• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2009년도 춘계학술발표회 논문집
• /
• pp.91-94
• /
• 2009

항공사진촬영은 계획된 노선을 따라 항공기를 조정하여 적절한 위치에서 촬영을 수행하는 작업이다. 특히 3차원 공간데이터 구축을 위하여 사용되는 다각사진촬영시스템의 경우 대형 CCD가 중형 CCD를 사용함으로써 촬영면적이 크지 않아서 적절한 위치에서 촬영이 이루어 지지 않는 경우 충분한 중복도를 확보하지 못하여 외부표정요소 결정에 문제가 발생할 소지가 있다. 따라서, GPS/INS를 이용하여 정확한 항공기의 위치를 결정하여 사전에 계획된 위치에서 촬영을 실시함으로써, 정확한 3차원 공간데이터의 모델링을 수행할 수 있다.

• 한국소음진동공학회논문집
• /
• 제18권12호
• /
• pp.1229-1236
• /
• 2008

A set of modal parameters of a stay-cable have been extracted fi:on a moving picture captured by a digital camera supported by shaking hands. It is hard to identify the center of targets attached on the cable surface from the blurred cable motion image, because of the high speed motion of cable, low sampling frequency of camera, and the shaking effect of camera. This study proposes a multi-template matching algorithm to resolve such difficulties. In addition, a sensitivity-based system identification algorithm is introduced to extract the natural frequencies and damping ratios from the ambient cable vibration data. Three sets of vibration tests are conducted to examine the validity of the proposed algorithms. The results show that the proposed technique is pretty feasible for extracting modal parameters from the severely shaking motion pictures.

• 한국생산제조학회지
• /
• 제26권1호
• /
• pp.50-58
• /
• 2017

This paper proposes a real-time robotic vision control scheme using the weighting matrix to efficiently process the vision data obtained during robotic movement to a target. This scheme is based on the vision system model that can actively control the camera parameter and robotic position change over previous studies. The vision control algorithm involves parameter estimation, joint angle estimation, and weighting matrix models. To demonstrate the effectiveness of the proposed control scheme, this study is divided into two parts: not applying the weighting matrix and applying the weighting matrix to the vision data obtained while the camera is moving towards the target. Finally, the position accuracy of the two cases is compared by performing the slender bar placement task experimentally.

• 제어로봇시스템학회논문지
• /
• 제13권5호
• /
• pp.467-473
• /
• 2007

In this paper, we present a position-based robot hand tracking scheme where a pan-tilt camera is controlled such that a robot hand is always shown in the center of an image frame. We calculate the rotation angles of a pan-tilt camera by transforming the coordinate systems. In order to identify the model parameters, we applied two optimization techniques: a nonlinear least square optimizer and a particle swarm optimizer. From the simulation results, it is shown that the considered parameter identification problem is characterized by a highly multimodal landscape; thus, a global optimization technique such as a particle swarm optimization could be a promising tool to identify the model parameters of a robot hand tracking system, whereas the nonlinear least square optimizer often failed to find an optimal solution even when the initial candidate solutions were selected close to the true optimum.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.36-39
• /
• 1997

In this paper, we described an approach to design of precision optical system for visual inspection of solder joint defects of SMC(surface mount components) on PCBs(Printed Circuit Board). The illumination system, consisting of three tiered LED lamps and one main camera and four side view camera, is implemented to generated iso-contour on the solder joint according to gradient of the soldered surface. We analyze LED design parameter such as incident angle, diameter of LED ring, and so on to acquire uniform illumination.

• 한국측량학회지
• /
• 제33권6호
• /
• pp.475-483
• /
• 2015

This study examined the feasibility of using an automatic lens distortion correction (ALDC) camera as the payload for a photogrammetric unmanned aerial vehicle (UAV) system. First, lens distortion for the interior orientation (IO) parameters was estimated. Although previous studies have largely ignored decentering distortion, this study revealed that more than 50% of the distortion of the ALDC camera was caused by decentering distortion. Second, we compared the accuracy of bundle adjustment for camera calibration using three image types: raw imagery without the ALDC option; imagery corrected using lens profiles; and imagery with the ALDC option. The results of image triangulation, the digital terrain model (DTM), and the orthoimage using the IO parameters for the ALDC camera were similar to or slightly better than the results using self-calibration. These results confirm that the ALDC camera can be used in a photogrammetric UAV system using only self-calibration.

• Nuclear Engineering and Technology
• /
• 제55권7호
• /
• pp.2567-2571
• /
• 2023

Scintillator materials are widely used in the medical and industrial fields for imaging systems using gamma cameras. In this study, image evaluation is performed by modeling a gamma camera system based on a lutetium-yttrium oxyorthosilicate (LYSO) scintillation detector using a pinhole collimator that can improve the spatial resolution. A LYSO detector-based gamma camera system is modeled using a Monte Carlo simulation tool. The geometric concept of the pinhole collimator is designed using various magnification factors, and the spatial resolution is measured using the acquired source image. To evaluate the resolution, the full width at half maximum (FWHM) and natural image quality assessment (NIQE), a no-reference-based parameter, are used. We confirm that the FWHM and NIQE values decrease simultaneously when the diameter of the pinhole collimator increases. Additionally, we confirm that the spatial resolution improves as the magnification factor increases under the same pinhole diameter condition. Particularly, a 0.57 mm FWHM value is obtained using the modeled gamma camera system with a LYSO scintillation detector. In conclusion, our results demonstrate that a pinhole collimator with a LYSO scintillation detector is a promising gamma camera imaging system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.605-606
• /
• 2005

Depth error correction effect for maladjusted stereo cameras with calibrated pixel distance parameter is presented. Intra and extra parameters should be obtain to determine the relation between image and world coordination through experiment. One difficulty is in camera alignment for parallel installation: placing two CCD arrays in a plane. If the pixel distance parameter which is one of intra parameter is calibrated with known points, such error can be compensated in some amount. Such error compensation effect with the calibrated pixel distance parameter is demonstrated with various experimental results.

• 대한전자공학회논문지SP
• /
• 제39권3호
• /
• pp.23-35
• /
• 2002

시선 위치 추적이란 모니터상에 사용자가 쳐다보고 있는 지점을 파악해 내는 기술이다 이 논문에서는 컴퓨터 비젼 방법을 이용하여 사용자가 모니터 상에 어느 지점을 쳐다보고 있는지를 파악(시선 위치 추적)하는 새로운 방법을 제안한다. 시선위치를 파악하기 위해 본 논문에서는 얼굴 영역 및 얼굴 특징점(양 눈, 양 콧구멍, 입술 끝점 등)을 2차원 카메라 영상으로부터 추출하였으며, 이들의 움직임으로부터 카메라 보정 및 매개변수 추정 방법등을 이용하여 초기 3차원 위치를 추정해 내었다. 이후 모니터 상의 한 지점을 쳐다보기 위해 사용자가 얼굴을 움직이는 경우 이러한 얼굴의 3차원 움직임 량 역시 자동으로 추정하였다. 이로부터 변화된 얼굴 특징점의 3차원 위치를 계산해 낼 수 있었으며, 이를 바탕으로 모니터 상의 시선 위치를 구하였다. 실험 결과, 19인치 모니터상의 임의의 지점을 사용자가 쳐다보았을 때, 약 2.01인치의 시선 위치에러 성능을 얻었다.

• 한국해양공학회지
• /
• 제35권3호
• /
• pp.183-190
• /
• 2021

Tomographic particle image velocimetry (PIV) is a widely used method that measures a three-dimensional (3D) flow field by reconstructing camera images into voxel images. In 3D measurements, the setting and calibration of the camera's mapping function significantly impact the obtained results. In this study, a camera self-calibration technique is applied to tomographic PIV to reduce the occurrence of errors arising from such functions. The measured 3D particles are superimposed on the image to create a disparity map. Camera self-calibration is performed by reflecting the error of the disparity map to the center value of the particles. Vortex ring synthetic images are generated and the developed algorithm is applied. The optimal result is obtained by applying self-calibration once when the center error is less than 1 pixel and by applying self-calibration 2-3 times when it was more than 1 pixel; the maximum recovery ratio is 96%. Further self-correlation did not improve the results. The algorithm is evaluated by performing an actual rotational flow experiment, and the optimal result was obtained when self-calibration was applied once, as shown in the virtual image result. Therefore, the developed algorithm is expected to be utilized for the performance improvement of 3D flow measurements.