• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.252-257
• /
• 2018

In this paper, we propose a mean time to failure (MTTF) to improve the solution for a cryogenic cooler, which is an important part of a cooled thermal device. Common electronic devices have a high possibility of failure due to various environmental factors, such as temperature and humidity. But some special devices (such as thermal devices) are designed to overcome environmental factors. The most affected part of a cooled thermal device's MTTF is the cryogenic cooler. The MTTF of a cryogenic cooler is affected by the device's internal heat. Therefore, if the device's internal heat is reduced, the cryogenic cooler's MTTF increases. From the present device's internal heat simulation, we analyze the improvement method of the device. The proposed improvement method's effectiveness is verified by simulation and MTTF calculation.

• Journal of Oriental Neuropsychiatry
• /
• v.9 no.1
• /
• pp.25-43
• /
• 1998

45 Dementia of Alzheimer type patients who were treated by the KOMC NP from Jan. 1996 to July. 1997 were recruited for this study in order to prove the effects of the oriental medical treatment on Dementia of Alzheimer type. Patients were strictly classified into Sasang constitutions, and then were given herbal and acupunctural treatment for various length of time. The efficiency of the treatment was assessed by criteria for memory, orientation, registration, attention and calculation, language. The following results were obtained. 1. Out of 45 cases, 14 improved to almost normal state, 13 improved a little, 16 had no change, and 2 became worse. On the whole, 60% of the patients showed improvement. 2. Out of 31 female patients, 17 patients improved, thus the rate of improvement was at 55%. Out of 14 male patients, 10 patients improved, thus the rate of improvement was at 71%. 3. The analysis of the patients constitution resulted in two Soyang-constitution, 23 Soum and 20 Taeum, Soum, Teaum responded to the treatment to an approximately equal extent. 4. Of the demendia patients involved in the study, 9 cases were mild, 14 moderate, and 22 severe, 9 mild cases, 12 moderate cases and 6 severe cases showed meaningful response to the treatment.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.6
• /
• pp.33-44
• /
• 2012

This study is as to payment improvement method of additional incidental cost to be occurred upon extension of public construction time. According to the result of analysis about the cause of non-payment of additional incidental cost of construction time extension through site examples, it was found that difficulties exist in disputes & proofing over the scope of actual cost recognition, and in this regard the result of experts opinion indicated that a construction extension pre-agreement system can be executed which agrees the scope of recognition of additional incidental cost of construction time extension once the statistical standard is clear and accurate. Accordingly, in this study, by totalling multiple sites data, calculations were implemented in terms of type of construction projects, amount of constructions, period of constructions. According to the result of calculation, the element of type of construction project and construction period appears to have none direct effect to the occurrence of additional cost of construction time extension, but direct relationship was indicated related to the contract amount element. In view of above, in this study a standard additional incidental cost of construction time extension was proposed, and presented a system improvement plan to implement the construction extension pre-agreement system.

• Journal of Korea Port Economic Association
• /
• v.37 no.4
• /
• pp.33-40
• /
• 2021

Currently, the shipping and port industries are implementing strategies to improve port processing capabilities through the expansion and efficient operation of port logistics resources to survive fierce competition with rapidly changing trends. The calculation of the port's processing capacity is determined by the loading and unloading equipment installed at the dock, and the port's processing capacity can be improved through various methods, such as additional deployment of logistics resources or efficient operation of resources in use. However, it is difficult to expect an improvement effect in a short period of time because the additional deployment of logistics resources is clearly limited in time is clear. Therefore, it is a feasible way to find an efficient operation method for resources being used to improve processing capacity. Domestic ports are also actively promoting informatization and digitalization with the development of the 4th industrial revolution technology. However, the calculation of the number of Y/T (Yard Tractor) assignments in the current unloading process depends on expert experience, and related previous studies also focus on the allocations of Y/T or Calculation of the total number of Y/T required. Therefore, this study analyzed the factors affecting the number of Y/T allocations using the loading and unloading information of incoming ships, and based on this, cluster analysis, regression analysis, and deep neural network(DNN) model were used.

• Atmosphere
• /
• v.23 no.1
• /
• pp.113-121
• /
• 2013

The objective of this study is to develop and evaluate the system to produce the real-time ensemble drought prediction data. Ensemble drought prediction consists of 3 processes (meteorological outlook using the multi-initial conditions, hydrological analysis and drought index calculation) therefore, more processing time and data is required than that of single member. For ensemble drought prediction, data process time is optimized and hardware of existing system is upgraded. Ensemble drought data is estimated for year 2012 and to evaluate the accuracy of drought prediction data by using ROC (Relative Operating Characteristics) analysis. We obtained 5 ensembles as optimal number and predicted drought condition for every tenth day i.e. 5th, 15th and 25th of each month. The drought indices used are SPI (Standard Precipitation Index), SRI (Standard Runoff Index), SSI (Standard Soil moisture Index). Drought conditions were determined based on results obtained for each ensemble member. Overall the results showed higher accuracy using ensemble members as compared to single. The ROC score of SRI and SSI showed significant improvement in drought period however SPI was higher in the demise period. The proposed ensemble drought prediction system can be contributed to drought forecasting techniques in Korea.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.3
• /
• pp.247-255
• /
• 2021

Individual passenger transfer information is not included in Seoul metropolitan subway Automatic Fare Collection (AFC) data. Currently, basic data such as travel time and distance are allocated based on the TagIn terminal ID data records of AFC data. As such, knowledge of the actual path taken by passengers is constrained by the fact that transfers are not applied, resulting in overestimation of the transport index. This research proposes a method by which a transit path that connects the TagIn and TagOut terminal IDs in AFC data is determined and applied to the transit index. The method embodies the concept that a passenger's line of travel also accounts for transfers, and can be applied to the transit index. The path selection model for the passenger calculates the line of transit based on travel time minimization, with in-vehicle time, transfer walking time, and vehicle intervals all incorporated into the travel time. Since the proposed method can take into account estimated passenger movement trajectories, transport-related data of each subway organization included in the trajectories can be accurately explained. The research results in a calculation of 1.47 times the values recorded, and this can be evaluated directly in its ability to better represent the transportation policy index.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.7
• /
• pp.1944-1950
• /
• 2014

Employment of a time consuming, sophisticated calculation using the all-atom force field and generalized-Born implicit solvent model (GBIS) for refinement of NMR structures has become practical through advances in computational methods and capacities. GBIS refinement improves the qualities of the resulting NMR structures with reduced computational times. However, the contribution of GBIS to NMR structures has not been sufficiently studied in a quantitative way. In this paper, we report the effects of GBIS on the refined NMR structures of ubiquitin (UBQ) and GB1 with subsets of distance restraints derived from experimental data. Random omission prepared a series of distance restraints 0.05, 0.1, 0.3, 0.5, and 0.7 times smaller. For each number, we produced five different restraints for statistical analysis. We then recalculated the NMR structures using CYANA software, followed by GBIS refinements using the AMBER package. GBIS improved both the precision and accuracy of all the structures, but to varied levels. The degrees of improvement were significant when the input restraints were insufficient. In particular, GBIS enabled GB1 to form an accurate structure even with distance restraints of 5%, revealing that the root-mean-square deviation was less than 1 ${\AA}$ from the X-ray backbone structure. We also showed that the efficiency of searching the conformational space was more important for finding accurate structures with the calculation of UBQ with 5% distance restraints than the number of conformations generated. Our data will provide a meaningful guideline to judge and compare the structural improvements by GBIS.

• Journal of the Korean Geosynthetics Society
• /
• v.11 no.2
• /
• pp.49-54
• /
• 2012

The final consolidation settlement is important factor in soft ground improvement because of settlement management and completion time. The compression index, which is slope of primary consolidation curve, is commonly used for the calculation of final consolidation settlement in clay layer. The existing final consolidation settlement is calculated in total consolidation layer that is assumed as one layer. This paper describes analysis result of the acquired settlement, when the consolidation layer is divided as several layer. The consolidation settlement increased according to increase of the divided layer and then it is converged. This result was unrelated to surcharge load. The division effect of layer is very high when the surcharge load is less than the consolidation layer thickness. The division effect of layer is 1.2 to 1.4 in the general surcharge load, and this value can be apply as safety factor in the calculation of final consolidation settlement.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.1
• /
• pp.60-65
• /
• 2015

In this paper, we used the sound of gunshots recorded by multiple microphones to increase the accuracy of the calculation of the distance between sniper and the microphone array. This method is crucial for achieving military objectives. Gunshots are comprised of the explosion of driving gas from the muzzle and the supersonic shock wave from the flying bullet. The original distance calculation method compares the time difference of arrival and angle of incidence to estimate the sniper's location. The disadvantage of this method is that when the angles of incidence coincide the margin of error increases, to solve this problem we suggest a new method using the characteristic changes of the shock wave with the increase of perpendicular distance between the microphone and the trajectory of the bullet. This theory is verified by experiments.

• Land and Housing Review
• /
• v.14 no.1
• /
• pp.135-144
• /
• 2023

LH Corporation uses the construction waste disposal fee standard, of which the model was developed a long time ago. Therefore, this model is problematic because it needs to reflect waste treatment facilities' technological development and environmental conditions. In this study, the estimated manpower and costs required for the process operation of waste treatment facilities were analyzed, followed by the proposed estimation criteria. This improved standard model can be used as a cost calculation standard for the recycling and treatment of construction waste in public institutions. The study also suggests that an increase in waste treatment costs is needed.