• The Journal of Information Systems
• /
• v.16 no.1
• /
• pp.47-64
• /
• 2007

The telecommunication service industry plays a major role in the realization of the perfect information society in the 21st century and, has a great influence in society and culture. Using the Calculable General Equilibrium Model, we analyze the telecommunication service's economic effects on other industries as well as on the national economy. In 2001, the 8 percent increase in the telecom sales caused the 5 billion dollar increase in the GDP, which seems to continue to bring about no less than 5 billion dollar GDP increase each year until 2030. The telecom sales increase has been evaluated to have disproportionately positive effect on transmission device and audio equipment industries. In summary, the telecom sales have a positive net enぉ on the GDP and on most of the industries with a few exceptions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.267-268
• /
• 2009

Resistance standards from 1 ${\Omega}$ to 100 $k{\Omega}$, with calculable frequency dependencies of up to 1 MHz, have been developed for the calibration of commercial inductance-capacitance-resistance (LCR) meters and impedance analyzers. The resistors are designed on the basis of single bifilar loops. The typical resistance change from dc to 1 MHz is from 200 to $800\;{\mu}{\Omega}/{\Omega}$. According to the measurement results, the frequency dependencies of the resistors are severaltimes lower than the measurement uncertainty of commercial LCR meters.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.3
• /
• pp.113-119
• /
• 2002

A target adaptive guidance(TAG) algorithm is proposed employing the near-zone signal that can be measured from an infrared seeker. The guidance order is composed of a conventional PNG command and an additional command to be calculable from an additional LOS rate between a hot point of target and a required intercept point. The characteristic of the near-zone signal is similar to that of LOS rate that is inversely proportional to the square of time-to-go. Hence the proposed scheme can be applied to real systems with no estimator for time-to-go. From analysis results on the miss distance with perfect missile and perfect seeker, it follows that the proposed TAG algorithm guarantees missile to be ideally guided to the required intercept point. And it is less affected by the TAG start time and a proportional navigation ratio than other TAG schemes using a LOS rate such as a step bias or a ramp bias.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.8 no.6
• /
• pp.25-32
• /
• 1971

The super turn style bat-wing antenna which are used wide over the world has omnidireclionality, wide band frequency characteristics and etc. Nevertherless its practical mechanism is unknown. In this paper, the current distribution eqiiations of bat wing antenna which have close relations with the above mechanism are introduced and the coefficients are shown to be calculable by confuter.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1867-1870
• /
• 2002

In the present paper, we will focus on the characterization of the biological network behaviour, in terms of synchronization and desynchronization of the measured signals by Micro Electrode array. We evaluate a easy calculable estimator that implies de/synchronization property of the biological neural network.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.519-520
• /
• 2008

교류에서의 전기저항값은 저항 elements 사이에서 나타나는 stray 전기용량과 elements의 길이에서 유도되는 인덕턴스의 영향으로 직류에서의 저항값과 차이를 보이게 된다. 이러한 직류와 교류에서의 저항값 차이가 대단히 작게 나면서 직류에서와 측정하는 교류에서의 저항값의 차이를 계산에 의해서 산출할 수 교류저항 표준기가 개발되었다. 개발된 교류저항표준기는 bi-filar 구조의 1 $k\Omega$로서, 1.6 kHz에서 직류/교류 저항값의 차이는 0.02 ${\mu}{\Omega}/{\Omega}$ 보다 작으며, 시정수는 1 kHz에서 $(8{\pm}2)\times10^{-10}$으로 측정되었다. 개발된 교류저항 표준기는 교류저항 국가표준에 최상급 표준기로 사용이 되어질 것이다.

• Communications for Statistical Applications and Methods
• /
• v.30 no.4
• /
• pp.403-410
• /
• 2023

Two-Phase sampling, which was first introduced by Neyman (1938), has various applications in different forms. Variance estimation for two-phase sampling has been an important research topic because conventional variance estimators used in most softwares are not working. In this paper, we considered a variance estimation for two-phase sampling in which stratified two-stage cluster sampling designs are used in both phases. By defining a conditionally unbiased estimator of an approximate variance estimator, which is calculable when all elements in the first phase sample are observed, we propose an explicit form of variance estimator of the double expanded estimator for a two-phase sample. A small simulation study shows the proposed variance estimator has a negligible bias with small variance. The suggested variance estimator is also applicable to other linear estimators of the population total or mean if appropriate residuals are defined.

• Nuclear Engineering and Technology
• /
• v.22 no.2
• /
• pp.95-100
• /
• 1990

The exact expression for the 1151 force on a fuel assembly in a reactor core is derived in terms of calculable hydraulic parameters. The relation for the lift force. pressure drop, buoyancy force, viscous force. and fuel assembly weight is discussed. Based on the derived exact expression. error analysis is made for a simple expression applying COBRA IV-i to a typical PWR fuel assembly. The error analysis revealed that the error of the simple expression consists of four terms and the overall error depends on the flow rate change direction, and its magnitude is about 1%.

• Journal of KIBIM
• /
• v.4 no.4
• /
• pp.13-23
• /
• 2014

After being introduced, Building Information Modeling (BIM) has been actively applied to the cost estimation of construction projects, and various studies on BIM based quantity take-off have been carried out. In practice, however, these calculations take considerable time, because BIM based quantity take-off is further conducted along with 2D-based quantity take-off. Studies on the quantity take-off using BIM spatial objects have been carried out on early stages of projects, but how this method differs from the existing quantity take-off method and how accurate it is in comparison have rarely been verified. Therefore, by comparing 2D based quantities with quantities through BIM spatial objects, this study analyzed the accuracy of quantity take-off using BIM spatial objects. To this end, the properties of BIM spatial objects and quantity calculable spatial types were analyzed, and existing 2D-based quantities and quantities extracted from BIM spatial objects were compared through a case study. As a result, the quantity of spatial objects found to be more by about 7.13% in 0.05% and therefore, this difference should be considered during quantity take-off using BIM spatial objects. Through the results of this study, we can improve the accuracy of quantity take-off using BIM spatial objects in the early stage of a construction project.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.5
• /
• pp.423-433
• /
• 2016

In this paper, we consider the cybersecurity issue of ship information system (SIS) from a new perspective which is called opacity. For a SIS, its confidential information (named as "secret") may be leaked through the working behaviors of each Distributed Control Unit (DCU) from an outside observer called an "intruder" which is able to determine ship's mission state by detecting the source of each data flow from the corresponding DCUs in SIS. Therefore we proposed a dual layer mechanism to enforce opacity by activating non-essential DCU during secret mission. This mechanism is calculated by two types of insertion functions: Safety-assured insertion function ($f_{IS}$) and Admissibility-assured insertion function ($f_{IA}$). Due to different objectives, $f_{IS}$ is designed to confuse intruder by constructing a non-secret behaviors from a unsafe one, and the division of $f_{IA}$ is to polish the modified output behaviors back to normal. We define the property of "$I_2$-Enforceability" that dual layer insertion functions has the ability to enforce opacity. By a given mission map of SIS and the marked secret missions, we propose an algorithm to select $f_{IS}$ and compute its matchable $f_{IA}$ and then the DCUs which should be activated to release non-essential data flow in each step is calculable.