• Journal of Wetlands Research
• /
• v.9 no.1
• /
• pp.69-78
• /
• 2007

Constructed wetlands and other aquatic systems have been successfully used for waste and wastewater treatment in either temperate or tropical regions. To treat waste or wastewater in a sustainable manner, the integrated eco-engineering designs are explained in this paper with 2 case studies: (i) a combination of vertical-flow constructed wetland (CW) with plant irrigation systemfor fecal sludge management and (ii) integrated CW units with landscaping at full-scale application for domestic wastewater treatment. The pilot-scale study of fecal sludge management employed 3 vertical-flow CW units, each with a dimension of $5{\times}5{\times}0.65m$ (width ${\times}$ length ${\times}$ media depth) and planted with cattails (Typha augustifolia). At the solid loading rate of 250 kg total solids (TS)/$m^2.yr$ and a 6-day percolate impoundment, the CW system could achieve chemical oxygen demand (COD), TS and total Kjeldahl nitrogen (TKN) removal efficiencies in the range of 80 - 96%. The accumulated sludge layers of about 80 - 90 cm was found at the CW bed surface after operating the CW units for 7 years, but no clogging problem has been observed. The CW percolate was applied to 16 irrigation Sunflower plant (Helianthus annuus) plots, each with a dimension of $4.5{\times}4.5m$ ($width{\times}length$). In the study, the CW percolate were fed to the treatment plots at the application rate of 7.5 mm/day but the percolate was mixed with tap water at different ratio of 20%, 80% and 100%. Based on a 1-year data of 3-crop plantation were experimented, the contents of Zn, Mn and Cu in soil of the experimental plots were found to increase with increasing in CW percolate ratios. The highest plant biomass yield and oil content of 1,000 kg/ha and 35%, respectively, were obtained from the plots fed with 20% or 50% of the CW percolate, whereas no accumulation of heavy metals in the plant tissues (i.e. leaves, stems and flowers) of the sunflower is found. In addition to the pilot-scale and field experiments, a case study of the integrated CW systems for wastewater treatment at Phi Phi Island (a Tsunami-hit area), Krabi province, Thailand is illustrated. The $5,200-m^2$ CW systems on Phi Phi Island are not only for treatment of $400m^3/day$ wastewater from hotels, households or other domestic activities, but also incorporating public consultation in the design processes, resulting in introducing the aesthetic landscaping as well as reusing of the treated effluent for irrigating green areas on the Island.

• Journal of Global Scholars of Marketing Science
• /
• v.17 no.1
• /
• pp.51-75
• /
• 2007

Dongdaemun fashion market has been successfully positioned as a main hub for non-brand fashion product distribution in Korea. One of important competitive advantages of Dongdaemun market often quoted by retail researchers is an efficiently managed network system among supply chain members. This study aimed to examine the importance of buyer-supplier relationship elements and supplier properties from buyers' perspectives (small & very small-sized fashion stores in Dongdaemun market), and to identify the determinants of the relationship length between suppliers and buyers. Survey responses of 233 stores were analyzed using EQS 6.1 for Window and SPSSWIN 10.0. The findings could be summarized as follows: First, fashion stores perceived that right delivery as the most important factor, and geographically closeness, design capability, quality, and lower price followed in order. Second, the characteristics of stores such as location, wholesaling versus retailing focusing, monthly sales, and total business length all affected the perceived importance of buyer-supplier relationship. Third, design capacity, communication, power was identified as determinants of actual relationship length with a supplier, while communication and trust were found to be determinants of future expected relationship length.

• Journal of the Korea Concrete Institute
• /
• v.21 no.4
• /
• pp.473-480
• /
• 2009

The 180 minutes fire test based on the standard curve of ISO-834 were conducted on three RC column specimens with different constant axial loading ratios to evaluate the fire performance of fiber cocktail (polypropylene+steel fiber) reinforced high strength concrete column. The columns were tested under three loading levels as 40%, 50%, and 61% of the design load. No explosive spalling has been observed and the original color of specimen surface has been changed to light pinkish grey. The maximum axial displacements of three specimens were 1.5~2.2 mm. There was no reduction in load bearing capacity of each specimen exposed to fire and no effect were observed on the fire performance within 61% of the design load. The tendencies of the results with loading, such as the temperature distribution of in concrete and the changes in temperature rise due to the water vaporization in concrete, are very similar to those without loading. The final temperatures of steel rebar after 180 minutes of fire test resulted in 491.4${^{\circ}C}$ for corner rebar, 329.0${^{\circ}C}$ for center rebar, and 409.8${^{\circ}C}$ for total mean of steel rebar. The difference of mean temperature between corner and center rebar was 153.7${^{\circ}C}$ㅍ. The tendency of temperature rise in concrete and steel rebar changed after 30~50 minutes from the starting time of the fire test because the heat energy influx into corner rebar is larger than that into center rebar. The cause of decrease in temperature rise was due to the water vaporization in concrete, the lower temperature gradient of the concrete with steel and polypropylene fiber cocktails, the moisture movement toward steel rebars and the moisture clogging.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.4 s.26
• /
• pp.101-112
• /
• 2005

Recently, a curtain wall construction is a exterior finishing components which is most used for shortening time in high-rise building as well as the class of key management factors in cost and schedule control. Also, it is recognized that an effective management for curtain wall process is a major subject to accomplish the project successfully. However, as the current management for curtain wall construction is focused on the construction stage, it makes problems such as errors in business performance, rework by mistakes and duplications, errors and omissions by ineffective information management and there has never been any efficient management from a view of the entire Curtain Wall Life-cycle process. Therefore, the aim of this study is to suggest a stage check point for process improvement in the curtain wall Life-cycle process through current curtain wall process analysis, and then to investigate the cause of waste factors using the Muda method from the Toyota Production System and extract the weighted effects of the waste factors using the analytical hierarchy process method. According to the result, Most of the inefficient factors happened in architectural design stage of the entire curtain wall Life-cycle process and my research identified that detail factors of them are a delay of decision making and an approval in changes, a deficit of engineering capacity and a delay of approval in architectural design drawings by owner, etc.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.585-597
• /
• 2008

The aim of this study was to find an analytic solution to the problem of determining the optimal capacity (lot-size) of a batch-storage network to meet demand for a finished product in a system undergoing random failures of operating time and/or batch material. The superstructure of the plant considered here consists of a network of serially and/or parallel interlinked batch processes and storage units. The production processes transform a set of feedstock materials into another set of products with constant conversion factors. The final product demand flow is susceptible to short-term random variations in the cycle time and batch size as well as long-term variations in the average trend. Some of the production processes have random variations in product quantity. The spoiled materials are treated through regeneration or waste disposal processes. All other processes have random variations only in the cycle time. The objective function of the optimization is minimizing the total cost, which is composed of setup and inventory holding costs as well as the capital costs of constructing processes and storage units. A novel production and inventory analysis, the PSW (Periodic Square Wave) model, provides a judicious graphical method to find the upper and lower bounds of random flows. The advantage of this model is that it provides a set of simple analytic solutions while also maintaining a realistic description of the random material flows between processes and storage units; as a consequence of these analytic solutions, the computation burden is significantly reduced.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2B
• /
• pp.279-288
• /
• 2004

Rapidly emerging P2P(Peer to Peer) applications generate very bursty traffic, which gives a lot of burden to network, and the amount of such traffic is increasing rapidly. Thus it is becoming more important to understand the characteristics of such traffic and reflect it when we design and analyze the network. To do that we measured the traffic in a campus network and present flow statistics and traffic models of the measured traffic, and compare them with those of the web traffic. The results indicate that P2P traffic is much burstier than web traffic and as a result it negatively affects network performance. We modeled P2P traffic using self-similar traffic model to predict packet delay and loss occurred in network which are very important to evaluate network performance. We also predict queue length distribution and loss probability in SSQ(Single Sewer Queue). To assess accuracy of traffic model, we compare the SSQ statistics of traffic models with that of the traffic trace. The results show that self-similar traffic models we use can predict P2P traffic behavior in network precisely. It is expected that the traffic models we derived can be used when we design network capacity and predict network performance and QoS of the P2P applications.

• Spatial Information Research
• /
• v.23 no.4
• /
• pp.47-56
• /
• 2015

Recently, there has been an increase in the number of people who use the smart-phone navigation for using various latest functions such as group driving and location sharing. But smart-phone has a limited storage space for one application, since a lot of applications with different purposes are installed in the smart-phone. For this reason, road network data with a large space of memory used for map matching in the device for navigation cannot be stored in the smart-phone for this reason map matching is impossible. Besides, smart-phone which doesn't use the external GPS device, provides inaccurate GPS information, compared to the device for navigation. This is why the smart-phone navigation is hard to provide accurate location determination. Therefore, this study aims to help map matching that is more accurate than the existing device for navigation, by reducing the capacity of road network data used in the device for navigation through format design of a new road network and conversion and using a database of driver's driving patterns. In conclusion, more accurate map matching was possible in the smart-phone by using a storage space more than 80% less than existing device at the intersection where many roads cross, the building forest that a lot of GPS errors occur, the narrow roads close to the highway. It is considered that more accurate location-based service would be available not only in the navigation but also in various applications using GPS information and map in the future Navigation.

• Journal of the Korean Society of Costume
• /
• v.38
• /
• pp.193-211
• /
• 1998

Without a solid marketing system in placed, the fashion industry cannot flourish on out-standing design or technology alone. Even though the significance of collecting and analyzing information, merchandising, and retail distribution is recognized, these functions are not firmly rooted or prevalent in our industry. In contrast, Italy which possesses similar demographic traits such as the lack of natural resources and other physical factors has succeed-ed in globalizing its fashion market by responding swiftly and exercising flexiblity to its constantly changing consumer demand. This in turn has earned Italy the competitive edge in the global fashion arena. Italy's unique management skills and operation know-how, along with successful market strategies come into play in bringing competitiveness to Italy's fashion market. Firstly, smaller companies with ability to adopt swiftly to the ever changing market. Secondly, fashion friendly social environment. Thirdly, niche marketing through highly specialized system and differentiation. Fourthly, timeless innovation through intense corporate competition. Lastly, establishment of foundations to support the industry through diverse networking. The alone building blocks have formed a basis for erecting an unparalleled market with a reputation for excellence in design and quality in the global fashion world. This study has examined how Italy's fashion industry has evolved from an underdeveloped textile business into a cutting edge fashion in-dustry. Italy's unique business processes and practices were studied to come up with a collection and merchandising ideas in a niche market. By selecting this venue we are able to continuously grow and develop in a market with diverse consumer needs. To analyze the Italian fashion market, data from 3 institutions were utilized, namely, CIT-ER which has provided consumer trends and sales analysis, SITA,a data service provided statistics from the textile and apparel businesses, and NBI has also furnished valuable data. Italian consumer preference, buying behavior, consumer profile, retail channels and other related data from the above institutions has formed a backbone for market segmentation and target markets, and as a result, we were able to zero in on the type of consumer, produce, pricing and retail channels for our womenswear. Going forward the direction is to elevate product image and pretige, and create syn-ergy between related industries, and at the same note, in order to develop internationally recognized brands such as Max Mara and Benetton. Certain elements such as the specialization of the fashion industry, alon-g with fashion-related data base and systems support, and most importantly experts with acute fashion sense and capacity to analyze pertinent data are in need. I firmly believe that we can achieve Italy's level in the fashion market with support from the government and unrelenting effort within the industry itself, and hope that this report can prove to be useful.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.6
• /
• pp.649-656
• /
• 2011

A model for the numerical simulation of lithium-ion batteries (LIBs) is developed for use in battery cell design, with a view to improving the performances of such batteries. The model uses Newman-type electrochemical and transfer $theories^{(1,2)}$ to describe the behavior of the lithium-ion cell, together with the Levenberg-Marquardt optimization scheme to estimate the performance or design parameters in nonlinear problems. The mathematical model can provide an insight into the mechanism of LIB behavior during the charging/discharging process, and can therefore help to predict cell performance. Furthermore, by means of least-squares fitting to experimental discharge curves measured at room temperature, we were able to obtain the values of transport and kinetic parameters that are usually difficult to measure. By comparing the calculated data with the life-test discharge curves (SB LiMotive cell), we found that the capacity fade is strongly dependent on the decrease in the reaction area of active materials in the anode and cathode, as well as on the electrolyte diffusivity.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.3
• /
• pp.269-282
• /
• 2008

In general, the effects of steel ribs are not considered in the numerical analysis of tunnel design. However, attempts have been increased recently to consider these effects in the analysis of shallow tunnels in soft ground, based on the fact that the steel ribs embedded in the shotcrete take a role to support some portion of the redistributed load due to excavation. In such analyses, the steel ribs can be considered in four different methods: (1) a conventional method where the steel ribs are not considered, (2) a method using the equivalent composite cross section in which the bending moment of shotcrete is not considered, (3) a method using the equivalent composite cross section in which both the compressive stress and the bending moment for the shotcrete and steel rib are considered, and (4) a method using beam elements for the shotcrete and the steel rib, respectively. These methods are adopted in the numerical analysis using FLAC 2D to investigate stresses of both the shotcrete and the steel rib. The overall results show that the analyses are more practical and economical when the effects of steel rib are considered fer the methods (2), (3), and (4). Since the results of those analyses considering steel rib capacity may be different according to the ground condition, it will be necessary to consider the appropriate method among them in accordance with design conditions.