• Investigative Magnetic Resonance Imaging
• /
• v.18 no.1
• /
• pp.34-42
• /
• 2014

Purpose : To evaluate the correlation of lesion-to-normal ratio (LNR) of signal intensity from double inversion recovery MR imaging and total choline-containing compound (tCho) resonance from single voxel MR spectroscopy in breast cancers. Materials and Methods: Between August 2008 and December 2009, 28 patients who were diagnosed as breast cancer and had undergone both double inversion recovery (DIR) MR imaging and MR spectroscopy (MRS) were included in this study. The signal intensities of the lesion (L) and ipsilateral normal breast tissue (N) were measured in region of interest of each breast cancer in DIR and contrast enhance MR image (CE-T1WI) to calculate the LNR value for each technique. MRS was performed using single-voxel MR spectroscopy. The height, width and area of tCho resonance were compared with each LNR of DIR and CE-T1WI. We used Pearson's correlation coefficient(r) for correlation analysis and the significance level was p=0.05. Results: There was no statistically significant correlation between LNR of CE-T1WI and height (r=-0.322, p=0.094), width (r=-0.233, p=0.232) and area (r=-0.309, p=0.109) of MRS tCho. There was no statistically significant correlation between LNR of DIR and height (r=0.067, p=0.735), width (r=-0.287, p=0.139) and area (r=0.012, p=0.953) of MRS tCho, either. The Pearson's correlation coefficient was 0.186 between LNRs of CET1WI and DIR (p=0.344). Conclusion: There was no statistically significant correlation between LNR of DIR and relative amount of tCho resonance of MRS.

• Korean Journal of Medicinal Crop Science
• /
• v.13 no.1
• /
• pp.17-20
• /
• 2005

Natural products has been occasionally used in place of growth regulators to control lateral root formation and growth of soybean sprouts. The study was done to measure the effects of treatment concentration of hard rubber tree (Eucommia ulmoides Oliver) leaf extract on lateral root formation, growth and morphological characters of the sprouts. Seeds of three cultivars, Pungsannamulkong, Sowonkong and Junjery, were imbibed for 5 hours into water, its 5 and 10% solutions immediately before 6 day culture. The cultured sprouts were classified into 4 categories to calculate their composition rates on the base of hypocotyl lengths; >7 cm (A),4 to 7 cm (B),<4 cm (C) and not germinated (D), and their morphological characters, fresh and dry weights were measured. Rate of A was decreased with increased concentrations, while that of C showed reverse result compared to A. Regardless of concentrations, the former rate was less in cv. Junjery than in cv. Pungsannamulkong and Sowonkong than in cv. Junjery although the latter rate was truly opposite to the former one. In 10% treatment concentration, lateral roots were less formed in cv. Junjery although nearly formed in cv. Pungsannamulkong and Sowonkong. In all the 3 cultivars, lateral roots per sprouts were decreased with increased treatment concentration. shorter and thicker sprout was observed in cv. Junjery than in the other cultivars, and in increased concentrations compared to relatively lower ones. Total fresh weight was the greatest in cv. Sowonkong due to mainly increment of its hypocotyl, but was reduced with increased concentration due to mainly decrement of hypocotyl in all the cultivars.

• Korean Journal of Medicinal Crop Science
• /
• v.13 no.1
• /
• pp.11-16
• /
• 2005

Soybean sprouts presoaked to leaf extracts were on sale as taking a growing concern about wellbeing foods. The study was carried out to compare the effects of culture period after presoaking tea (Thea sinensis L.) and hard rubber tree (Eucommia ulmoides Oliver) leaf extracts on lateral root formation, growth and morphological characters of the sprouts. Seeds of three cultivars, Pungsannamulkong, Sowonkong and Junjery, were imbibed for 5 hours into 10% solutions immediately before 5, 6 and 7 day cultures. The cultured sprouts were classified into 4 categories to calculate their composition rates on the base of hypocotyllengths; >7 cm (A),4 to 7 cm (B),< 4 cm (C) and not germinated (D), and their morphological characters, fresh and dry weights were measured. Rate of A was the lowest in Junjery of the three cultivars, while that of C showed reverse result compared to A. Similar results to that of A were observed between the three cultivars in sprout length including hypocotyl and root, diameters in middle and hook parts of hypocotyl, total fresh and dry weights. Regardless of tea and hard rubber tree leaf extract treatments, longer culture periods increased rate of A due to decrements of B, C and D, and also did the growth and the morphological characters mentioned above. Although longer culture periods reduced the increment of lateral roots, the latter treatment was more delayed in their formation and less in the roots per sprout than the former one. The growth and the morphological characters above were less in the latter treatment than in the former one in general, meaning that hard rubber tree leaf extract could more repress growth of soybean sprouts than tea leaf extract.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.2
• /
• pp.59-70
• /
• 2017

$SiO_2$ is one of the most abundant constituents of the Earth's crust and mantle. Probing its electronic structures at high pressures is essential to understand their elastic and thermodynamic properties in the Earth's interior. The in situ high-pressure x-ray Raman scattering (XRS) experiment has been effective in providing detailed bonding transitions of the low-z materials under extreme compression. However, the relationship between the local atomic structures and XRS features at high pressure has not been fully established. The ab initio calculations have been used to overcome such experimental difficulties. Here we report the partial density of states (PDOS) of O atoms and the O K-edge XRS spectra of ${\alpha}-quartz$, ${\alpha}-cristobalite$, and $CaCl_2$-type $SiO_2$ phases calculated using ab initio calculations based on the full-potential linearized augmented plane wave (FP-LAPW) method. The unoccupied O PDOSs of the $CaCl_2$-type $SiO_2$ calculated with and without applying the core-hole effects present significantly distinctive features. The unoccupied O p states of the ${\alpha}-quartz$, ${\alpha}-cristobalite$ and $CaCl_2$-type $SiO_2$ calculated with considering the core-hole effect present similar features to their calculated O K-edge XRS spectra. This confirms that characteristic features in the O K-edge XRS stem from the electronic transition from 1s to unoccupied 2p states. The current results indicate that the core-hole effects should be taken in to consideration to calculate the precise O K-edge XRS features of the $SiO_2$ polymorphs at high pressure. Furthermore, we also calculated O K-edge XRS spectrum for $CaCl_2$-type $SiO_2$ at ~63 GPa. As the experimental spectra for these high pressure phases are not currently available, the current results for the $CaCl_2$-type $SiO_2$ provide useful prospect to predict in situ high-pressure XRS spectra.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.12 no.1
• /
• pp.42-62
• /
• 2008

Objectives: It is well known that some parameters of the photoplethysmogram (PPG) acquired by time domain contour analysis can be used as markers of vascular aging. But the previous studies that have been performed for frequency domain analysis of the PPG to date have provided only restrictive and fragmentary information. The aim of the present investigation was to determine whether the harmonics extracted from the PPG using a fast Fourier transformation could be used as an index of vascular aging. Methods: The PPG was measured in 600 recruited subjects for 30 second durations, To grasp the gross age-related change of the PPG waveform, we grouped subjects according to gender and age and averaged the PPG signal of one pulse cycle. To calculate the conventional indices of vascular aging, we selected the 5-6 cycles of pulse that the baseline was relatively stable and then acquired the coordinates of the inflection points. For the frequency domain analysis we performed a power spectral analysis on the PPG signals for 30 seconds using a fast Fourier transformation and dissociated the harmonic components from the PPG signals. Results: A final number of 390 subjects (174 males and 216 females) were included in the statistical analysis. The normalized power of the harmonics decreased with age and on a logarithmic scale reduction of the normalized power in the third (r=-0.492, P<0.0001), fourth (r=-0.621, P<0.0001) and fifth harmonic (r=-0.487, P<0.0001) was prominent. From a multiple linear regression analysis, Stiffness index, reflection index and corrected up-stroke time influenced the normalized power of the harmonics on a logarithmic scale. Conclusions: The normalized harmonic power decreased with age in healthy subjects and may be less error prone due to the essential attributes of frequency domain analysis. Therefore, we expect that the normalized harmonic power density can be useful as a vascular aging marker.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.2
• /
• pp.327-335
• /
• 2018

In order to calculate the quality management cost of construction work, the process must conform to relevant laws and regulations. In details, the cost of the various items such as quality test fee and quality control activity cost are required to be calculated. Regarding the quality management costs, the labor cost is applied to the quality examination fee and the calculation unit quantity in the construction quality management duties. The application of the unit price of the labor cost stipulates that Construction Association of Korea and Korea Engineering & Consulting Association apply the unit price which is surveyed and published. However, in the related laws and regulations, the standard of the quality manager and quality tester is not clear. This accounts for the confusion in the cost of construction management and the cost of labor. In the current law, the allocation standard of quality control personnel is specified according to the size of the construction, but the standard of placement of quality testers is not specified. At the construction site, there is no assignment criteria manpower for quality testers except quality managers, or very little work is being done. The quality control personnel conducts the quality test work to be carried out by the quality tester, and this carrying out heavy work. Therefore, it is difficult to maintain quality control activities. In this study, the labor cost of quality management expenses and the allocation criteria of quality managers and quality testers are established and presented for the purpose of securing the quality of the construction work and preventing the construction work. It is stipulated that the standards of the relevant laws and regulations, which are not clear, should be classified into quality control personnel and quality testers according to the size of the construction. Based on the unit price of Korea Engineering & Consulting Association, the personnel expenses of quality managers and quality testers are proposed to apply the unit price of engineer (professional engineer, specialist, advanced, intermediate, beginner) and skilled technicians (advanced, intermediate, beginner).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.12
• /
• pp.1-5
• /
• 1972

In order to compare the analytical efficiency of the Kjeldahal, Dye binding and Biurett method for the determination of nitrogen content in the brown rice, correlation coefficients were calculate with the analytical data obtained by the above mentioned 3 different methods for the brown rice of 36 varieties or lines grown at 5 different nitrogen levels (0, 7.5, 15.0, 22.5 and 30.0kg/10a). Analysis of variance were made for the data of 6 varieties among those 36, and compared the precision of the data obtained by the 3 analytical methods. The expenditure (in terms of chemicals and labour) required for the 3 methods are also compared. The results are summarized as follows; 1. The correlation between D. B. C. and Kjeldahl value were generally more significant than the correlation between the value of Biurett and the value of Kjeldahl. But, the D. B. C. method generally overestimates than the Kjeldahl method at both extreme low and extreme high nitrogen contents, and the Biurett method includes more dispersed error than other two methods, though the optical values are parallel to the Kjeldahl nitrogen values at any levels of nitrogen applied. 2. The varietal difference in nitrogen value obtained by the 3 methods were different at the different nitrogen level applied. That is the interaction between variety and analytical method, and between the nitrogen level and analytical method were significant statistically. 3. The coefficient of variance (C, V.) was largest in the data analyzed by Biurett method and next in the data analayred by D. B. C. method. In the data analyzed by Biurett, the C. V. increased along onglong increase of nitrogen applied. But, in the data obtained by D. B. C. or Biurett the C. V. increased along the decrease of nitrogen applied. 4. From the comparison of the expenditure (in terms of chemicals and labour) required for the analysis of 100 samples by 3 methods, it was noticed that, the Biurett or D. B. C. method largely curtail the chemical expenditure and labour costs. Especially the Biurett method could curtail more labour costs.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.4
• /
• pp.456-463
• /
• 1996

The purpose of the present study is to estimate the regional and seasonal variations of dissolved inorganic nitrogen (DIN) flux across the sediment-water interface of the inner and central areas of Hiroshima Bay from August 1994 to May 1995. In addition it compares the measured methods and estimates the effect of DIN released from sediment to the primary production of Hiroshima Bay. One method used in this study is to calculate DIN flux from a concentration gradient between sediment porewaters and the overlying water, and the other method is to measure DIN flux from the sediment-core experiment. The fluxes of $NH_{4}^{+}-N\;and\;NO_{2}^{+}\;+\;NO_{3}^{-}-N$ in the inner area were higher than those in central area, all of which showed seasonal variation. $NH_{4}^{+}-N$ flux was maximum in August, while $NO_{2}^{-}\;+\;NO_{3}^{-}-N$ flux was high in January compared with the other seasons. The calculated $NH_{4}^{+}-N\;and\;NO_{2}^{-}+NO_{3}^{-}-N$ fluxes from sediments were $18.2\~60.8\;{\mu}g-at/m^2{\cdot}hr\;and\;0.24\~18.2\;{\mu}g-at/m^2{\cdot}hr$, respectively. The measured $NH_{4}^{+}-N\;and\;NO_{2}^{-}+NO_{3}^{-}-N$ fluxes across the sediment-water interface were $2.00\~111\;{\mu}g-at/m^2{\cdot}hr\;and\;-265\~82.9\;{\mu}g-at/m^2{\cdot}hr$, respectively. The former was lower than the tatter. The calculated $NH_{4}^{+}-N$ flux showed closer relation to environmental factors (dissolved of gen in the overlying water, temperature and redox condition of the sediments) than the measured one did. On the other hand, in the case of $NO_{2}^{-}+NO_{3}^{-}-N$ flux both the calculated and the measured showed little relation to environmental factors, while they turned out to have stronger relation with their concentration in sediments. DIN released from the sediment is expected to support about $25\%\~67\%$ of the primary production in Hiroshima Bay.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.6
• /
• pp.654-661
• /
• 2007

The goal of this research was to identify the impact of silicate polymerization on the formation of insoluble aluminiumsilicate salts which could be a cause of irreversible fouling in the membrane process by lab-scale test. For this, the amount and characteristics of precipitates that were formed in six samples with different Al and Si concentration were analyzed. And the particles was also observed by SEM-EDS(Scanning Electron Microscope - Electron Dispersion Spectrophotometer) to compare morphology and ratio of Al and Si in each precipitates. Finally the reactive and nonreactive silicate contents in the solution and precipitates were analyzed to calculate silicate form content in each fraction. The amount of precipitates was in proportion to the total concentration of both element in solution. And the amount of insoluble particle that was not dissolved in the acid solution was recorded the highest in the sample 2 of which Si concentration was lower than the saturation concentration, 50 mg/L. The content of reactive silicate in precipitates was also recorded the highest value in sample 2 of which almost silicate form was reactive. When the silicate concentration is same, that value was recorded the highest in the sample with highest Al concentration. The SEM morphology of the precipitates was similar to that of Aluminiumhydroxide and the insoluble precipitates was not dissolved in acidic solution with pH 2.7 was able to observed only in sample 2. The ratio of Al and Si in the precipitates was ranged $0.48\sim3.14$, thai of sample 2 was recorded the highest value, 3.14. It is concluded that the insoluble aluminiumsilicate could be easily formed in the solution of which silicate exist as a reactive form and coexisting Al is sufficient.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.4
• /
• pp.276-282
• /
• 2013

The reclaimed water has been highlighted as a representative alternative to solve the lacking water resources. This study examined the reduction of residual free chlorine by temperature (5, 15, $25^{\circ}C$) and initial injection concentration (1, 2, 4, 6 mg/L) in the reclaimed water and carried out propose on the calculating method of the optimal chlorine dosage. As the reclaimed water showed a very fast reaction with chlorine at the intial time comparing to that of drinking water, the existing general first-order decay model ($C_t=C_o(e^{-k_bt})$) was not suitable for use. Accordingly, the reduction of residual free chlorine could be estimated in a more accurate way as a result of applying the exponential first-order decay model ($C_t=a+b(e^{-k_bt})$). ($r^2$=0.872~0.988). As a result of calculating the bulk decay constant, it showed the highest result at 653 $day^{-1}$ under the condition of 1 mg/L, $25^{\circ}C$ for the initial injection whereas it showed the lowest result at 3.42 $day^{-1}$ under the condition of 6 mg/L, $5^{\circ}C$ for the initial injection. The bulk decay constant tends to increase as temperature increases, whereas the bulk decay constant tends to decrease as the initial injection concentration increases. More accurate calculation for optimal chlorine dosage could be done by using the experimental results for 30~5,040 min, after the entire response time is classified into 0~30 min and 30~5,040 min to calculate the optimal chlorine dosage. In addition, as a result of calculating the optimal chlorine dosage by temperature, the relationships of initial chlorine demand (y) by temperature (x) could be obtained such as y=1.409+0.450x to maintain 0.2 mg/L of residual free chlorine at the time after 4 hours from the chlorine injection.