• 천문학논총
• /
• 제22권4호
• /
• pp.177-181
• /
• 2007

We present the sensitivity calculation results for observing the Cosmic Infrared Background (CIRB) by the Multi-purpose IR Imaging System (MIRIS), which will be launched in 2010 as a main payload of the Science and Technology Satellite 3 (STSAT-3). MIRIS will observe in I ($0.9{\sim}1.2um$) and H ($1.2{\sim}2.0um$) band with a $4{\times}4$ degree field of view to obtain the large scale structure (${\sim}3$ degree) of the CIRB. With the given specifications of the MIRIS, our sensitivity calculation results show that the MIRIS has a detection limit of ${\sim}9\;nW\;m^{-2}\;sr^{-1}$ (I band) and ${\sim}6\;nW\;m^{-2}\;sr^{-1}$ (H band), which is appropriate to observe the large scale structure of CIRB.

• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3347-3352
• /
• 2022

In 2013, the International Atomic Energy Agency (IAEA) changed the recommended maximum range of the Emergency Planning Zone (EPZ) to 30 km, and the Kori Nuclear Power Plant in Republic of Korea has also expanded the EPZ to 30 km, following the recommendation. As a result, metropolitan cities with a high population density are contained within the EPZ, and evacuating millions of people should be considered if the 30 km range of evacuation is to take place. This study proposes an evacuation plan using buses (public transportation) to transport people outside of the EPZ, quickly and efficiently. To verify the appropriate mode share ratio of buses that can guarantee the right of vulnerable road users and reduce traffic congestion, a model was built simulating the Kori Nuclear Power Plant in Ulsan Metropolitan City. The scenarios were established by changing the mode share ratio of buses and passenger cars by 10%. Considering a large-scale network analysis at the city level, a cell transmission model was applied to calculate the evacuation time in each scenario. The result shows that the optimal mode share ratio of buses is 40%, with a total evacuation time of 132 min, considering feasible bus fleets in Ulsan Metropolitan City.

• 종양간호연구
• /
• 제10권1호
• /
• pp.59-67
• /
• 2010

Purpose: The purpose of this study was the development and validation of knowledge scale for patients with breast cancer (KS-Br) in Korea. Methods: The process included the construction of a conceptual framework, generation of preliminary items, and the test of validity and reliability of the scale. Thirty-seven items were developed through an evaluation process by 10 experts and 24 items were finally confirmed through item analysis. Psychometric testing was performed with a convenient sample of 303 women with breast cancer. The data was analyzed using independent t-test, Pearson's correlation, and calculation of KR-20. Results: Participants averaged 70.8% correct on the test. The KS-Br has 24 items consisting of 5 categories: incidence of breast cancer, diagnosis and treatment, symptom management, sexuality, and maintenance of daily life. Validity was supported by the use of content validity, known-group technique, and criterion-related validity. Women who had undergone education intervention scored significantly higher than women who had not (p<.001). KS-Br scores were significantly correlated with those of Mishel's Illness Uncertainty Scale (r=-.214, p<.001). Internal consistency of the KS-Br was appropriate (KR20=.805). Conclusion: This study reveals that the KS-Br is reliable and valid scale to measure the knowledge of breast cancer. Therefore, this scale can be effectively utilized to assess the knowledge of patients with breast cancer regarding their disease.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권9호
• /
• pp.2942-2960
• /
• 2022

The core of cognitive radio is the problem concerning intelligent decision-making for communication parameters, the objective of which is to find the most appropriate parameter configuration to optimize transmission performance. The current algorithms have the disadvantages of high dependence on prior knowledge, large amount of calculation, and high complexity. We propose a new decision-making model by making full use of the interactivity of reinforcement learning (RL) and applying the Q-learning algorithm. By simplifying the decision-making process, we avoid large-scale RL, reduce complexity and improve timeliness. The proposed model is able to find the optimal waveform parameter configuration for the communication system in complex channels without prior knowledge. Moreover, this model is more flexible than previous decision-making models. The simulation results demonstrate the effectiveness of our model. The model not only exhibits better decision-making performance in the AWGN channels than the traditional method, but also make reasonable decisions in the fading channels.

• 한국태양에너지학회 논문집
• /
• 제22권4호
• /
• pp.26-34
• /
• 2002

Daylighting in building is very important as it has an effect on work performance as well as on their visual health. It is also regarded as a good energy conservation measure in saving energy used for lighting. There are many daylighting evaluation tools such as empirical equations, tables, nomograms, diagrams, protractors, computer simulation, scale models. This study conducted initial daylight measurements to analyze luminous environment in classrooms of elementary school and comparative analysis on three daylighting evaluation tools, such as daylight factor calculation formula, the graphic method with BRE Protractor and computer simulation with Adeline 3.0. It is found that the computer simulation tool produced the closest result to actual measurements of luminous environment in elementary school classroom, and the other simplified tools made appropriate results so that they can be used in the early stage of daylighting design process.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.1870-1875
• /
• 2007

The microchannel heat sink is promising heat dissipation method for high heat flux source. Contrary to conventional circular channel, MEMS based microchannel had rectangular or trapezoidal cross-sectional shape. In our study, we conducted three dimensional conjugate heat transfer calculation for rectangular shape microchannel. First, we simulated that channel was completely drained with known heating power. As a result we obtained calibration line, which indicates heat loss was function of temperature. Second, we simulated single phase heat transfer with various mass flux, 100-400 $kg/m^2s$. In conclusion, the single phase test verified that the present heat loss evaluation method is applicable to micro scale heat transfer devices. Heat fluxes from each side wall shows difference due to non-uniform heating. However those ratios were correlated with supplied total heat. Finally, we proposed effective area correction factor to evaluate appropriate heat flux.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.319-324
• /
• 2003

In general industrial rotating machinery is operated under 3,600 rpm as rotating speed and designed to have critical speed that is above operating speed. So, there was no problem to operate rotating machine under critical speed. But nowadays, they should be operated more than the frist critical speed as usual with the trend of high speed, large scale and hish precision in industries. In case of the large rotor assembly as the trend of large scale, using fitting method of disk or cylinder on shaft is rising for the convenience of assembly and cutting down of manufacturing cost. The shrink fitting is used to assemble lamination part on shaft for manufacturing of rotor of motor or generator in many cases and also is widely used for other machinery. In rotating system, which is compose of rotor and bearing, the critical speed is determined from inertia and stiffness for the rotor and bearings. In case of fitting assembly, analysis and design of the rotor is not easy because the rotor stiffness is determined depend on a lot of factors such as shaft material/dimension, disk material/dimension and assembled interference etc. Therefore designer who makes a plan for hish-speed rotating machine should design that the critical speed is located out of operating range, as dangerous factors exist in it. In order to appropriate design, an accurate estimation of stiffness and damping is very important. The stiffness variation depend on fitting interference is a factor that changes critical speed and if it's possible to estimate it, that Is very useful to design rotor-bearing system. In this paper, the natural frequency variation of the rotor depends on fitting interference between basic shaft and cylinder is examined by experimentation. From the result, their correlation is evaluated quantitatively using numerical analysis that is introduced equivalent diameter end the calculation criteria is presented for designer who design fitting assembly to apply with ease for determination of appropriate interference.

• 대한한의진단학회지
• /
• 제22권1호
• /
• pp.1-10
• /
• 2018

Objectives The purpose of this study is to compare the representative differential diagnosis methods of blood stasis pattern used in Korea, China and Japan, and then to characterize each diagnostic method. Methods Through the journal databases, we have selected representative tools that were developed for differential diagnosis of blood stasis pattern in Korea, China and Japan. In order to characterize the selected check-lists or questionnaires, we investigated the number of items, contents, score calculation method, internal consistency, and accuracy of each selected tool. Results A total of four diagnostic tools were finally selected; quantitative diagnosis scale of blood stasis syndrome (QDSBSS), diagnostic criteria for blood stasis (DCBS), blood stasis questionnaire (BSQ), and blood stasis syndrome questionnaire (BSSQ). The key points in the differential diagnosis for blood stasis were different for each of the diagnostic tool. The key point was oral mucosa (including tongue) status in the QDSBSS. Meanwhile it was abdominal pain/resistance in the DCBS, and general pain in the BSQ. Accuracy of the QDSBSS, the BSQ and the BSSQ were powerful but all of them was not generalized. Conclusions Therefore, it is desirable to select and apply a plurality of appropriate tools according to the characteristics of the blood stasis patients.

• KIEAE Journal
• /
• 제17권5호
• /
• pp.87-94
• /
• 2017

Purpose: Prefabricated modular space such as a container construction has recently been interested unlike the conventional construction method, and their scale have expanded from small buildings such as cafes, houses and pensions to shopping centers, complex cultural spaces where shows and exhibitions are possible doing. In this way, the container is in the spotlight as an advantage such as mobility, flexibility, correspondence, economic efficiency, recyclability and so on. However, there are no specific guidelines and standard design methods in aspects of structural calculation, functional insulation and environmental configuration. Therefore, as the first step to resolve these problems, this study has focused on the field of environmental performance of container construction, presented appropriate guidelines and searched ways to improve performances. Method: For this study, seven types of the modular building were chosen and compared, and their energy performances have been analyzed using a proven simulation tool. Essential methodology and terminology were examined to estimate and judge their efficiency. Result: In conclusion, energy performances depend on specific configuration of combined unit spaces, and design guidelines cold be set up for promoting their use in the practical field.

• 한국실내디자인학회논문집
• /
• 제18권6호
• /
• pp.60-68
• /
• 2009

Cheoungju International Craft Biennale is not just an art exhibition but more like a pubic festival which is including an experiential learning and a public participation section as well as a special exhibition and an international competition section. Thus it is strongly required to present an appropriate meaning and mood corresponding to each exhibition hall. The paper has examined the exhibition topics during the last 10 years and the plannings and contents to install the exhibition hall according the yearly topic and it has analyzed the comprehensive evaluations after the exhibition. The research scope is limited to the part related to the exhibition hall and facilities, which is including calculation of dimensions and layout, access and movement system, the appropriateness of the design and construction period, measure of applied technology appropriateness, post management as well as planning intent, estimation of the number of the visitors, preliminaries. With the results shown in the comprehensive evaluation and analysis, the paper has presented two issues, the one related to the procensure and preparation and the other related to the facilities. It is showed that both problems are due to the lack of expertise and it is necessary for the experts to participate from the first step of the procedure including planning for the successful exhibition. For the appropriate exhibition hall corresponding to the exhibition planning and scale, it is required to have the professional considerations of successful space and visitor's movement management, display environment, construction method, and post management. The study presents that architectural and interior design have to take an active part in constructing exhibition design in overall stage including the initial, practice, and evaluation stage.