• 한국멀티미디어학회논문지
• /
• 제16권3호
• /
• pp.281-289
• /
• 2013

HDR (High Dynamic Range) 영상 렌더링을 위하여 다중 노출 영상 기반의 iCAM06 영상 재생 모델이 많이 사용되고 있다. iCAM06은 HDR 영상을 표현하기 위하여 여러 단계의 색 공간 변환 및 스케일 변환을 거치게 된다. 이러한 여러 단계의 변환 중에서 높은 휘도 범위의 영상을 낮은 휘도 범위를 갖는 디스플레이에 출력하기 위한 톤 압축 (tone compression) 과정이 반드시 필요하다. 하지만 iCAM06에서의 톤 압축 시 자극치 간섭 및 색 절단 (color clipping)으로 인한 색 왜곡 (color distortion)이 발생하는 단점이 있다. 따라서 본 논문에서는 톤 압축 과정에서 발생된 색 왜곡을 IPT (Image Processing Transform)공간에서의 색차 정보를 이용하여 색 보상 (color correction)을 하는 방식을 제안하였다. 실험 결과를 통하여 제안한 색 보상 방식이 iCAM06를 비롯한 기존의 개선된 모델보다 우수한 결과를 나타냄을 확인할 수 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.249-254
• /
• 1987

This paper presents a new method for generating smooth free-form surface by local correction. B-spline surface is used for its convenience of local correction, and the direction of surface correction is fixed to the average-surface-normal direction. The surface to be corrected is approximated into a uniform cubic B-spline surface. Then, the smoothness (curvature arrows, iso-parametric lines) of the approximated surface is displayed with B-spline control points. When a control point near the region that needs correction is selected, a new point 1 mm higher than the original control point in the direction of the average surface normal is displayed. And the surface is corrected by giving the amount of control point movement interactively. Since the direction of correction is given by the program and the amount of correction is selected by the user, the method is called semiautomatic. sufficiently smooth surface can be obtained by this method. Examples are given to illustrate the method.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.4.1-4.6
• /
• 2016

Background: Most cases of facial asymmetry involve yaw deformity, and determination of the yaw correction level is very difficult. Methods: We use three-dimensional soft tissue simulation to determine the yaw correction level. This three-dimensional simulation is based on the addition of cephalometric prediction to gradual yaw correction. Optimal yaw correction is determined visually, and an intermediate splint is fabricated with computer-aided design and computer-aided manufacturing. Application of positioning devices and the performance of horseshoe osteotomy are advisable. Results: With this procedure, accurate repositioning of jaws was confirmed and patients obtained fairly good facial contour. Conclusions: This procedure is a promising method for a widespread, predictable treatment of facial asymmetry.

• 한국산학기술학회논문지
• /
• 제8권5호
• /
• pp.979-983
• /
• 2007

본 논문에서는 액정용 실드 케이스 (Shield Case)의 스트립 레이아웃 도 작성하였다. 프레스 금형에 있어서 스트립 레이아웃 도는 제품 양산을 결정하는 중요 요인이다. 장착되는 다른 부품과의 간섭요인을 용이하게 수정하기 위하여 3D CAD/CAM 시스템을 적용하였다. 블랭크 레이아웃을 최적화하고 광폭배열로 스트립 레이아웃 하여 재료 이용률을 60.17%로 향상시켰다. 또한 얇은 소재두께로 인해 변형 발생이 예상되는 노칭부위에 집중적으로 비딩공정을 추가하여 제품의 평탄도를 요구사항에 맞게 적용하였다. 사용된 3D CAD/CAM 소프트웨어는 Unigraphics NX 3.0이며 12개 공정으로 스트립 레이아웃 도를 작성하였다.

• 한국안전학회지
• /
• 제32권4호
• /
• pp.100-106
• /
• 2017

Outline map is used for the description and reconstruction of the traffic accident. One way to produce the outline map is by adopting detailed measurements from the accident site such as final position of the vehicle and pedestrian, width of the road, and locations of the oil and tire marks. This method consumes large amount of time not to mention that of the production of detailed version as fine as the picture of the site. Aerial recording equipment so called HeliCam can produce an outline map that can substitute that of manual method with even faster production time and higher resolution. However, the produced picture have errors which are resulted by distortion due to the characteristics of camera and direction of the photographing. This paper provides correction of the distortion of oultline map produced by HeliCam using Adobe Photoshop and PC-Rect. The result showed resonable error range less than 6 cm(0.1%) for $60m{\times}30m$ area taken by HeliCam. The presented method develops outline map with small error, which is useful to traffic accident analysis, and traffic accident cases analyzed in this study were also.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1992년도 가을 학술발표회 논문집
• /
• pp.240-244
• /
• 1992

The values of a linguistic variable are words, phrases, or sentences in a given language. For example, structural damage can be considered as linguistic variable with values such a 'severely damaged', 'moderately damaged', which are meaningful classifications but not clearly defined, This paper is to evaluate reasonably the correction factor of bridge capacity with the aid of fuzzy sets theory. By using the above mentioned fuzzy measure, the concept of fuzzy integral and linear membership function can be defined. It is concluded that the fuzzy sets theory cam be applied to determine reasonably the correction factor of bridge capacity.

• Journal of the Optical Society of Korea
• /
• 제18권1호
• /
• pp.23-31
• /
• 2014

Recently, the number of camera companies that produce commercializing interchangeable lens systems such as digital single lens reflex (DSLR) and compact system camera (CSC) lenses has been gradually increasing. These interchangeable lenses have various kinds of lenses with distinct specifications. In particular, the distance window among these specifications is the function most preferred by customers. Mechanical manual zoom and manual focus in these high end camera lenses with a distance window are in particular desirable specifications and are required for product quality. However, the AF lens group is linked to the zoom cam and moves. Because the AF lens group moves along with the object distance, we can not realize the distance window with only zoom locus calculation. In this paper, in order to solve the problem, we suggest an optical calculation method for a corrected AF zoom cam for an interchangeable lens with a distance window to achieve product differentiation and analyze the error in the calculation.

• Journal of Yeungnam Medical Science
• /
• 제41권3호
• /
• pp.233-233
• /
• 2024

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.1047-1050
• /
• 1997

Rapid Prototyping(RP) is an efficient method for rapid design verification and trial manufacturing. In order to improve their unique characteristics according to the working principles. Variable Lamination Manufacturing process and corresponding CAD/CAM system is developed. The objective of this study is to improve dimensional accuracy of VLM-ST process, and it can be done by offset for cutting error correction, cutting path correction for sharp edge and reference shape generation. To verify the proposed algorithms, they applied to three-dimensional shapes, such as spanner and mechanical part.

• 한국생산제조학회지
• /
• 제8권6호
• /
• pp.105-112
• /
• 1999

In this paper we deal with tool interference problem in the case of compound surface machining. A new tool interference detection and correction method based on the envelope of the tool path is suggested to identify and correct the tool interference - not only within the local path of tool movement, but also outside of the tool path. Therefore, the developed strategy can be used to check the possible interference in any region of the surface. In order to analyze quantitatively the milled surface error produced by the tool interference, improved surface prediction model is also suggested in cutting process by general cutters. The effectiveness of the proposed method is demonstrated through simulation study.