• Journal of Periodontal and Implant Science
• /
• 제52권4호
• /
• pp.261-281
• /
• 2022

Purpose: Short implants are a potential alternative to long implants for use with bone augmentation in atrophic jaws. This meta-analysis investigated the survival rate and marginal bone level (MBL) of surface-modified short vs. long implants. Methods: Electronic and manual searches were performed for articles published between January 2010 and June 2021. Twenty-two randomized controlled trials (RCTs) comparing surface-modified short and long implants that reported the survival rate with at least 1 year of follow-up were selected. Two reviewers independently extracted the data, and the risk of bias and quality of evidence were evaluated. A quantitative meta-analysis was performed regarding survival rate and MBL. Results: The failure rates of surface-modified short and long implants differed significantly (risk ratio, 2.28; 95% confidence interval [CI], 1.46, 3.57; P<0.000). Long implants exhibited a higher survival rate than short implants (mean follow-up, 1-10 years). A significant difference was observed in mean MBL (mean difference=-0.43, 95% CI, -0.63, -0.23; P<0.000), favoring the short implants. Regarding the impact of surface treatment in short and long implants, for hydrophilic sandblasted acid-etched (P=0.020) and titanium oxide fluoride-modified (P=0.050) surfaces, the survival rate differed significantly between short and long implants. The MBL differences for novel nanostructured calcium-incorporated, hydrophilic sandblasted acid-etched, and dual acid-etched with nanometer-scale calcium phosphate crystal surfaces (P=0.050, P=0.020, and P<0.000, respectively) differed significantly for short vs. long implants. Conclusions: Short surface-modified implants are a potential alternative to longer implants in atrophic ridges. Long fluoride-modified and hydrophilic sandblasted acid-etched implants have higher survival rates than short implants. Short implants with novel nanostructured calcium-incorporated titanium surfaces, hydrophilic sandblasted acid-etched surfaces, and dual acid-etched surfaces with nanometer-scale calcium phosphate crystals showed less marginal bone loss than longer implants. Due to high heterogeneity, the MBL results should be interpreted cautiously, and better-designed RCTs should be assessed in the future.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제30권5호
• /
• pp.417-427
• /
• 2008

The aim of this study is to investigate the effect of anodizing surface to osseointegration of implant by using of resonance frequency analysis (RFA), quantitative and qualitative assessment of an anodically modified implant type with regard to osseous healing qualities. A total of 96 screw-shaped implants were prepared for this study. 72 implants were prepared by electrochemical oxidation with different ways. 24 (group 1 SP) were prepared at galvanostatic mode in 0.25M sulfuric acid and phosphoric acid. 24 (group 2GC) were prepared at galvanostatic mode in calcium glycerophosphate and calcium acetate and 24 (group 3 CMP (Calcium Metaphosphate) Coating were prepared at galvanostatic mode in 0.25M sulfuric acid and phosphoric acid followed by CMP coating. Rest of 24 (control group were as a control group of RBM surface. Bone tissue responses were evaluated by resonance frequency analysis (RFA) that were undertaken at 2, 4 and 6 weeks after implant placement in the mandible of mini-pig. Group 1 SP (anodized with sulfuric acid and phosphoric acid implants) demonstrated slightly stronger bone responses than control Group RBM. Group 2 GC (anodized surface with calcium glycerophosphate and calcium acetate implants) demonstrated no difference which were compared with control group. Group 3 GMP (anodized and CMP coated implants) demonstrated slightly stronger and faster bone responses than any other implants. But, all observation result of RF A showed no significant differences between experimental groups with various surface type. Histomorphometric evaluation demonstrated significantly higher bone-to-implant contact for group 2 GC. Significantly more bone formation was found inside threaded area for group 2 GC. It was concluded that group 2 GC (anodized surface with calcium glycerophosphate and calcium acetate implants) showed more effects on the bone tissue responses than RBM surface in initial period of implantation. In addition, CMP showed a tendency to promote bone tissue responses.

• 한국식품과학회지
• /
• 제17권6호
• /
• pp.447-453
• /
• 1985

숙성중 무우 김치 조직의 연부현상을 방지하기 위하여 예비열처리와 $CaCl_2$의 효과를 조사하고 이를 이용하여 무우조직의 경도가 높은 김치를 제조하였다. 무우조직중의 펙틴분해효소인 폴리갈락투로나제(PG)는 펙틴에스테라제(PE)보다 더 낮은 농도의 $CaCl_2$에서 저해되었고, PE의 최적온도는 $50{\sim}55^{\circ}C,$ PG는 $45^{\circ}C$이었다. 따라서 0.05M $CaCl_2$용액에서 $55^{\circ}C$로 2시간동안 열처리 하여 PE는 활성화 시키고 PG는 억제시킬 수 있었다. 최적조건하에서 예비열처리를 하여 김치를 제조한 후 냉장고($4{\sim}10^{\circ}C$에서 저장하려면 pH, 환원당, 경도, 펙틴분해효소의 역가 그리고 펙틴물질의 변화를 측정하였다. 처리구의 무우김치는 비교구보다 숙성중 계속해서 높은 경도를 유지하였고 조직내에 있는 PE는 숙성중 계속 감소하였으며 PG는 초기에는 감소하다가 저장 말기에 가서는 증가하였다. 저장중 펙틴물질 조성의 변화는 비교구가 처리구에 비해 열수가용 펙틴질이 더 많이 증가하였으며 Sodium hexa meta phosphate soluble 펙틴은 더 많이 감소하였다.

• 대한환경공학회지
• /
• 제32권9호
• /
• pp.879-886
• /
• 2010

제철소에서 산업부산물로 다량 발생되는 제강전로슬래그를 struvite 정석반응의 정석재로 사용하여 고농도의 질소와 인의 제거특성을 파악하고자 하였다. $NH_4$-N와 $PO_4$-P의 제거 및 회수를 위한 struvite 정석반응의 최적의 pH영역은 8.0~8.75 범위로 확인되었다. pH 8.0~8.75 영역에서 struvite 침전 및 정석반응에 의한 총제거효율은 $NH_4$-N와 $PO_4$-P에 대하여 각각 34.3~61.0%와 91.0~96.2%의 값을 나타냈다. Struvite 정석반응에 의한 $NH_4$-N의 제거는 pH 8.5에서 29.4%의 최대값을 보였고 $PO_4$-P의 경우 pH 8.0에서 65.1%로 최대값을 나타냈다. 수중의 Ca 이온농도가 증가할수록 struvite 정석반응에 의한 $NH_4$-N의 제거효율은 감소하는 경향을 나타냈으며 $PO_4$-P의 경우에는 Ca 이온농도의 변화에 총제거효율이 크게 변하지 않았다. SEM, EDS 및 XRD 분석결과 struvite 정석반응에서 $NH_4$-N과 $PO_4$-P의 제거는 MAP과 HAp 결정이 독립적으로 혹은 정석재의 표면상에 발생함으로써 진행되는 것으로 판단되었다.