• The Korean Journal of Ceramics
• /
• 제3권4호
• /
• pp.235-238
• /
• 1997

Basic properties of new cement pastes based on the system $CaO-Al_2O_3-P_O_5-H_2O$were studied Phosphoric acid solutions and calcium dialuminate clinkers synthesized by the hydration-burning method were used for liquid and powder components of the paste, respectively Variation in the compositions of the paste was achieved by changing the liquid/powder ratio and the concentration of phosphoric acid solution. The hardening rate of the paste was so largely affected by the amount of phosphoric acid that hardening was inhibited with the low-concentrated solution but was explosively accelerated with the high-concentrated solution. The phosphoric acid solutions of concentration of 45~50% and the liquid/powder ratio of 0.5~1.5 were favoured for the high early-strength cement paste with the reasonable hardening rate and high strength. The binding phase of hardened paste was the dense amorphous gel of the system $CaO-Al_2O_3-P_O_5-H_2O$. in which the unreacted calcium dialuminate grains were embeded.

• 한국세라믹학회지
• /
• 제16권3호
• /
• pp.164-168
• /
• 1979

In the previous paper, it was reported that formation of desirable calcium alunimate(CA) in clinker was considerably affected by sulfur-contaminated alumina which was prone to form a disadvantageous mineral, $C_4A_3S$. In this study, however, sulphate-free alumina cement was made from sulfur-free alumina refined from alunite and corresponding materials. The major minerals in the clinker were identified by X-ray diffraction patterns as calcium aluminate (CA), calcium dialuminate $(CA_2)$ and dicalcium alumino silicate $(C_2AS)$. The formation of CA was more effective with decreasing contents of silica to 2 per cent or less and sulfur in the refined alumina. Physical properties of prepared alumina cement such as setting time, stability and compressive strength were measured. The values were similar to those of commercial alumina cements.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권4호
• /
• pp.1-9
• /
• 2020

본 연구는 철근콘크리트 구조물의 염해 내구성 향상의 일환으로써, 보통 포틀랜드 시멘트에 실험체별 다른 비율의 칼슘 알루미네이트 시멘트와 합성 CA₂를 혼입하여 혼입 비율에 따른 염소이온 고정능력을 평가하였다. 침지 후 실험체의 물리·화학적 특성을 압축강도, 공극 구조, 수화물 분석으로 염소이온침투깊이를 EPMA를 통하여 고찰하였다. 클링커 조성에 CA가 34%미만일 경우 실험체의 조밀성이나 강도 발현 양상이 구조재료로서 사용 제한이 없을 것이라고 판단되었으며 CAC와 CA₂를 5:5비율로 혼입하여 실험체에 치환한 실험체가 CAC 혹은 CA₂만 치환한 실험체보다 염소이온 침투억제능력 과 AFm상 및 프리델 염 생성이 높은 것으로 확인할 수 있었다. 결과적으로, 시멘트 페이스트 대비 칼슘 알루미네이트 클링커 치환율이 증가함에 따라 일반적으로 염소이온 고정능력이 향상하였고, CA-CA₂비율에 따라 염소이온 고정 능력 및 염소이온 침투억제 능력에 차이가 있음을 확인할 수 있었다. 실험 범위 내에서 CA-CA₂비율이 39:60이며 시멘트 페이스트 대비 10% 치환한 실험체인 M 10 가 가장 우수한 것으로 나타났다.