• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.06a
• /
• pp.11-29
• /
• 2002

Current design of pile group is based on the estimation of the overall bearing capacity of a pile group from that of a single pile using a group efficiency. However, the behaviors of a pile group are influenced by various factors such as method of pile installation, pile-soil-pile interaction, cap-soil-pile interaction, etc. Thus it is practically impossible to take into account these factors reasonably with the only group efficiency, In this paper, a new method for the design of pile groups is proposed, where the significant factors affecting the behavior of a pile group are considered separately by adopting several efficiencies. Furthermore, in the proposed method, the load transfer characteristics of piles and the difference of pile behaviors with respect to the pile locations in group can be taken into account. The efficiencies for the method are determined using the settlement failure criterion, which is consistent with the concept of allowable settlement for structures. The efficiencies calculated from the results of existing model tests are presented, and the bearing capacity of a pile group in the other model test is calculated and compared with that from the test result, to verify the validity of the proposed method.

• Korean Journal of Microbiology
• /
• v.52 no.2
• /
• pp.226-229
• /
• 2016

The growth of two different fungal species, human pathogenic Cryptococcus neoformans and plant pathogenic Alternaria alternata were inhibited by a chitinase (Chi2) expressed in the autolysing tissue of Coprinellus congregatus. The cell wall thickness was reduced (up to 32%) in C. neoformans compared with that of normal cell, and polysaccharide fibers located outside of the cell wall were also severely removed. The hyphal growth of A. alternata on agar plate was stopped by the enzyme. The allergic inflammation induced by A. alternata was reduced by the enzyme reaction when compared with untreated control in a mouse model.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.1
• /
• pp.35-41
• /
• 2003

Laboratory procedures are available for estimating contaminant migration from sediment into caps by diffusion, but diffusion may not be the major process affecting capping effectiveness. Movement of contaminated pore water from sediment into caps due to sediment consolidation during and after cap placement may be much more significant than contaminant diffusion into caps. To verify this phenomenon, model tests were conducted by utilizing a research centrifuge. In this study, test was modeled for 22.5 hours at 100 g, which modeled a contaminant migration time of 25 years for a prototype that was 100 times larger than the centrifuge model. Centrifuge test results illustrate that advection and dispersion due to consolidation are dominating the migration of contaminants.

• Journal of Korean Society on Water Environment
• /
• v.32 no.2
• /
• pp.216-221
• /
• 2016

The adsorption characteristics of mixed heavy metals (Cr(III), As(VI)) in aqueous solution were investigated using a sediment amendment composite. Sediment amendment composite was composed of clean sediment (40%), zeolite (20%), recycled aggregate (10%), steel slag (10%), oyster shell (10%), and cement (10%). The experimental results showed that the adsorption equilibrium was attained after 180 mins. Heavy metal adsorption was characterized using Freundlich and Langmuir equations. The equilibrium adsorption data for the sediment amendment composite better fitted with the Langmuir model than the Freundlich model. The maximum adsorption capacity of Cr(VI) (36.07 mg/g) was higher than As(III) (25.54 mg/g); and the adsorption efficiency of the Cr(VI) and As(III) ions solution decreased with decreasing pH from 2 to 10. The collective results suggested that the sediment amendment composite is a promising material for a reactive cap that controls the release of Cr(VI) and As(III) from contaminated sediments.

• Current Applied Physics
• /
• v.18 no.11
• /
• pp.1388-1392
• /
• 2018

Metal thin films are used widely to solve the vibration problem. However, damping mechanism is still not clear, which limits the further improvement of the damping properties for film and the development of multi-functional damping coating. In this paper, Damping microscopic mechanism of porous metal films was investigated at both macroscopically and microscopically mixed levels. Molecular dynamics simulation method was used to model and simulate the loading-unloading numerical experiment on the micro-pore and vacancy model to get the stress-strain curve and the microstructure diagram of different defects. And damping factor was calculated by the stress-strain curve. The results show that dislocations and new vacancies appear in the micro-pores when metal film is stretched. The energetic consumption from the motion of dislocation is the main reason for the damping properties of materials. Micro-mechanism of damping properties is discussed with the results of in-situ experiment.

• Current Applied Physics
• /
• v.18 no.11
• /
• pp.1368-1374
• /
• 2018

In this paper, forced vibration was used to regulate the droplet migration, fully recording the transient migration of droplets on a micro-textured substrate under the resonance frequency by a high-speed camera. The influence of resonance frequency and dynamic migration characteristics of droplets on the solid micro-texture surface under lateral vibration were researched. The experiment demonstrates that the driving force is caused by the difference between the left and right contact angles made the droplet oscillate and migrate, and as time t increases, the left and right contact points are periodically shifted and the amplitude of migration increases. Therefore, based on the droplet migration behavior and its force balance mechanism, a spring vibration model of migration behavior of the vibrating droplet micro unit was set up to predict the complete trajectory of its migration on a solid surface. The calculation results show that the theoretical displacement is less than the experimental displacement, and the longer the time, the larger the difference. Affected by the vibration, part of the droplet permeates through the micro-texture, resulting in the droplet losing height and the contact angle becoming smaller as well. While the other part of droplet overcomes the internal surface tension to migrate.

• Structural Engineering and Mechanics
• /
• v.85 no.3
• /
• pp.407-417
• /
• 2023

Precast assembled bridge piers with hybrid connection (PASP) use both tendons and socket connections. To study the seismic performance of PASP, a full-scale in-situ test was performed based on an actual bridge project. The elastic-plastic fiber model of PASP was established using finite element software, and numerical analyses were performed to study the influence of prestress degree and socket depth on the PASP seismic performance. The results show that the typical failure mode of PASP under horizontal load is bending failure dominated by concrete cracking at the joint between the column and cushion cap. The cracking of the pier concrete and opening of joints depend on the prestress degree and socket depth. The prestressing tendons and socket connection can provide enough ductility, strength, restoration capability, and bending strength under small horizontal displacements. Although the bearing capacity and post yield stiffness of the pier can be improved to some extent by increasing the prestressing force, ductility is reduced, and residual deformation is increased. Overall, there are reasonable minimum socket depths to ensure the reliability of the socket connection.

• Environmental and Resource Economics Review
• /
• v.25 no.3
• /
• pp.421-447
• /
• 2016

I examine the situation in which the players compete to obtain economic rents which is generated by the market-based environmental regulation, such as carbon taxes or tradable permit allocations. Drawing on contest theory, I employ the sharing rules which is devised to motivate players best effort, and consider two models in carbon taxes: one model with observable sharing rules and the other model with unobservable sharing rules. I show that, first, the overall welfare of carbon taxes is always less than that of tradable permit allocations under the model with observable sharing rules. Second, depending on the share of the preassigned allocation in tradable permit allocations, the overall welfare of carbon taxes may be larger than that of tradable permit allocations under the model with unobservable sharing rules.

• Journal of Korean Society on Water Environment
• /
• v.24 no.1
• /
• pp.7-18
• /
• 2008

The objective of this study was to develop and apply a water quality simulation model for the evaluation of ungaged watershed. The Modified WASP5 consisted of three sub-models, LOAD-M, DYN-M, and EUT-M. LOAD-M, an empirical model, estimates runoff loadings using point and non-point source data of villages. Daecheong Dam watershed was selected for the research to calibrate, verify and application of Modified-WASP5. LOAD-M model was established using field data collected from all items of water quality and water quantity gaging stations of the watersheds, and was applied to the ungauged watersheds, taking the watershed properties under consideration. The result of water quality simulation using ModifiedWASP5 shows that the observed BOD data of Yongpo and Daechong Dam in 1999 were 0.8 mg/L and 1.0 mg/L, and simulated data were 0.9 mg/L and 0.9 mg/L, respectively. In case of 1999, average BOD concentrations were 0.8 mg/L and 1.0 mg/L. Simulated concentration showed 1.1 mg/L and 1.5 mg/L, respectively. Generally, the simulation results were in good agreement with the observed data. This study was focused on formulating an integrated model for evaluating ungauged watersheds. Even though simulation results varied slightly due to limited availability of data, the model developed in this study would be a useful tool for the assessment and management of ungauged watersheds.

• Journal of Life Science
• /
• v.31 no.1
• /
• pp.83-89
• /
• 2021

Uu-ilys, an i-type lysozyme from spoon worm (Urechis unicinctus), is an innate immune factor that plays an important role in the defense against pathogens. It also possesses non-enzymatic antibacterial activity. Thus, there is a possibility to develop an antimicrobial model peptide from Uu-ilys. In this study, we report the design, production, and antibacterial activity of an Uu-ilys analog that exhibits antibacterial activity. The Uu-ilys structure was fragmented according to its secondary structures to predict the regions with antimicrobial activity using antimicrobial peptide (AMP) prediction tools from different AMP databases. A peptide containing the C-terminal fragment was predicted to exert antimicrobial activity. The chosen fragment was designated as an Uu-ilys analog containing the C-terminal fragment, Uu-ilys-CF. To examine the possibility of developing an AMP using the sequence of Uu-ilys-CF, recombinant fusion protein (TrxA-Uu-ilys-CF) was produced in an expression system that was heterologous. The produced fusion protein was cleaved after methionine leaving Uu-ilys-CF free from the fusion protein. This was then isolated through high performance liquid chromatography and reverse phase column, CapCell-Pak C18. The antibacterial activity of Uu-ilys-CF against different microbial strains (four gram-positive, six gram-negative, and one fungal strain) were assessed through the ultrasensitive radial diffusion assay (URDA). Among the bacterial strains tested, Salmonella enterica was the most susceptible. While the fungal strain tested was not susceptible to Uu-ilys-CF, broad spectrum antibacterial activity was observed.