• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.3
• /
• pp.425-436
• /
• 2015

This paper presents the procedures used for estimating the stability and control derivatives of a general aviation canard aircraft from flight data. The maximum likelihood estimation method which accounts for both process and measurement noise was used for the flight data analysis of a four seat canard aircraft, the Firefly. Without relying on the parameter estimation method, several aerodynamic derivatives were obtained by analyzing the steady state flight data. A wind tunnel test, a flight test of a 1/4 scaled remotely controlled model aircraft, and the prediction of aerodynamic coefficients using the USAF Stability and Control Digital Data Compendium (DATCOM), Advanced Aircraft Analysis (AAA), and Computer Fluid Dynamics (CFD) were performed during the development phase of the Firefly and the results were compared with flight determined derivatives of a full scaled flight prototype. A correlation between the results from each method could be used for the design of the canard aircraft as well as for building the aerodynamic database.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.2
• /
• pp.165-170
• /
• 2007

During the conceptual design phase of a wing-body-canard type fighter class aircraft, as a method of maneuverability enhancement for an aircraft, effects of canard-leading edge flap scheduling have been studied. In this study, corrected supersonic panel method has been used to predict the drag polar characteristics due to canard-leading edge flap deflections in the high speed regime. Utilizing the predicted drag polar curves, the canard-leading edge flap scheduling laws have been established. These scheduling laws are the relation of canard-leading edge flap deflections and the flight conditions to maximize the lift-drag ratio. Based on the results obtained from the canard-leading edge flap scheduling, the present method has shown to be useful to enhance the maneuverability of wing-body-canard type fighter class aircraft.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.2
• /
• pp.105-114
• /
• 2008

In this study, the sizing and performance analysis program is developed for the canard rotor wing(CRW) aircraft which operates in dual modes (fixed wing mode and rotary wing mode). The developed program is verified for both fixed wing and rotary wing modes using the existing aircraft data and the design optimization formulation is made to perform the reconnaissance mission. For the canard rotor wing aircraft optimization , multi-objective function is constructed to consider both the fixed wing mode and rotary wing mode the weighting factor. For six design cases with different weighting factors and different design constraints, the optimization is performed and improved rotor design results are derived.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.7
• /
• pp.575-580
• /
• 2007

During the conceptual design phase of a canard type high maneuverable aircraft, the low speed small scale wind tunnel test was conducted to investigate the high angle-of-attack static stability of the aircraft. In this study, 1/50th scale generic canard-body-wing model was used for the small scale wind tunnel test. For the analysis of static stability including high angle-of-attack nonlinear characteristics, the vertical tail effects were studied due to canard deflections. In addition, the nose chine effects were studied at high angle-of-attack. Based on the results obtained from the experimental study, the configuration change effects for canard type aircraft on high angle-of-attack static stability have been able to analyze.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.13 no.3
• /
• pp.97-109
• /
• 2005

A canard type aircraft, which has good wing stall and stall/spin-proof characteristics, is under development. The aircraft prototype has full-depth core sandwich type wing and fixed landing gear, and has been built for test flights. Newly developing aircraft will be equipped with retractable landing gear and conventional foam core sandwich laminate structures and multi-rib wings. In this study, we present the structural test procedure and result for aircraft Firefly.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.7
• /
• pp.655-660
• /
• 2007

A canard-leading edge flap deflection scheduling laws have been established to enhance the maneuverability of the canard type fighter class aircraft. These scheduling laws are the relation of canard-leading edge flap deflections and flight conditions to maximize the lift-drag ratio. For these purposes, the corrected supersonic panel method has been used to predict the lift-drag characteristics due to canard-leading edge flap deflections. In addition, the high speed wind tunnel test has been conducted with 1/20 scale model to validate the predicted scheduling laws. Good agreements have been obtained compared with the results of high speed wind tunnel test. Based on the results obtained from the experimental and numerical studies, the corrected supersonic panel method has shown to be useful to establish the canard-leading edge flap deflection scheduling law for the aerodynamic design of canard type fighter class aircraft.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.6
• /
• pp.31-38
• /
• 2002

This paper presents the analysis of the flight test data measured by the sensors installed on a four-seat canard aircraft. The inherent stall proof characteristics of canard aircraft was verified from the stall test. The dihedral effect, adverse yaw and roll control power were examined and the neutral point that determines the longitudinal stability of the aircraft was investigated. The dynamic characteristics such as dutch roll mode were also examined. Without relying on the parameter identification method, the aerodynamic derivatives or the relations between the aerodynamic derivatives were obtained by analyzing the steady state flight data.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.2
• /
• pp.22-31
• /
• 2005

A design study was conducted for a new concept aircraft(Canard Rotor/Wing: CRW) that has the capability of dual mode flight, a rotorcraft and a fixed wing mode. The CRW can show a vertical take off/landing and a high speed/efficiency cruise performance simultaneously. It is not surprising to develop a new sizing code for this class of aircraft because conventional sizing codes developed solely for either the rotary wing or the fixed wing aircraft are not adequate to design a dual mode aircraft operated both by the rotary wing through tip jet effux and the fixed wing lift. Thus, a new design code was developed based on the conventional sizing code by adding some features including rotor performance, duct flow, and engine flow analysis, hence could eventually predict the performance of reaction driven rotor, the flight performance and the flight characteristics. The various design parameters were investigated to find their influences on the flight performance then, a small UAV(Unmanned Aircraft Vehicle) of 1500 lbs class was optimally designed to have minimum weight using the developed sizing code.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.680-683
• /
• 2005

The wing component model for flutter analysis consisting of stiffness, mass, and aerodynamic model has been constructed based on the full airframe finite element model for 4-seat canard-type small aircraft. A study on wing flutter characteristics has been investigated based on the wing component model constructed using PK method in MSC/NASTRAN for flutter analysis. In addition, wing flutter mechanism for the aircraft under consideration has been analyzed based on the results of normal mode and flutter analysis.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.1
• /
• pp.39-48
• /
• 2011

This study describes a range sensitivity of a canard controlled missile. An investigation was conducted into the relative importance of aerodynamic parameters on a guided missile. Also this study was analyzed by quantifying their effects on the missile range. To analyze the range sensitivity of a guided missile, a trajectory analysis program of a guided missile was developed. The range sensitivity analysis was conducted on a thrust, weight, drag and lift. The result of the range sensitivity analysis shows that the design parameters with the greatest effect on the missile range are thrust, drag, weight, and lift, in descending order of importance. The thrust on range extension is quite obvious to extend a range of a guided missile. In particular, the drag exhibited greater range sensitivity than lift at a guided flight. The result also shows that missile range could be maximized by applying the appropriate launch angle and canard pitch-up control.