• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.3
• /
• pp.65-75
• /
• 1998

We consider connection-oriented wireless cellular networks such as the second generation wireless cellular networks and wirelss ATM networks. In these networks, a separate forward signaling channel is provided for the transmission of paging and channel allocation packets. When a call destined to a user is requested, all the base stations in the user's current location area broadcast the corresponding paging packet across forward signaling channels. By slot mode operation and paging group allocation for fusers in a location area, we can reduce relative power consumption level at battery-operated terminals. However, a sthe number of paging groups is increased for lowering relative power consumption level, a paging packet experiences higher delay to access the forward signaling channel. For the pre-negotiated quality-of-service level, paging packet delay level must be limited. In this paper, we consider static and dynamic multiplexing schemes for paging packets, and develop an analytical method for calculating paging packet delay and relative power consumption levels. Using this analytial method, we investigate the effect of network parameters on the paging packet delay and relative power consumption levels.

• International Journal of Advanced Culture Technology
• /
• v.6 no.3
• /
• pp.173-177
• /
• 2018

Masks are generated by adding different fonts of learning data characters in pixel unit, and pixel values belonging to each of the masks are divided into 3 groups. Using the directional expansion operators, we expand the text area of the test data character into 4 diagonal directions in order to create the boundary areas to distinguish it from the background area. A mask with a minimum average discordance is selected as the final recognition result by calculating the degree of discordance between the expanded test data and the masks. Image comparison using directional expansion operations more accurately recognizes test data through 4 subdivided recognition processes. It is also possible to expand the ranges of 3 groups of pixel values of masks more evenly such that new fonts can easily be added to the given learning data.

• Water for future
• /
• v.6 no.1
• /
• pp.87-99
• /
• 1973

The calculation of the comsumptive use by crop can be most accurate when it is actually measured. The mankind is not yet able tole grasp all the natural conditions or phenomena. The induces of actual measurement at a representive observatory and the formula abtained from the area werowere made as close as possible, which is called as the Blaney Criddle formcula, published in 1945. In calculating the water require-ment of consumptive use of water by farm crops, a more accurate and reasonable formula should be induced as the factors other than temperature and day-time hours according to the location of project area have also influences. The formula of Mr. Jerald E. Christianen published in 1969 is based on the induces of the records of actural measurements for 3, 928 months at 80 different stations and his formula couers a wider range of functions that calculate water requirement to induce the functions of moisture, wind, velocity, sunshine at elevatons, in addition to temperature and daytime hours in accordance with latitude and was modified to be fit to natural phenomena. The formula is being widely in use in many contries with their modification since it is worth while for usealso in korea, the formula is introduced and explained in the following.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.2
• /
• pp.63-70
• /
• 2016

A housing market in an urban area is not just a single market but a combination of regionally different submarkets. This study begins with a critical mind that previous researches did not consider the spatial autocorrelation of each area where the housings are located. The clustering analysis of housing submarket which considers spatial autocorrelation is performed as it follows. First, 4 housing market attribute variables are reducted to 1 variable by principle component analysis. Then, after calculating $Gi^*max$ by AMOEBA, 7 housing submarkets which have similar characteristics based on $Gi^*max$ are classified. The characteristics of each submarket are investigated, then political implication is deduced as the following. Different level of housing policy should be made to each cluster because each cluster has different level of spatial autocorrelation.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.77-79
• /
• 2003

New cities and industrial complexes are being developed actively because of the government policies aiming population distribution and vitalization of construction industry. To determine the investment amount, number of power lines and substations for stable power supply to newly developed residential and industrial complexes, accurate estimation of power demand is necessary. This paper propose standards for the estimation of power demands for power company and construction company to settle the debates surrounding this issue. Through a survey and analysis of existing areas, new standards that will enable more accurate estimation of power demands in new cities complexes to be developed in the future are established by calculating the average load density, load factor, utilization factor by area, use and building size after dividing the facilities into building type and the areas into the areas planned to be developed and the areas not yet planned to be developed.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.234-239
• /
• 2004

A study on the probabilistic methodology for the estimation of the remaining life of Pressurized pipelines containing active corrosion defects is presented. This reliability assessment is earned out using extream value distribution of the corroded defects instead of already published failure perssure moded like NG18 or ASME B31G. The failure probability of pipelines depends on the number of corroded defects. and it could be calculated directly as the area exceeded a defined L V(Limited Value of corrosion depth). The remaining life of pressurized pipelines can also be estimated by the PDF of extream value distribution as calculating the exceeded area with a defined failure probability.

• International Journal of Railway
• /
• v.6 no.4
• /
• pp.148-154
• /
• 2013

This article has tried to review the maximum contact stresses in the contact area of the wheel and rail as a result of lateral movement of the wheel on rail by taking advantage from Hertz theory. Since wheel movement on rail is accompanied by lateral movement due to wheel profile conisity, so the contact point of wheel and rail is not constant and the contact stresses are therefore changeable in every single moment. Since the shape of rail profile and rail inclination, wheel diameter and the mechanical properties of the wheel and rail are effective on the stresses of contact area, these parameters have been studied by applying Hertz theory. This article aims to calculate the contact stresses in different parts on the wheel surface by using Hertz theory.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1990.10a
• /
• pp.57-62
• /
• 1990

This paper is to study the effect of rectilinear confinement in high-strength concrete subjected to a monotonically increasing compressive axial loads. To investigate behavior of columns rectilinearly confined with lateral ties and longitudinal rebars, twelve specimens including two plain concrete specimens were tested. The main variables in this study are volumetric ratio of lateral ties, cistribution of lateral ties, yield strength of logitudinal steel, ratio of area of longitudinal steel to the area of cross section. The test results were not only compared with an empirical model for the stress-strain curve of rectilinearly confined high-strength concrete but also the existing model. The empirical model used calculating column capacity shows better agreement with the test results tham the existing model.

• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.2
• /
• pp.217-237
• /
• 1995

One of the most distinguished advantages of five-axis machining is that complex free surfaces(such as impeller) can be machined by one setup. Five-axis CNC machine, however, is very expensive so that its usage is restricted to a few large companies. As an economical approach to five-axis machining, this paper presents a method for machining the five-axis free surfaces(using ball-end mill) on a three-axis CNC machine with an index table. The method developed consists of: a) determining the minimum number of part setups and their interference-free and collision-free potential machining area, b) calculating actual machining area for each setup, and c) generating 3-axis cutter path for each part setup. The method has been successfully tested via computer simulations for several complex surfaces including impeller.

• Korean Journal of Hydrosciences
• /
• v.5
• /
• pp.45-55
• /
• 1994

A new method to estimate the mean areal precipitation using kriging is developed. Urlike the conventional approach, points for double and quadruple numerical integrations in the kriging equation are selected randomly, given the boundary of area of interest. This feature eliminates the conventional approach's necessity of dividing the area into subareas and calculating the center of each subarea, which in turn makes the developed method more powerful in the case of complex boundaries. The algorithm to select random points within an arbitrary boundary, based on the theory of complex variables, is described. The results of Monte Carlo simulation showed that the error associated with estimation using randomly selected points is inversely proportional to the square root of the number of sampling points.