• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.1065-1068
• /
• 2003

For the first time, high quality ultra-thin strained Si/SiGe on Insulator (SGOI) substrate with total SGOI thickness( $T_{Si}$ + $T_{SiGe}$) of 13 nm is developed to combine the device benefits of strained silicon and SOI. In the case of 6- 10 nm-thick top silicon, 100-110 % $I_{d,sat}$ and electron mobility increase are shown in long channel nFET devices. However, 20-30% reduction of $I_{d,sat}$ and electron mobility are observed with 3 nm top silicon for the same long channel device. These results clearly show that the FETs operates with higher performance due to the strain enhancement from the insertion of SiGe layer between the top silicon layer and the buried oxide(BOX) layer. The performance degradation of the extremely thin( 3 nm ) top Si device can be attributed to the scattering of the majority carriers at the interfaces.

• 한국음향학회지
• /
• 제19권1호
• /
• pp.84-88
• /
• 2000

본 논문에서는 저전압에서 동작하는 CMOS 아날로그 4상한 멀티플라이어를 설계하였다. 제안된 멀티플라이어는 2개의 완전 차동 트랜스컨덕터로 구성되고 공급 전압을 VT+2VDS,sat+VDS,triode로 낮게 유지할 수 있다. 설계된 아날로그 4상한 멀티플라이어는 1.2V 공급전압에서 0.25㎛ CMOS n-well 공정 파라미터를 이용하여 HSPICE 시뮬레이션 하였다. 시뮬레이션 결과 0.7VP-P 최대 입력에서 THD는 1.28%이다.

• 항공우주시스템공학회지
• /
• 제8권1호
• /
• pp.36-41
• /
• 2014

KAFASAT is a CubeSat which has a high level mission of testing the possibility of establishing the LEO satellite constellation providing the role of communication nodes and quasi-realtime image recognition of battlefield in accordance with the aspect of future-war-environment. The high level mission is developed using the Pugh selection method, which is one of system engineering tools. In order to accomplish the high level mission objectives and deduce engineering level requirements, system engineering tools such as Analytic Hierarchy Process and Quality Function Deployment are used. The subsystem synthesis in the context of system engineering process is done using a developed integrated design environment. The paper also includes the conceptual design results of the KAFASAT, which can be used as a baseline for upcoming preliminary design.

• 한국산학기술학회논문지
• /
• 제20권6호
• /
• pp.26-37
• /
• 2019

ESS는 각 제품의 품질 및 안전성이 보장되더라도 현장에서 조립하는 사람 혹은 환경에 따라 완성 품질이 달라지므로, 설치공정의 표준화 및 현장에 설치된 ESS에 대한 안전성 시험평가기술의 개발이 요구되고 있다. 또한, 선진국에서는 ESS의 성능을 보다 정확하고 신뢰성 있게 검증하기 위하여, H/W에 의한 성능 시험뿐만 아니라 S/W에 의한 성능검증도 요구하고 있는 실정이다. 따라서 본 논문에서는 현장에 설치되어 있는 ESS의 성능을 평가하기 위하여 SAT(Site Acceptance Test)용 평가알고리즘을 제안하였다. 또한, 전력계통 상용해석 프로그램인 PSCAD/EMTDC를 이용하여 ESS의 SAT용 시험장치를 모델링 하고, 이를 바탕으로 30[kW]급 시험장치를 구현하였다. 상기에서 제안한 평가알고리즘을 이용하여 다양한 시뮬레이션과 특성시험을 비교한 결과, 용량 및 Round-trip 효율, Duty-cycle 추종특성, LVRT 특성, Anti-islanding특성에 대한 ESS의 성능을 정확하게 평가할 수 있었고, 모델링에 의한 특성과 시험장치에 의한 특성이 거의 동일하게 나타나, 본 논문에서 제안한 평가알고리즘의 유용성을 확인하였다.

• 천문학회보
• /
• 제39권2호
• /
• pp.110.1-110.1
• /
• 2014

The optics of Space telescope is one of the major parts of space mission used for imaging observation of astronomical targets and the Earth. These kinds of space mission have a bulky and complex opto-mechanics with a long optical tube, but there are attempts have been made to observe a target with a small satellite in many ways. In this paper, we describe an optical design of a reflecting telescope for use in a CubeSat mission. For this design, we adopt the off-axis segmented method of astronomical observation techniques based on the Ritchey-Chr$\acute{e}$tien type telescope. The primary mirror shape is a rectangle with dimensions of $8cm{\times}8cm$, and a secondary mirror has dimensions of $2.4cm{\times}4.1cm$. The focal ratio is 3 which can obtain a $0.3{\times}0.2$ degree diagonal angle in a $1280{\times}800$ CMOS color image sensor with a pixel size of $3{\mu}m{\times}3{\mu}m$. This optical design can capture a ${\sim}4km{\times}{\sim}2.3km$ area of the earth's surface at 700 km altitude operation. Based on this conceptual design, we will keep trying to study more for astronomical observation with Attitude control system.

• Journal of the Optical Society of Korea
• /
• 제17권6호
• /
• pp.533-537
• /
• 2013

Space telescope optics is one of the major parts of any space mission used to observe astronomical targets or the Earth. This kind of space mission typically involves bulky and complex opto-mechanics with a long optical tube, but attempts have been made to observe a target with a small satellite. In this paper, we describe the optical design of a reflecting telescope for use in a CubeSat mission. For this design we adopt the off-axis segmented method for astronomical observation techniques based on a Ritchey-Chr$\acute{e}$tien type telescope. The primary mirror shape is a rectangle with dimensions of $8cm{\times}8cm$, and the secondary mirror has dimensions of $2.4cm{\times}4.1cm$. The focal ratio is 3 which can yield a 0.383 degree diagonal angle in a $1280{\times}800$ CMOS color image sensor with a pixel size of $3{\mu}m{\times}3{\mu}m$. This optical design can capture a ${\sim}4km{\times}{\sim}2.3km$ area of the earth's surface at 700 km altitude operation.

• Journal of Magnetics
• /
• 제8권4호
• /
• pp.138-141
• /
• 2003

$Ni_{0.65}Zn_{0.35}Fe_2O_4$thin films were prepared by using a sol-gel method. Their crystallographic, dielectric and magnetic properties were investigated as a function of Cu contents by means of an X-ray diffractometer (XRD), X-ray reflectivity, LCZ meter (NF2232), a vibrating sample magnetometer (VSM), and an atomic force microscope (AFM). From typical C-V measurements for $Ni_{0.65}Zn_{0.35}Fe_2O_4$ thin films on p-type silicon substrate, the surface charge density was calculated as 1.4 ${\mu}$C/$m^2$. The dielectric constant evaluated from the capacitance at the accumulation state was 28. The high $H_{c}$ and low $M_{sat}$ at x=0.0 and 0.1 were due to the growth of the ${\alpha}$-$Fe_2O_3$ phase having antiferromagnetic properties. The rapidly decreased $H_{c}$ and increased $M_{sat}$ at x=0.2 and 0.3 can be explained that the ${\alpha}$-$Fe_2O_3$ phases have completely disappeared at x=0.3 and so, non-magnetic defects are minimized. The $M_{sat}$ was slightly decreased and the $H_{c}$ was increased above at x=0.3 because the increase of grain boundary due to smaller grain size acts as defects during magnetization process.

• Journal of Animal Science and Technology
• /
• 제57권3호
• /
• pp.8.1-8.8
• /
• 2015

Background: The demand for healthy, lean and consistent meat products containing low saturated fatty acid content and high quality polyunsaturated fatty acids (PUFA), especially long-chain (${\geq}C_{20}$) omega-3 PUFA, has increased in recent times. Fat deposition is altered by both the genetic background and dietary supplements, and this study aimed to assess the effect of dietary Spirulina supplementation levels on the mRNA expression patterns of genes controlling lipid metabolism in the subcutaneous adipose tissue (SAT) and Longissimus dorsi (ld) muscle of Australian crossbred sheep. Methods: Twenty-four weaned lambs belonging to four breeds under the same management conditions were maintained on ryegrass pasture and fed three levels of Spirulina supplement (control, low and high). In terms of nutrient composition, Spirulina is a nutrient-rich supplement that contains all essential amino acids, vitamins and minerals. It also is a rich source of carotenoids and fatty acids, especially gamma-linolenic acid (GLA) that infer health benefits. After slaughter, subcutaneous adipose tissue (SAT) and ld samples were subjected to mRNA extraction and reverse transcription using quantitative polymerase chain reaction (RT-qPCR) to assess the mRNA expression levels of the Aralkylamine N-acetyltransferase (AANAT), Adrenergic beta-3 receptor (ADRB3), B-cell translocation gene 2 (BTG2) and Fatty acid synthase (FASN) genes, which are associated with lipid metabolism. Results: Both low and high Spirulina supplementation levels strongly up-regulated the transcription of all the selected genes in both SAT and ld tissues (mostly in the subcutaneous adipose), but sheep breed and sex did not influence the gene expression patterns in these tissues. Conclusions: The evidence indicates that high Spirulina supplementation level resulted in a decrease in intramuscular fat content in Australian purebred and crossbred sheep due to the enhanced production of melatonin in sheep muscle tissues and strong up-regulation of mRNA expression of BTG2 in SAT which negatively affected fat deposition. In contrast, low Spirulina supplementation level strongly up-regulated the ADRB3 and FASN genes responsible for fat production. These findings are consistent with the observed phenotypic data suggesting that low Spirulina supplementation level can increase lamb production, with higher long-chain PUFA content.

• 한국지구과학회지
• /
• 제18권6호
• /
• pp.515-521
• /
• 1997

난지도 매립장 매립물의 특성을 조사하기 위해서 중력, 자력, LandSat TM 열적외선 밴드 자료, 매립장의 표면에서 측정한 침하량 자료 등을 다변량 통계분석기법을 응용하여 분석하였다. 분석에 이용한 자료들은 각기 상이한 깊이에 관한 정보를 제공하기 때문에 측정된 총 자력자료와 중력자료는 자극화변환된 자력이상과 매립장의 3차원 밀도분포로 각기 전환하였으며, 본 연구에서는 이 중 매립장의 상부층에 관한 정보를 이용하였다. 통계분석은 침하량 측정 지점들을 대상으로 수행하였으며, 이들 지점에서의 자극화변환 자력이상, 매립물의 밀도, LandSat TM 열적외선 밴드 값들은 내삽방법을 이용하여 구하였다. 자료분석에 사용한 다변량 통계분석 기법은 개체간의 기하학적인 거리를 이용하여 군집화하는 집락분석으로, 개체간의 거리 계산시 각 자료간의 상이한 측정단위가 주는 효과를 제거하기 위해서 사전에 표준화를 실시하였다. 군집화는 체계적 군집화 방법을 이용하여 수행하였다. 물리적 특성을 바탕으로 분류된 최적의 군집수는 수상도에서 나타난 결과에 따르면 총 6개의 군집으로 나타났다. 본 연구의 결과는 통합된 지구물리자료에 다변량 통계분석 기법을 적용함으로써 복합적 인 쓰레기 매립장의 특성 규명이 가능함을 시사한다.

• 대한건축학회논문집:구조계
• /
• 제35권11호
• /
• pp.181-188
• /
• 2019

The purpose of this study is to evaluate the cooling energy saving effects of CRAH supply air temperature(SAT) and design flow rate changes when applying air-side economizer in the data center. MLC(Mechanical Load Component), which is cooling performance indicator of data center, was used to assess the effectiveness of cooling energy savings. It was computed with energy simulation (DesignBuilder) to evaluate the cooling energy performance of 8 different alternatives in a data center. The MLC was 0.31~0.32 regardless of CRAH supply temperature without air-side economizer, and 0.15 to 0.19 value with air-side economizer. That is, cooling energy can be reduced by approximately 40~55% when applying economizer. As the CRAH SAT and design flow rate changed, the MLC values were 0.16 to 0.18 and 0.15 to 0.19, respectively.