. Dry matter digestibility was significantly affected by the levels of Cu (p<0.02), Zn (p<0.01) and the relative levels of each (p<0.04), in particular at 30 ppm Cu and 120 ppm Zn. Nitrogen digestibility was significantly affected by Zn levels (p<0.01) and the combination of 30 ppm Cu and 120 ppm Zn (p<0.03). The $L^*-value$, shear force, cooking loss and pH were not significantly affected by Cu levels, Zn levels or their combination. The $a^*- (p<0.04)\;and\;b^*- values (p<0.01)$ were significantly affected by Zn levels at 80 ppm. The Water hoding capacity was significantly affected by Cu and Zn in combination (p<0.01) at 10 ppm Cu and 120ppm Zn. The carcass weight, backfat thickness and carcass grade were not significantly affected by Cu levels, Zn levels or their relative levels. The carcass percentage was significantly affected by the combination (p<0.04) of 30ppm Cu and 120ppm Zn. In conclusion, dietary supplementation of Cu and Zn at 30 and 120 ppm, respectively, is effective for feed efficiency, nutrient digestibility and carcass percentage, while at the levels of Cu at 10 ppm and Zn at 120 ppm have effects on WHC.

• Journal of Acupuncture Research
• /
• v.19 no.2
• /
• pp.51-64
• /
• 2002

We have compared(using the same series of experimental tissue samples) the levels of proteolytic enzyme activities and free radical-induced protein damage in synovial fluid from RA and CPH cases. Many protease types showed significantly increased (typically by a factor of approximately 2-3-fold) activity in RA, compared to normal rats. However, CPH significantly reduced the cytoplasmic enzyme activities of arginyl aminopeptidase, leucyl aminopeptidase, pyroglutamyl aminopeptidase, tripeptidyl aminopeptidase, and proline endopeptidase to almost about 1/10 each. For the Iysosomal proteases, synovial fluid samples from RA rats, CPH significantly reduced the enzyme activities of cathepsin B, dipeptidyl aminopeptidase I and dipeptidyl aminopeptidase II. In extracellular matrix degrading(collagenase, tissue elastase) and leukocyte as sociated proteases (leukocyte elastase, cathepsin G), CPH decreased these enzyme activities of collagenase, tissue elastase and leukocyte associated elastase in RA. In cytoplasmic and lysosomal protease activities in plasma from RA. CPH and normal plasma samples were not significantly different, suggesting that altered activity of plasma proteases (particularly those enzymes putatively involved in the immune response) is not a contributory factor in the pathogenesis of RA. In addition, the level of free radical induced damage to synovial fluid proteins was approximately twice that in RA, compared with CPH. CPH significantly decreased the level of ROS induced oxidative damage to synovial fluid proteins (quantified as protein carbonyl derivative). Therefore we conclude that both proteolytic enzymes and free radicals are likely to be of equal potential importance as damaging agents in the pathogenesis of inflammatory joint disease, and that the design of novel therapeutic strategies for patients with the latter disorder should include both protease inhibitory and free radical scavenging elements. In addition, the protease inhibitory element should be designed to inhibit the action of a broad range of protease mechanistic types (i.e. cysteine-, metallo- and serine- proteinases and peptidases). However, increased protein damage induced by ROS could not be rationalised in terms of compromised antioxidant total capacity, since the latter was not significantly altered in RA synovial fluid or plasma compared with CPH.

• Journal of Korea Water Resources Association
• /
• v.48 no.12
• /
• pp.1065-1075
• /
• 2015

In the estuary where the structure such as river-mouth weir has been installed, the flow is developed very complicatedly due to river water from upstream, tide of the sea and floodgate operation. Especially, if basin outlets more than one exists in one estuary, the boundary conditions will be significantly more complex form. Saemangeum(SMG) project area in Korea is the most typical example. There are Mankyung river and Dongjin river in upstream. The water of them inflows into SMG project area. In the downstream, river flow was drained from inland to sea over the SMG sea dike through the sluice. The connecting channel was located between Mankyung and Dongjin basins. It functions not only as transportation by ship in ordinary period but also as flood sharing by sending flood flow to each other in flood period. Therefore, in order to secure the safety against flood, it is very important to understand the flood sharing capacity for connecting channel. In this study, the flood control effect was analyzed using numerical simulation. Delft3D was used to numerical simulation and simulated period was set up with neap tide, in which the maximum flood stage occurred due to poor drainage. Actually, three connecting channels were designed in land use plan of the SMG Master Plan, but they were simplified to a single channel for conciseness of analysis in this study. According to the results of numerical analysis, the water level difference between two basins was increased and the maximum flood stage at dike sluice was also upraised depending on decrease of conveyance. And the velocity induced by same water level difference was decreased when the conveyance became smaller. In certain conveyance above, there was almost no flood control effect. Therefore, if the results of this study are considered for design of connecting channel, it will be expected to draw the optimal conveyance for minimizing dredging construction cost while maximizing the flood control effect.

• Economic and Environmental Geology
• /
• v.51 no.4
• /
• pp.381-392
• /
• 2018

This study examines strategies and implementation plans for commercializing $CO_2$ capture and storage, which is an effective method to achieve the national goal of reducing greenhouse gas. In order to secure cost-efficient business model of $CO_2$ capture and storage, we propose four key strategies, including 1) urgent need to select a large-scale storage site and to estimate realistic storage capacity, 2) minimization of source-to-sink distance, 3) cost-effectiveness through technology innovation, and 4) policy implementation to secure public interest and to encourage private sector participation. Based on these strategies, the implementation plans must be designed for enabling $CO_2$ capture and storage to be commercialized until 2030. It is desirable to make those plans in which large-scale demonstration and subsequent commercial projects share a single storage site. In addition, the plans must be able to deliver step-wised targets and assessment processes to decide if the project will move to the next stage or not. The main target of stage 1 (2019 ~ 2021) is that the large-scale storage site will be selected and post-combustion capture technology will be upgraded and commercialized. The site selection, which is prerequisite to forward to the next stage, will be made through exploratory drilling and investigation for candidate sites. The commercial-scale applicability of the capture technology must be ensured at this stage. Stage 2 (2022 ~ 2025) aims design and construction of facility and infrastructure for successful large-scale demonstration (million tons of $CO_2$ per year), i.e., large-scale $CO_2$ capture, transportation, and storage. Based on the achievement of the demonstration project and the maturity of carbon market at the end of stage 2, it is necessary to decide whether to enter commercialization of $CO_2$ capture and storage. If the commercialization project is decided, it will be possible to capture and storage 4 million tons of $CO_2$ per year by the private sector in stage 3 (2026 ~ 2030). The existing facility, infrastructure, and capture plant will be upgraded and supplemented, which allows the commercialization project to be cost-effective.

• Journal of Animal Science and Technology
• /
• v.50 no.4
• /
• pp.527-534
• /
• 2008

Effects of dietary concentrate levels based on whole-crop barley silage (BS) on development and meat quality in growing Korean black goats were examined. A total of 36 male goats with similar age and BW were equally allocated to dietary four treatments in a randomized complete block design. Dietary treatments included controls(rice straw ad libitum plus 2.0% concentrate BW－1), and BS ad libitum plus three increasing levels of concentrate BW－1(2.0, 1.5 and 1.0%, respectively), expressed as BS 2.0, BS 1.5 and BS 1.0, respectively. The trial was lasted for 5 months from 14th of May to 12th of October, 2007. At the end of trial, all animals were slaughtered to analyze carcass characteristics and meat quality. Average daily gain was significantly(p<0.05) higher for BS 1.5 and BS 2.0 treatments than for controls. Daily feed intakes for controls(689.3 g) were significantly(p<0.05) higher than those of BS 1.0(585.5 g), but they were significantly(p<0.05) lower than BS 2.0(734.3 g). Carcass and meat percentages were significantly (p<0.05) higher for BS 2.0 and BS 1.5 than for control and BS 1.0 treatments. Shear force and water-holding capacity was greater(p<0.05) for BS 2.0 and BS 1.5 than other treatments. On the basis of feeding whole-crop barley silage to Korean black goats, as dietary concentrate inclusion levels increased, sensory results showed to have a better tendency. In conclusion, it was estimated that the optimal level of dietary concentrates might be 1.5% BW－1, when diets based whole-crop barley silage were fed to growing Korean black goats for their improvements of growth and meat quality.

• Food Science of Animal Resources
• /
• v.28 no.5
• /
• pp.543-548
• /
• 2008

This study was conducted to evaluate the effects of com distillers dried grain with soluble (DDGS) in American and Chinese on quality and amino acid of meat in finishing pigs. 120 pigs (Landrace$\times$Yorkshire$\times$Duroc, 64.50 kg average initial body weight) were used in 56 day growth assay. Dietary treatments were included CON (basal diet), ADS (basal diet + DDGS from American) and CDS (basal diet + DDGS from Chinese). The pigs were allotted into four pigs per pen with ten replicates per treatments by completely randomized design. Backfat thickness and lean percentage were not affected by treatment (p>0.05). For the meat color, redness was significantly increased in DDGS treatments compared to CON treatment (p<0.05). CDS treatment was higher than in ADS treatment (p<0.001). Water holding capacity was higher in CON and CDS treatments compared to ADS treatment (p<0.05). pH was greater in DDGS treatments than CON treatment (p<0.05), and ADS treatment was higher than in CON treatment (p<0.05). For the amino acid of meat, CDS treatment significantly increased their arginine, isoleucine, leucine and lysine compared to other treatments (p<0.05). DDGS treatment was higher than in CON treatment (p<0.001). Methinonine, phenylalanine, threonine and valine were significantly increased DDGS treatments than CON treatment (p<0.05). Cysteine was greater in CDS treatment than CON and ADS treatments (p<0.001). DDGS treatments was higher cysteine than in CON treatment (p<0.001). Proline significantly improved in CON treatment compared to CDS treatment (p<0.05). Tyrosine was greater in DDGS treatments than CON treatment (p<0.01). In conclusion, redness and amino acids of meat were affected by DDGS treatments.

• Journal of Korea Port Economic Association
• /
• v.35 no.4
• /
• pp.1-16
• /
• 2019

The purpose of this study is to Analyze the problems that container shipping companies exist through the commercialization of container shipping for Non-Arctic countries and the opportunity factors for the transport of the Arctic shipping to improve cooperation cross-border relation Arctic policy and the use of transport. In order to design a hierarchy analysis method study model, four high and 17 low factors were extracted by designing a hierarchy analysis method study model based on results by prior study and in-depth interview. The first of the higher factors is the internal strength of assessing the value of the Arctic, the will and capabilities of the shipping companies in creating new markets with the vision and goals of the shipping companies. Second, the internal constraints associated with the shipping companies advance to the NSR mean the negative factors for the entry into the NSR and the internal weaknesses that cause the shipping companies capacity limitations. Third, the economic benefits from the use of NSR are external factor for shipping companies in cooperation with the future economic value of the Arctic and with respect to Arctic sea and Arctic advance and development from Arctic coastal countries. Finally, external pre-emptive tasks means to respond to use NSR by external restrictions on transport to prepare the possibility of severe weather conditions, the customs policy change of coastal countries.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.994-1001
• /
• 2008

Freundlich isothermal adsorption parameters, applicable to such biofilter-model as process-lumping model(Lim's model), for sterilized granular activated carbon(GAC), sterilized compost and sterilized equal volume mixture of GAC and compost were obtained and were compared each other, assuming that adsorbents are enclosed by water layer, in order to construct robust process-lumping biofilter model effective for wide-range of hydrophilic volatile organic compounds(VOC). In this investigation 0.04, 0.08, 0.12, 0.16, 0.2, 0.4, 0.8 and 1.0ml of ethanol were added to three kinds of adsorbent-media and were placed at $30^{\circ}{\cdots}$ under the wet condition of the media, which was the same as biofilter operating condition, until the adsorption reached the condition of equilibrium before each adsorbed amount of ethanol was obtained. Then adsorption capacity parameters(K) and adsorption exponents of Freundlich adsorption isotherm equation, which simulates the adsorbed amount of ethanol equilibrated with the ethanol concentration of the condensed water in the pore of the media, were constructed for sterilized granular activated carbon(GAC), sterilized compost and sterilized equal volume mixture of GAC and compost as (0.7566 and $5.070{\times}10^{-7}mg-ethanol/mgmedia/(mg-ethanol/m^3)^{0.7566}$), (0.8827 and $1.000{\times}10^{-8}mg-ethanol/mgmedia/(mg-ethanol/m^3)^{0.8827}$) and (0.5688 and $5.243{\times}10^{-6}mg-ethanol/mgmedia/(mg-ethanol/m^3)^{0.5688}$), respectively. These Freundlich isothermal adsorption parameters were applicable to the adsorption characteristics of biofilter media enclosed with bio-layer. The order of magnitude of the ratio of ethanol-air/water partition coefficient and toluene-air/water partition coefficient was almost consistent to that of ethanol-adsorbed amounts in this experiment with compost and in the investigation of Delhomenie et al. on toluene-adsorption to wet compost.

• Korean Journal of Food Science and Technology
• /
• v.47 no.2
• /
• pp.233-239
• /
• 2015

This study determined the optimum extraction conditions based on five response variables (yield, total phenolics, 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) free radical scavanging activity, oxygen radical absorbance capacity (ORAC), and ${\beta}$-1,3-glucan content) in chaga mushroom (Inonotus obliquus) using the response surface methodology, where three independent variables (ethanol concentration, extraction temperature, and extraction time) were optimized using a central composite design. The optimum ethanol concentration, extraction temperature, and extraction time were 50% (w/w), $88.7^{\circ}C$, and 14.5 h; 9.2%, $92.7^{\circ}C$, and 14.5 h; 50.8%, $92.7^{\circ}C$, and 14.5 h; 9.2%, $92.7^{\circ}C$, and 1.5 h; and 90.8%, $92.7^{\circ}C$, and 1.5 h for yield, total phenolics, ABTS, ORAC, and ${\beta}$-1,3-glucan content, respectively. The predicted values of the response variables were compared with those of the extracts under the optimal extraction conditions to verify the models. The optimum extraction condition for the five response variables was predicted to be 81.4% ethanol at $92.7^{\circ}C$ for 14.5 h.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.53-62
• /
• 2018

Follofwing the accelerating speed-up of trains and rising demand for large-volume transfer capacity, not only in Korea, but also around the world, track structures for trains have been improving consistently. Precast concrete slab track (PST), a concrete structure track, was developed as a system that can fulfil new safety and economic requirements for railroad traffic. The purpose of this study is to provide the information required for the development and design of the system in the future, by analyzing the behavior of each structural member of the PST system. The stress distribution result for different combinations of appropriate loads according to the KRL-2012 train load and KRC code was analyzed by conducting a three-dimensional finite element analysis, while the result for different thicknesses of the grouting layer is also presented. Among the structural members, the largest stress took place on the grouting layer. The stress changed sensitively following the thickness and the combination of loads. When compared with a case of applying only a vertical KRL-2012 load, the stress increased by 3.3 times and 14.1 times on a concrete panel and HSB, respectively, from the starting load and temperature load. When the thickness of the grouting layer increased from 20 mm to 80 mm, the stress generated on the concrete panel decreased by 4%, while the stress increased by 24% on the grouting layer. As for the cracking condition, tension cracking was caused locally on the grouting layer. Such a result indicates that more attention should be paid to the flexure and tension behavior from horizontal loads rather than from vertical loads when developing PST systems. In addition, the safety of each structural member must be ensured by maintaining the thickness of the grouting layer at 40 mm or more.