• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.04a
• /
• pp.220-223
• /
• 2003

The methodology of micromechanical finite element method (MFEM) is proposed to calculate the micromechanical strains on fiber and matrix under mechanical and thermal loadings. For micromechanical analysis, composite structure is idealized the square and hexagonal unit cells. Boundary conditions are determined to calculate the effective material properties of composites and the strain magnification matrix. And they are verified by comparing with the results from multi cells, and the strain distributions of the unit cells are in accordance with those of the multi cells. Finally, the effective material properties of composite structure are obtained with respect to its fiber volume fraction and compared with results from rules-of-mixture.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.52-57
• /
• 2000

STD11 is one of difficult-to-cut materials and its cutting characteristic data is not built enough. A bad cutting condition of it leads to low productivity of die and mould, so it is necessary to evaluate the machining characteristics of STD11. In this paper, the relations of the geometry of ball-end mill and mechanics of machining with it are studied. The helix angle of ball-end mill varies according to a location of elemental cutting edge in the cutting process are difficult to calculate accurately. To calculate instantaneous cutting forces, it is supposed that the tangential, radial and axial cutting force coefficients are functions of elemental cutting edge location. Elemental cutting forces in the x,y and z direction are calculated by coordinate transformation. The total cutting forces are calculated by integrating the elemental cutting forces of engaged cutting edge elements. This model is verified by slot and side cutting experiments of STD11 workpiece which was heat-treated to HRC45.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1515-1517
• /
• 2008

The purposes of this study were to measure the ranges of motion in knee joint and during continuous passive motion(CPM) treatment and to computationally calculate joint angles at the knee joint dependent on the CPM machine design and its application. Four CPM machines and eleven candidates were recruited for this study. Experimental and numerical studies have been peformed to calculate the range-of-motion of CPM machines. From the experimental measurements, the average range of motions at the knee joint for the CPM machine #1, #2, #3, and #4 were lower than the manufactures suggested values due to improper alignments of the hip and knee joints to the CPM machines. Different design of CPM machine generated different outcomes of the ROM at the knee joints during CPM. The experiments and kinematic simulation in this study could be used to provide useful guidance in the treatment of CPM after joint surgery.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.678-683
• /
• 2008

Moment-based reliability analysis is the method to calculate reliability using Pearson System with first-four raw moments obtained from simulation model. But it is too expensive to calculate first four moments from complicate simulation model. To overcome this drawback the MD(multiplicative decomposition) method which approximates simulation model to kriging metamodel and calculates first four raw moments explicitly with multiplicative decomposition techniques. In general, kriging metamodel is an interpolation model that is decomposed of global model and local model. The global model, in general, can be used as the constant global model, the 1st order global model, or the 2nd order global model. In this paper, the influences of global models on the accuracy and robustness of raw moments are examined and compared. Finally, we suggest the best global model which can provide exact and robust raw moments using MD method.

• Ocean and Polar Research
• /
• v.25 no.spc3
• /
• pp.417-421
• /
• 2003

In the reliability design of the breakwater armor layer, it is often necessary to calculate its damage accumulated over the life of the breakwater. In this paper comparison is made between the two methods proposed by Hanzawa et at. in 1996 and Melby and Kobayashi in 1998 to calculate the cumulative damage of the breakwater armor layer. Tn the case where a severe damage occurs at the beginning of the life or toe breakwater, the two methods do not show significant difference, but in general the farmer predicts a cumulative damage several times larger than the latter.

• Journal of Korea Multimedia Society
• /
• v.9 no.1
• /
• pp.109-118
• /
• 2006

In this paper, we suggest the environment based disparity method that calculate the depth value of the objects from environment maps. This method using the disparity of the environment map can calculate the depth value from two environment map that acquire at different viewpoint. This method can decide the visibility of the object whether it is occluded others or not. Also, we can analogize the depth value of the object that does not relate the reference plane(in case of being in the air) and make three dimensional environment model using the proposed method

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.780-784
• /
• 2003

This parer propose a new method to calculate nodal price which is very useful data in electric market under non-optimal operation. To calculate nodal price, we employ marginal cost and power flow, and consider network loss, generator capability, and line capability. The proposed method is applied to the test system and the usefulness is verified.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.3
• /
• pp.169-175
• /
• 2008

A fine carbon fibers dispersion model is implemented to calculate the scattering range and ground level concentration of carbon fibers emitted at certain altitudes of atmospheric boundary layer. This carbon fibers dispersion model was composed by coupling a commonly used atmospheric dispersion model and an atmospheric boundary layer model. The atmospheric boundary layer model, applying the Monin-Obukov Similarity Rule obtained from measurement input data at ground level, was used to create the atmospheric boundary layer structure. In the atmospheric dispersion model, the Lagrangian Particle Model and the Markov Process were applied to calculate the trajectory of scattered carbon fibers relative to gravity and aerodynamic force, as well as carbon fibers specification.

• Journal of the military operations research society of Korea
• /
• v.3 no.1
• /
• pp.51-82
• /
• 1977

Decision making is a function of many variables, but among these, human burden (soft-ware) and machine burden (hard-ware) are critical. Decision Maker is rather concerned with the soft-ware and just wants to have machine calculate the quantitative arithmetic involved in the decision-making study, because he is responsible for that decision whether or not he knows details about the techniques used by his staffs. From the point of these considerations, computer-assisted war game model has its significance in military decision making. The major outcome of this model is time-phased FEBA movement. FEBA is moved mainly by the ratio of the Index of Combat Effectiveness (ICE). To calculate ICE, Ground Forces are concerning the Index of Firepower (IFP) of individual weapons and in the case of Air Force, sorties are allocated into each sector, and added to the Ground Force IFP. With the ratio of total ICE, FEBA is moved according to the War Game Tables and process is repeated after consideration of casualties. This model is used by IBM-370/135 in MND computer room and also tested by IBM-3741/3717 established at ROKA HQ.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.129-131
• /
• 2013

In this paper, a golf club head strikes the golf ball moves at a constant speed. Then the head of a golf club moves at a constant speed in the same direction. Then calculate the speed of the golf ball to hit a golf ball flying. It calculate the speed of the golf ball is different for each speed before hitting the golf ball.