• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.642-645
• /
• 2007

Mounted in aircraft, LiDAR (Light Detection And Ranging) technology uses pulses of light to collect data about the terrain below. The main objective of this study was to extract reliable the individual tree and analysis techniques to facilitate the used LiDAR data for estimating tree crown diameter by measuring individual trees identifiable on the three dimensional LiDAR surface. In addition, this study can be quantitative analysis of individual tree through the canopy parameter.

• Korean Journal of Remote Sensing
• /
• v.25 no.3
• /
• pp.255-261
• /
• 2009

A new polarimetric SAR image classification technique based on the degree of polarization (DoP) and the co-polarized phase-difference (CPD) is presented in this paper. Since the DoP and the CPD of a scattered wave provide information on the randomness of the scattering and the type of scattering mechanisms, at first, the statistics of the DoP and CPD are examined with measured polarimetric SAR image data. Then, a DoP-CPD diagram with appropriate boundaries between six different classes is developed based on the SAR image. The classification technique is verified using the JPL AirSAR and ALOS PALSAR polarimetric data. The technique may have capability to classify an SAR image into six major classes; a bare surface, a village, a crown-layer short vegetation canopy, a trunk-layer short vegetation canopy, a crown-layer forest, and a trunk-dominated forest.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.512-514
• /
• 2005

Accurate DEM surface of forest floor is very important to extract any meaningful information regarding forest stand structure, such as tree heights, stand density, crown morphology, and biomass. In airborne lidar data processing, DEM data of forest floor is mostly generated by interpolating those elevation points obtained from last laser returns. In this study, we try to analyze the property of the last laser return under relatively dense forest canopy. Airborne laser data were obtained over the study area in relatively dense pine plantation forest. Two DEM data were generated by using all the points in the last laser returns and using only those points after removing non-ground points. From the preliminary analysis on these DEM data, we found that more than half of points among the last laser returns are actually hit from canopy, branches, and understory vegetation that should be removed before generating the surface DEM data.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.29-32
• /
• 2008

In this paper, we propose one unsupervised classification technique using the degree of polarization (DoP) and the co-polarized phase-difference (CPD) statistics, instead of the entropy and alpha. It is shown that the DoP is closely related to the entropy, and the CPD to the alpha. The DoP explains the feature how much the effect of multiple reflections is contained. Hence, the DoP could be used as an important factor for classifying classes. The CPD can also be computed from the measured Mueller matrix elements. For the smooth surface scattering, the CPD is about $0^{\circ}$, and for dihedral-type scattering, the CPD is about $180^{\circ}$. A DoP-CPD diagram with appropriate boundaries between six different classes is developed based on the SAR image. The classification results are compared with the existing Entropy-alpha diagram as well as the IPL-AirSAR polarimetric data. The technique may have capability to classify an SAR image into six major classes; a bare surface, a village, a crown-layer short vegetation canopy, a trunk-layer short vegetation canopy, a crown-layer forest, and a trunk-dominated forest. Based on the DoP and CPD analysis, a simple three-component decomposition technique was also proposed.

• Journal of Korean Society of Forest Science
• /
• v.96 no.2
• /
• pp.227-234
• /
• 2007

The forest canopy gap has been well known as a substantial process of forest cyclic regeneration and important role in stand structure, dynamics, and biodiversity of the forest ecosystem. Based on 3,600 $5m{\times}5m$ square grids in a 9ha permanent experimental plot, the study was conducted to evaluate the regeneration pattern of woody species by developmental stage {seedlings (<1 m of height), saplingI (>1 m of height, <2 cm of DBH), and saplingII (2 cm$<200m^2$), $201-400m^2$, $400-600m^2$, $601-800m^2$, and $>800m^2$) in the mixed broadleaved-Korean pine forest. The results indicated that the regenerating trees of Populus ussuriensis occurred only in the canopy gap area, considered to be a typical gap-dependent species. The regeneration of Ulmus japonica, Ulmus laciniata, and Maackia amurensis could be generally satisfied with the gap size of $201-600m^2$, Betula costata and Prunus padus with gap size of $401-800m^2$, Picea koraiensis with gap size of $201-800m^2$, Fraxinus mandshurica and Syringa reticulata var. mandshurica with smaller than $800m^2$, respectively. Acer ukurunduense and Acer tegmentosum were likely to have no problem with the gap size to make gap regeneration. Acer mono and Tilia amurensis looked more capable of regenerating in the closed canopy disregarding the upper crown condition. The regeneration of Pinus koraiensis and Abies nephrolepis had no trouble under the canopy condition in less than $800m^2$of gap size. The density of regenerating shrubs was rather high, especially under the closed canopy, considered to be associated with great amount of regeneration production in such shade tolerant species as Lonicera maackii, Corylus mandshurica, Euonymus pauciflorus, and Philadelphus schrenkii under the closed canopy. Pearson correlation coefficient was computed to compare the similarity among non-gap area and five gap size classes by developmental stages for trees and shrubs. The similarity coefficients among closed canopy and the gap size classes were mostly significantly correlated to each other with a few exceptions.

• Journal of Korean Society of Forest Science
• /
• v.99 no.3
• /
• pp.391-396
• /
• 2010

To analyze the characteristics of canopy fuel in Pinus densiflora stand, which is essential to assess the crown fire hazard, allometric equations for estimation of crown fuel biomass were developed by subjectively categorized crown fuel component and crown bulk density was analyzed by available fuel component categories. Ten trees were destructively sampled at Pinus densiflora stand in Mt. Palgong in Daegu and their crown fuels were weighed separately for each fuel category by size classes and by living and dead. Regression equations that estimate crown fuel load by diameter at breast height(D) or additional total height(H) were derived. The adjusted coefficient of determination values were the highest (${R^2}_{adj}$=0.835-0.996) and standard error of estimate were the lowest (SEE=0.074-0.638) in the allometric equation lnWt=${\alpha}+{\beta}lnD+{\gamma}lnH$ in average. However, in needles and small branches categories, the differences in ${R^2}_{adj}$ and SEE between equations were not significant. Crown bulk density (CBD), which was calculated by crown fuel load divided by crown volume, was 0.067 kg/$m^3$ in average when only needles were considered as available crown fuel and 0.097 kg/$m^3$ when needles and branches (0-0.5 cm diameter) were considered. The increments of CBD of needles and small branches were little even when diameter at breast height increased.

• Journal of Forest and Environmental Science
• /
• v.32 no.1
• /
• pp.74-81
• /
• 2016

Classified into sub-tree of the growth-form, Acer pseudosieboldianum and Carpinus cordata hardly reach the uppermost canopy with limited height growth potentiality in the natural deciduous forest. However, the two species usually dominate lower stories of the forest, playing an important role in overall ecological characteristics in the forest. Based on the vegetation data of 106 $20m{\times}20m$ sample plots in Mt. Jumbong area, this study was carried out to evaluate ecological constitution by several quantitative analysis so as to understand the mechanism of the natural deciduous forest. The results indicated that individuals of A. pseudosieboldianum and C. cordata were absent or few in overstory, but emerged the most dominant species in midstory and understory, providing adequate proof of the ecological importance. The comparison of indices of succession between presented and predicted values in midstory did not make much difference, suggesting that the species composition would not change much and come close to steady state in midstory and understory. The pair combination of species association noted that A. pseudosieboldianum had significant positive association with C. cordata, Quercus mongolica, and Tilia amurensis had significant positive association with A. pseudosieboldianum, A. pictum subsp. mono and Fraxinus mandshurica but negative association with F. rhynchophylla. Being compared with other major canopy tree species in the study forest, the target species of A. pseudosieboldianum and C. cordata had strong regeneration strategies, partially characterized by large number of saplings and pole sized trees and high ratio of live crown, which indicated high shade tolerance to survive in the limited amount of light under the canopy. Even though A. pseudosieboldianum and C. cordata do not reach and occupy the canopy layer mainly due to the inherent growth form, they would have highest competitive potentiality to prosper and dominate in the midstory of the natural deciduous forest.

• Journal of Korean Society of Forest Science
• /
• v.94 no.5 s.162
• /
• pp.313-320
• /
• 2005

This study was performed in a 38-year-old Mongolian pine (Pinus sylvestris L. var. mongolica Litvin) plantation in northeast China. Data were collected from 5 sample trees with different canopy position ranging in DBH from 14.6 cm to 23.8 cm. Sawn speciments that included the biggest knot were taken from the stem below the living crown. Number and distribution of knots per whorl below the living crown were studied by relative height below living crown (RHBC). A linear model expressed as function of whorl age (AGE), whorl height ($H_k$) and the stem diameter at which the whorl was located ($D_k$) was developed to predict the knot diameter and angle. The number of annual rings in four periods and the width of respective zone alone stem were used as dependant variables to analyze the knot develop phases. In average, the number of years from branch birth to ceased forming rings was 7.8, the branches remained alive for 4.2 years without forming annual rings, and branches were occluded 14.4 years after their death. These results can provide abundance branch and knot information so as to describe current and past tree growth dynamic of Mongolian pine plantation.

• Journal of Korean Society of Forest Science
• /
• v.85 no.4
• /
• pp.557-564
• /
• 1996

Based on stem analysis as well as branch analysis data of each tree from 8 plots of circle clear-cutting and 1 biomass plot in Changbai Mountain area, located in Northeast of China, the effective crown form of Changbai larch(Larix olgensis H.) plantation were studied by using the approach of crown curve. The results indicated that the cross-section forms of effective crown were stable and showed approximate circle for different tree size. Because the effective crown was on upper position of the canopy and its form reflects crown architecture under non-competition condition, the architecture is mainly affected by species hereditary feature. Therefore, for the specified species the effective crown form was thought to be relatively stable. The effective crown form of tree was neither related to the tree size within stand nor to the stand condition for different stand. The total effective crown curve of larch plantation could be characterized by using mean effective crown taper.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.4
• /
• pp.325-334
• /
• 2006

Understanding the airflow characteristics within the canopy structure installed between closely adjacent tunnels either for light adaptation or for protection from snow hazards is required for the normal ventilation as well as safety system design. Grade, horizontal alignment, cross-sectional area and shape are known to substantially influence the fire smoke behavior and their influences raise great concern for the safety design. This paper aims at studying the effects of tunnel geometrical characteristics and canopy installation on the ventilation and fire propagation through CFD analysis. In the case of 145m long canopy, 50% opening ratio is preferred with respect to the airflow pattern and ventilation efficiency. When a 20MW fire occurs in a 1.8km-long tunnel and four 1250mm reversible jet fans are instantly turned on, smoke concentration at 40m downstream of the fire decrease 13% for the upgrade tunnel with 2% gradient and increases 20% for -2% gradient, compared to the standard horizontal tunnel. Backlayering is observed within 45m-long segment toward the entrance in 2% down-graded tunnel. In a rectangular tunnel, there is no significant difference of smoke concentration as well as velocity profile from the standard crown tunnel. Three-laned tunnel shows lower level of both profiles and backlayering is detected up to 50m upstream of the fire, while the risky situation rapidly disappears thereafter.