• The Journal of the Korean dental association
• /
• v.10 no.12
• /
• pp.803-807
• /
• 1972

사람타액의 Amylase 부분 정제를 위하여 각 %의 Ammonium Sulfate 포화획분을 얻은 다음 Calcium phosphate gel로 처리하고 각 농도의 Na₂HPO₄로 유출시킨 일차실험결과는 다음과 같다. 1. Ammonium Sulfate 포화획분중 50-70% 포화획분의 Amylase활성이 가장 높았다. 2. Amylase 비활성은 0.02M Na₂HPO₄로 유출한 획분에서 가장 높았다.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.1
• /
• pp.83-90
• /
• 2011

The purpose of this research is to investigate the effect of AFm formation on the stiffening process of cement paste. High and low alkali sulfate clinkers were used for the experiments. The flow and stiffening behavior of cement paste was investigated using modified ASTM C403 penetration resistance test and oscillatory shear rheology. X-ray powder diffraction (XRD) was used for phase identification associated with stiffening of the paste. It was found from the results that low alkali clinker mixture produced very strong premature stiffening whereas high alkali clinker mixture did not cause premature stiffening. This is because of the large amount of alkali sulfate present in the clinker. Addition of calcium and sodium chloride to the high alkali clinker mixture caused faster stiffening and set.

• Textile Coloration and Finishing
• /
• v.17 no.5 s.84
• /
• pp.20-25
• /
• 2005

The colorants were extracted from black soybean using a buffer solution. Dyeing properties and the fastness of silk fabric dyed with black soybean extracts were investigated. K/S values of dyed fabric were increased with concentration of black soybean extracts. Magnesium sulfate, nickel sulfate and calcium chloride as mordants are used to obtain reddish purple color. Optimum dyeing temperature of black soybean extracts was $30^{\circ}C$. Fastness were generally good except for light fastness which was extremely poor.

• The Korean Journal of Mycology
• /
• v.27 no.4 s.91
• /
• pp.252-255
• /
• 1999

This study was carried out to investigate the physiological charateristics of Hericium erinaceus in sawdust media. The optimum temperature was $25^{\circ}C$ and the optimum pH was 5. Mycelial growth and density of H. erinaceus was quite good when oak tree sawdust were used as cultural substrates. The best mycelial growth in H. erinaceus were observed when wheat pollard was added as supplement on sawdust substrates. The optimum supplement ratios of wheat pollard and magnecium sulfate were 20% and 0.1% respectively, for H. erinaceus.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.5
• /
• pp.104-111
• /
• 2015

This study shows the mechanical properties of alkali-activated slag cement (AASC) synthesized using sulfate with NaOH solution. The used sulfates were calcium sulfate ($CaSO_4$, denoted CS) and sodium sulfate ($Na_2SO_4$, denoted SS). The replacement ratio of sulfates was 2.5, 5.0, 7.5 and 10.0% by weight of slag. NaOH solution of 2M and 4M concentration was used. A sample was activated with sulfate and activated with blended activator (blending NaOH solution with sulfate) respectively. 24 mix ratios were used and the water-binder weight ratio for the test was set 0.5. This research carried out the compressive strength, flexural strength, ultrasonic pulse velocity (UPV), absorption and X-ray diffraction (XRD). In the case of samples with CS, sample with 7.5% CS, sample with 2M NaOH+5.0% CS and sample with 4M NaOH+5.0% CS showed the good performance in the strength development. In the case of samples with SS, sample with 10.0% SS, sample with 2M NaOH+7.5% SS and sample with 4M NaOH+2.5% SS obtained good performance in strength. The results of UPV and water absorption showed a similar tendency to the strength properties. The XRD analysis of samples indicated that the hydration products formed in samples were ettringite, CSH and silicate phases. In this study, it is indicated that when compared to the use of sulfate only, the use of both sulfate and NaOH solution makes mechanical properties of AASC better.

• Journal of Periodontal and Implant Science
• /
• v.37 no.3
• /
• pp.465-478
• /
• 2007

Various periodontal barrier membranes used in many clinical and experimental fields, and many recent studies of membranes have reported good results. To improve clinical results, selection of barrier membranes is an important factor. So, we need not only to evaluate various barrier mem-branes, but also to understand the property of barrier membranes appropriate to defect characteristics. For this purpose, this study reviewed available literature, evaluated comparable experimental models, and compared various barrier membranes. From above mentioned methods, the following conclusions are deduced. 1. In i-wall periodontal defect models, new bone formation showed a consistent result, almost 30% of the defect size. New cementum formations measured mostly 40% of the defect size, but showed more variations than new bone formations. This seems to be resulted form difference in experimental methods, so standardization in experimental methods is needed for future studies. 2. Application PLGA barrier membrane to periodontal defect demonstrated improved healing in new bone and new cementum. 3. There was a minimal periodontal regeneration with calcium sulfate barrier membrane only. But, there was better healing pattern in combination of calcium sulfate membrane with bone graft material, such as DFDBA, 4. There was no significant difference between the experimental group that used chitosan mem-brane only and the control group. But, in combination with bone graft material for space maintanence, periodontal regeneration was improved. Overall, Space maintenance is a critical factor for Guided tissue regeneration using barrier membranes. Also, a barrier membrane itself that has difficulty in maintaining space, achieved better result when used with graft material.

• Journal of the Korean Ceramic Society
• /
• v.41 no.10 s.269
• /
• pp.756-765
• /
• 2004

We present extraction process and reaction mechanism of boric acid from one of calcium borate ores, colemanite by reaction with sulfuric acid. Colemanite has been fully decomposed under pH 5 with sufficiency amount of sulfuric acid, more than the amount stoichiometrically required. Calcium sulfate was separated out, leaving boron in the liquid phase after sulfuric acid addition. The extraction process of boric acid was affected by dissolution temperature and time, amount of sulfuric acid and ammonium sulfate, pH and a degree of concentration before recrystallization. The $SiO_2$ of the impurities which colemanite contains was insoluble so that it was separated out with calcium sulfate from liquid phase. The species of $CaO,\;Al_2O_3,\;Fe_2O_3,\;MgO$ were remained in a liquid phase after reaction with sulfuric acid. These impurities were separated out by addition of ammonia to the liquid phase, funhermore, boric acid was produced by process of pH adjustments and acidification, concentration, and recrystallization.

• Korean journal of food and cookery science
• /
• v.20 no.2
• /
• pp.119-125
• /
• 2004

Effects of various chemical additives and heat treatments were investigated on the wheat flour doughs and breads. Ammonium ferric citrate, Ca-citrate, CaCl$_2$, FeSO$_4$, MgCl$_2$and ZnO were mixed respectively to the flour up to 0.1% of flour dry weight basis. Ammonium ferric citrate and ferric sulfate showed no significant effects on the dough properties and magnesium sulfate, calcium chloride and zinc oxide increased elastic properties and optimum dough mixing time. However, calcium citrate and magnesium chloride showed no significant effects on the dough mixing properties. Most of chemicals were detrimental on the bread volume except MgSO$_4$ and CaCl$_2$. Breads with MgSO$_4$ and CaCl$_2$ retained the equal or slightly higher volume compared to control bread. Crumb and crust colors of breads with addition of chemicals were changed to lighter than that of control bread. L values both of crumb and crust increased with addition of chemicals except Ca-citrate. To inactivate the endogenous enzymes of flour, flour was roasted under electric oven, exposed to UV and microwave. Those heat treatments of flour increased dough stability and produced no dough breakdown after optimum mixing time. However, bread volume of heat-treated flour decreased.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.19 no.3
• /
• pp.265-286
• /
• 1997

Bone morphogenetic proteins(BMPs) are a group of transforming growth factor beta(TGF-${\beta}$)-related factors and multifunctional proteins, especially the only known biologic factors capable of inducing endochondral bone formation at an extraskeletal site. This study was performed to investigate the effect of the partially purified porcine BMP(pBMP) at an ectopic site. PBMP was partially purified from porcine bone matrix and its activity was monitored by an in vivo bioassay. The purification method utilized extraction of the bone-inducing activity with 4M guanidine, followed by chromatography on heparin-Sepharose. Active fractions were assayed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. And the fractions were reconstituted with inactive insoluble collagenous bone matrix from rats, acid soluble type I collagen from rat tail and chondroitin-6-sulfate sodium salt and implanted into the pectroralis muscle pouches of Sprague-Dawley rats. And the carrier complex was implanted on the opposite side as control. The rats were sacrificed at the day of 1st, 3rd, 5th, 7th, 11th, 14th and 21st after implantation and examined histologically, radiologically and biochemically. And alkaline phosphatase activity and calcium content were used as indices of bone formation. The results were as follows ; 1. Active fractions were localized in a zone between 31 and 40 KDa on SDS-PAGE. 2. The implanted 3.0mg of the partially purified pBMP induced cartilage and bone in the muscle tissue of rats through an endochondral ossification process. 3. Inactive insoluble bone matrix, type I collagen and chondroitin-6-sulfate have functioned as carriers for pBMP, but revealed some foreign body reactions. 4. Soft X-ray didn't reveal significant change between the experimental and the control group. 5. The alkaline phosphatase activities in the experimental group of 5th, 7th, 11th, 14th and 21st were increased significantly compared with control (p<0.01) with the peak in the group of 11th day. 6. With time, the calcium content of the experimental group increased. And the calcium contents in the experimental group of 11th, 14th and 21st were increased significantly compared with control (p<0.01).

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.1
• /
• pp.59-65
• /
• 2016

This study examined the compressive strength development and pH values of alpha-calcium sulfate hemihydrate(${\alpha}-CH$)-based binders developed for vegetation concrete with neutral pH between 6~7. Considering cost down and strength enhancement of the prepared binders, the ${\alpha}-CH$ was partially replaced by ground granulated blast furnace slag(GGBS), fly ash(FA), or ordinary Portland cement(OPC) by 25% and 50%. The compressive strength of mortars using 100% ${\alpha}-CH$ was 50% lower than that of 100% OPC mortars. With the increase of the replacement level of GGBS or FA, the compressive strength of ${\alpha}-CH$-based mortars tended to decrease, whereas the pH values were maintained to be 6.5~7.5. The main hydration products of ${\alpha}-CH$-based binders with GGBS or FA were a gypsum($CaSO_4$), whereas portlandite($Ca(OH)_2$) was not observed in such binders. Meanwhile, the pH values of ${\alpha}-CH$-based binders with OPC exceeded 11.5 due to the formation of $Ca(OH)_2$ phase as a hydration product. From the thermogravimetric analysis, the amount of $Ca(OH)_2$ in ${\alpha}-CH$-based binders with OPC was evaluated to be approximately 10% of the cement content.