• Asia pacific journal of information systems
• /
• v.16 no.4
• /
• pp.27-47
• /
• 2006

Software companies try to upgrade the level of technology and quality of their products by adopting Software Process Improvement (SPI). First of all, the companies must understand affecting factors based on various environmental view points in order to acquire competitive advantage. In this study, a research model gets started on the basis of literature reviews, and identifies SPI factors that affect the maturity levels of organizations. Organizational members and assessment types are chosen as moderating factors. An empirical research has been made for analyzing the causal relationships among affecting factors and CMM levels. The results of this study will suggest several implications to decision makers who handle SPI issues.

• 한국연소학회:학술대회논문집
• /
• 2013.06a
• /
• pp.117-119
• /
• 2013

Combustion stability margin of a model gas turbine has been assessed by utilizing damping ratios of measured dynamic pressure data. It is known that acoustic oscillations in combustion chambers can be described as a superposition of nonlinearly interacting oscillators. Based on this theoretical background, CSMA (Combustion Stability Margin Assessment) code has been developed. The code has been employed into a model gas turbine combustion experiment, focused on the combustion instability, to show its capability to determine the damping ratio of measured dynamic pressure and further to assess combustion stability margin of the experiment, and turned out that the code works well.

• Journal of Korean Society for Quality Management
• /
• v.47 no.1
• /
• pp.151-162
• /
• 2019

Purpose: This study is in order to secure high quality of military supplies, it is important to secure design quality in the development phase. I will review how to establish a quality assurance system in the development phase based on the author's seminar presentation contents and application example of Hanwha Systems Co., Ltd. Methods: To guarantee design quality in the development phase, in 2002, quality assurance system that is adequate for SQA(Software Quality Assurance)'s requirements of CMM(Capability Maturity Model) was conduct. In 2009, based on the CMMI(Capability Maturity Model Integration) Level 5, there has been continuous and reenforced quality assurance activities. Results: By suggesting the construction and a case study on application of R&D quality assurance, it would be helpful for companies aiming to construct or enhance quality assurance system. Conclusion: To secure high quality for military supplies, a development QA system should be established to secure quality in the development phase. In addition, Total life cycle QA system for development, mass production and operation phase should be reestablished.

• Health Policy and Management
• /
• v.29 no.2
• /
• pp.130-137
• /
• 2019

The fee-for-service system is used as the main payment system for health care providers in Korea. It has been argued that it can't reflect differences in the medical practice costs across regions because the fee schedule is calculated based on the average cost. So, some researchers and providers have disputed that there is need for adopting geographic practice cost index (GPCI) used in the United States for the Medicare program for the elderly to the fee-for-service payment system. This study performed to identify whether the difference in the practice costs among regions exists or not and to examine the feasibility of applying GPCI to Korea payment system. For this purpose, we calculated modified-GPCI and examined considerations to introduce GPCI in Korea. First we identified available data to calculate GPCI. Second, we made applicable GPCI equations to Korea payment system and computed it based on four types of regions (metropolitan, urban, suburban, and rural). We also categorize the regions based on the availability of the medical resources and the capability of utilizing them. As a result, we found that there wasn't any significant difference in the GPCI by regional types in general, but the indices of rural areas (0.91-0.98) was relatively low compared to the indices of other regions (0.96-1.07). Considering the need to use GPCI floor, the pros and cons of using GPCI, and the concern of the regional imbalance of resources, the introduction of GPCI needs to be carefully considered.

• Computers and Concrete
• /
• v.17 no.3
• /
• pp.353-386
• /
• 2016

Realistic assessment of the performance of reinforced concrete structural members like columns is needed for designing new structures or maintenance of the existing structural members. This assessment requires analytical capability of employing proper material models and cyclic rules and considering various load and displacement patterns. A computer application was developed to analyze the non-linear, cyclic flexural performance of reinforced concrete structural members under various types of loading paths including non-sequential variations in axial load and bi-axial cyclic load or displacement. Different monotonic material models as well as hysteresis rules, were implemented in a fiber-based moment-curvature and in turn force-deflection analysis, using proper assumptions on curvature distribution along the member, as in plastic-hinge models. Performance of the program was verified against analytical results by others, and accuracy of the analytical process and the implemented models were evaluated in comparison to the experimental results. The computer application can be used to predict the response of a member with an arbitrary cross section and various type of lateral and longitudinal reinforcement under different combinations of loading patterns in axial and bi-axial directions. On the other hand, the application can be used to examine analytical models and methods using proper experimental data.

• Journal of The Korean Institute of Defense Technology
• /
• v.5 no.2
• /
• pp.23-30
• /
• 2023

TRA(Technology Readiness Assessment) quantitatively assesses the current level of domestic technology and is used as a key tool for determining the possibility of domestic R&D and risk management. However, since the current TRA utilizes hardware-oriented TRL(Technology Readiness Level), it is suitable for independent assessment of each technologies, but has limitations in evaluation from a system integration perspective. In addition, the checklist-based assessment is highly likely to involve subjective evaluation. This study proposes an enhanced TRA framework by redefining TRA procedures and criteria from the systems integration perspective of system engineering. We focused on developing a framework that overcomes the limitations of the current TRL/TRA and enables easier and more intuitive assessment. The proposed framework distinguishes between TE(Technology Element) and CTE(Critical Technology Element) in terms of HW, SW and interface and redefines TRL. TRA is performed according to the TRL redefined from the above three points of view, and the lowest evaluation value is used as system maturity level in consideration of risk management. The proposed CTE selection method minimizes the intervention of the evaluator by utilizing the quantitative goal of the key ROC(Required Operational Capability), development difficulty, and application of COTS(Common Off The Shelf) technology. The effectiveness of this framework was confirmed through a case study of the TSS(Target Surveillance System). It is hoped that starting with this study, research at the framework level will be activated and contribute to the improvement of the TRA system.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.4
• /
• pp.973-983
• /
• 2016

It's been almost 6 years since PIA was implemented based on legislation. So I analyzed problems of PIA from the perspective of ITSM 3 elements. I mainly took account of quality improvement of the report when I assessed systems processing personal informations. So, I propose in terms of logical validity improvement of assessment report. The improvements on 4 different outputs for each phase are many cases that I assessed systems processing personal informations. And I propose improvements on qualified assessors having capability of GRC and on process for managing the assessment system. To settle down PIA system as the reasonable and effective assessment system even after 2016, the statutory deadline for completion of PIA, assessors and appointed assessment firms and authorities should cooperate to complete the assessment system.

• Journal of Computational Design and Engineering
• /
• v.1 no.4
• /
• pp.266-271
• /
• 2014

The survivability of the naval ship is the capability of a warship to avoid or withstand a hostile environment. The survivability of the naval ship assessed by three categories (susceptibility, vulnerability and recoverability). The magnitude of susceptibility of a warship encountering with threat is dependent upon the attributes of detection equipment and weapon system. In this paper, as a part of a naval ship's survivability analysis, an assessment process model for the ship's susceptibility analysis technique is developed. Naval ship's survivability emphasizing the susceptibility is assessed by the probability of detection, and the probability of hit. Considering the radar cross section (RCS), the assessment procedure for the susceptibility is described. It's emphasizing the simplified calculation model based on the probability density function for probability of hit. Assuming the probability of hit given a both single-hit and multiple-hit, the susceptibility is accessed for a RCS and the hit probability for a rectangular target is applied for a given threat.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.6
• /
• pp.306-314
• /
• 2005

In this paper, a new approach that is based on EEAC & only with network solutions for CS&S in the transient stability assessment is developed. The proposed CS&S algorithm in conjunction with EEAC to include the capability of performing on-line TSA without TDS is used to calculate the critical clearing time for stability index. In this algorithm, all generators are represented by classical models and all loads are represented by constant impedance load models. The accelerating & synchronizing power coefficient as an index is determined at its disturbance through solving network equation directly. As mentioned above, a new index for generator is generally used to determine the critical generators group. The generator rotor angle is fixed for non-critical generators group, but has equal angle increments for critical generators group. Finally, the critical clearing time is calculated from the power-angle relationship of equivalent OMIB system. The proposed CS&S algorithm currently being implemented is applied to the KEPCO system. The CS&S result was remarkably similar to TSAT program and SIME. Therefore, it was found to be suitable for a fast & highly efficient CS&S algorithm in TSA. The time of CS&S for the 139 contingencies using proposed CS&S algorithm takes less than 3 seconds on Pentium 4, 3GHz Desktop.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.24 no.68
• /
• pp.85-94
• /
• 2001

Most of customers want to know how to develop the computer system they want to get to use according to the their requirements. This study presents a Computer Integration management System for Quality (CISQ) model for system-integration organizations, which need to demonstrate their capability to consistently provide computer integrated system that meets customer satisfaction and applicable regulatory requirements. The Plan.Do.Check.Act(PDCA) cycle called by Doming wheel expresses the basic concept of continuous improvement action in order to emphasize on achieving business goal. It is useful for providing full competence of a system-integration organization to integrate management systems based on the international management system, and to take an advantage in its market. This study specifies International Certification Network Business Excellence Concept(IBEC) approach to ensure a harmonized integration of the variety of management systems and thereby produce synergy effect. The end part of this study specifies a Assessment Model including an assessment concept adding to the compliance audit according to the CISQ for the continuous improvement. A simple application on Failure Modes and Effects Analysis(FMEA) in testing phase in project life cycle has been done.