• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.5
• /
• pp.841-846
• /
• 2010

Reliability in electrical power system refers to normal operation for schedule time in some system that action consists. It means that if there is no contingency of electric power supply decrease or load curtailment, reliability of the system is high. In this paper, a method for evaluation of transmission capability is proposed considering reliability standards. Deterministic and probabilistic methods for evaluation of transmission capability has been studied. These researches considered uncertainty of system components or N-1 contingency only. However, the proposed method can inform customers and system operators more suitable transmission capability. Well-being method using state probabilities of system components proves to be a more effective method in this paper comparing with calculation of LOLE(Loss of Load Expectation). The length of calculation is shorter but it can give more practical information to the exact system operators. Well-being method is applied to IEEE-RTS 24bus system to evaluate reliability in case study. The result is compared with a existing way to evaluate reliability with LOLE and it shows that transmission capability connected with adjacent networks. This paper informs system operators and power suppliers of reliable information for operating power system.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.1
• /
• pp.51-58
• /
• 2021

As vertical extension remodeling policy was implemented in 2014, Safety Inspection Manual was established to ensure structural safety during the vertical extension remodeling. In the manual, the story weight for capability evaluation was based on the Safety Inspection Manual for Reconstruction. Although capability evaluation in the vertical extension remodeling is more important than reconstruction, engineering basis for the story weight is insufficient. Therefore it is necessary to improve the method of calculating the story weight. In this study, story importance and story weight were defined through the case analysis of capability evaluation in order to provide engineering basis for story weight. Also, new story weight equation was presented considering the load-bearing ratio of structural members.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.1
• /
• pp.94-100
• /
• 2000

This study was carried out to understand the present status of the quality evaluation capability of domestic fine paper industry. Six light weight coated papers and one wood containing printing and writing paper with similar basis weights were produced by seven paper companies and their properties were evaluated at four different testing laboratories of domestic fine paper mills. Paper properties including basis weight , thickness , tensile, tear , brightness , opacity, etc were examined , and the repeat ability and reproducibility of the test results were analyzed. Results showed that repeatability of the measurements within the laboratory was satisfactory . Reproducibility of the measurements between laboratories, however, was not satisfactory. This showed that strict implementation of the standard testing methods and periodic calibration of testing equipments should be made to improve quality evaluation capability of domestic fine paper industry.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.7
• /
• pp.333-340
• /
• 2002

To secure a service continuity is one of the most important mission in the ower distribution system operation. In this paper the necessary and sufficient condition to guarantee 100% service restoration capability for any fault on the system is reported. An evaluation methodology of the restoration capability(or restorability) is developed based on the developed restoration conditions. Applications of the developed concept to the system operation in the normal and emergency states, that would enhance the supply reliability of the system are described. They include enhancement of restoration capability adapting to load change, identification of best open switch and supervised switch positions.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3
• /
• pp.349-355
• /
• 2013

Recently, there is an increasing need to produce more precise products with small deviations from defined target values. Machine capability is the ability of a machine tool to produce parts within a tolerance interval. Capability indices are a statistical way of describing how well a product is machined compared to defined target values and tolerances. Today, there is no standardized way to acquire a machine capability value. This paper describes a method for evaluating machine capability indices in machining centers. After the machining of specimens, the straightness, roundness, and positioning accuracy were measured by using CMM (coordinate measuring machine). These measured values and defined tolerances were used to evaluate the machine capability indices. It will be useful for the industry to have standardized ways to choose and calculate machine capability indices.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.10a
• /
• pp.251-254
• /
• 2000

In the knowledge-based economy, technological capability is critical for the survival and growth of firms. Technological capability differs across firms depending on the structural and environmental conditions. In nature, the evaluation of technological capability is an intractable task and thus previous studies often employ such proxy measures as patent, productivity, or profitability. In this research, we define technological capability as a combination of the above three measures and investigate, by using the multi-variate statistical analysis, the characteristics of technological capability of electronics/IT firms of Korea. We first propose a taxonomy in which firms are classified into four clusters based on the differences in the nature of technological capability. Then, across clusters, we comparatively analyze the relationship between technological capability and structural/environmental factors of firms. Finally, the implications of empirical findings will be discussed. This study is a small-scale, descriptive one but will be extended and elaborated by augmenting the database and/or incorporating more variables.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2003.10a
• /
• pp.471-474
• /
• 2003

An attempt was made to evaluate on water supply capability of river management flow of four agricultural dam at the Yongsan River which is required instream flow because of water pollution. As a result, supply capability of agricultural use was sufficient, but supply capability of river management flow was insufficient.

• Journal of the Korean Society of Systems Engineering
• /
• v.15 no.2
• /
• pp.9-16
• /
• 2019

The most important task in acquiring the weapon system is to determine the required performance and to test & evaluate it. The importance of the weapon system by ROC (Required Operational Capability) is not considered, and system development and test evaluation are carried out. In addition, technical incidental performance is tested on the same basis as ROC in the test evaluation and determined according to the result. Development test and evaluation that evaluates technical ability is very important, but development agency is supervised and performed. In this paper, we propose a method to give weights considering the importance of ROC, a technical incidental performance determination and test procedure, and a improvement plan for the development and operational test & evaluation.

• Computers and Concrete
• /
• v.14 no.6
• /
• pp.727-743
• /
• 2014

The management of existing concrete bridges has become a major social concern in many developed countries due to the large number of bridges exhibiting signs of significant deterioration. This problem has increased the demand for effective maintenance and renewal planning. In order to implement an appropriate management procedure for a structure, a wide array of corrective strategies must be evaluated with respect to not only the condition state of each defect but also safety, economy and sustainability. This paper describes a new performance evaluation system for existing concrete bridges. The system evaluates performance based on load carrying capability and durability from the results of a visual inspection and specification data, and describes the necessity of maintenance. It categorizes all girders and slabs as either unsafe, severe deterioration, moderate deterioration, mild deterioration, or safe. The technique employs an expert system with an appropriate knowledge base in the evaluation. A characteristic feature of the system is the use of neural networks to evaluate the performance and facilitate refinement of the knowledge base. The neural network proposed in the present study has the capability to prevent an inference process and knowledge base from becoming a black box. It is very important that the system is capable of detailing how the performance is calculated since the road network represents a huge investment. The effectiveness of the neural network and machine learning method is verified by comparing diagnostic results by bridge experts.

• The Journal of Fisheries Business Administration
• /
• v.39 no.3
• /
• pp.1-23
• /
• 2008

Recently, traceability systems are introduced as a new food safety information system. To trace food products efficiently, they must have an automatic identification capability at the individual product level. This capability can be gained through RFID technology. But there is not yet any performance evaluation tool on RFID-based traceability systems (RFID-TS). This study developed an evaluation tool of RFID-TS. To develop the tool, this study considered the objective and the components of RFID-TS as their performance constructs. According to Churchill's paradigm, the tool was established through two stages. The final evaluation tool consisted of four constructs (risk, operational benefits, IS (information system), and network) and nine sub-constructs. Among the four constructs, risk and IS were found as the most important performance constructs through regression analysis. Among the nine sub-constructs, service (which belonged to the IS construct) and economic risk (which belonged to the risk construct) were found as the most important performance sub-constructs.