• 한국산학기술학회논문지
• /
• 제12권7호
• /
• pp.3327-3333
• /
• 2011

최근 들어 지속적인 폐기물 발생량의 증가와 화석 연료 고갈 문제를 해결하기 위해 폐기물을 이용한 열에너지 회수에 대한 관심이 증가 하고 있다. 여러 가지 신재생 에너지 중 폐기물을 이용하는 방법이 에너지원의 잠재적 가치를 비교하였을 때 가장 유망한 에너지원으로 인정되고 있으며, 그 중에서도 폐기물을 고체연료로 가공하는 고형연료가 현실적이고 가장 경제적인 방법으로 인정받고 있다. 본 연구에는 세지역의 산업단지에서 발생하는 고형연료의 원료가 되는 산업폐기물에 미량 존재하는 중금속 성분을 분석하였으며, Cl+S 함량은 B산업단지의 농도가 A산업단지의 농도보다 약간 높게 나타났다. A-산업단지의 RDF는 모래성분이 많았으며, B-산업단지 RDF는 염화칼륨과 염화나트륨 및 calcium alumina silicates의 성분이 많이 함유된 폐기물로 나타났다. 또한 C-산업단지 RDF는 lime과 calcium alumina silicate 등이 포함된 폐기물임을 알 수 있었다. 이를 바탕으로 산업폐기물의 발생원과 연료로서의 RDF의 성능을 개선하기 위한 기초자료로 활용될 수 있을 것으로 판단된다.

• 대한화학회지
• /
• 제43권2호
• /
• pp.172-181
• /
• 1999

수용성 규산나트륨 빌더를 개발하기 위하여 물유리와 수산화나륨을 적정비율로 혼합한 후 메탄올에 분산시켜 $SiO_2/Na_2O$의 몰 비율이 2.4∼2.8인 무정형 규산나트륨 고체분말을 제조하였다. 이때 규산나트륨의 $SiO_2/Na_2O$의 몰비, 용해도, thermogram, SEM, BET 등을 통하여 그 물리적 특성을 조사하였으며 빌더로서의 기본적인 특성을 규명하기 위해 $SiO_2/Na_2O$의 몰비가 1.0, 2.4, 2.8인 규산나트륨 빌더와 제올라이트를 사용하여 pH 유지능력, 온도에 따른 칼슘이온 결합능, 계면활성제 흡착능 등을 조사하였다. 그 결과 수용성 규산나트륨 화합물이 세제용빌더로서 가져야할 특성인 pH 유지능력 및 용해도에 있어서 제올라이트 보다 우수한 성능을 나타냈으나 칼슘이온 결합능 및 계면활성제 흡착능은 낮게 나타났으며, 규산나트륨의 $SiO_2/Na_2O$의 비율이 증가할수록 pH 유지능력과 이온교환능력은 감소하지만 계면활성제 흡착능력은 다소 증가함을 알 수 있었다.

• 한국세라믹학회지
• /
• 제33권12호
• /
• pp.1331-1338
• /
• 1996

In order to investigate the reaction in the system of fly ash-sulfuric acid-calcium hydroxide the hydrates were produced by the addition of Ca(OH)2 to fly ash activated with sulfuric acid at various temperatures. And then they were characterized by XRD. SEM and TG-DTA. It was found that in the reaction of fly ash with sulfuric acid fly ash was not decomposed but Al2O3 and SiO2 component in it were activated. The addition of calcium hydroxide into this system resulted in the formation of ettringite and calcium silicate hydrate (C-S-H) As the concentration of sulfuric acid and reaction temperature increased the amount of calcium hydroxide decreased fast. At this time gypsum produced by the reaction calcium hydroxide with sulfuric acid was consumed to form ettringite. Accordingly the formation of ettringite increased with calcium hydroxide and reaction time. And it showed faster than the formation of C-S-H.

• Advances in environmental research
• /
• 제2권1호
• /
• pp.35-49
• /
• 2013

Research work on removal of fluoride from water, referred to as water defluoridation, has resulted into the development of a number of technologies over the years but they suffer from either cost or efficiency drawbacks. In this work, enhancement effects of phosphate and silicate on defluoridation of water by low-cost Plaster of Paris (calcined gypsum) were studied. To our knowledge, the influence of silicate on defluoridation was not reported. It was claimed, that the presence of some ions in the treated water samples, was decreasing the fluoride removal since these ions compete the fluoride ions on occupying the available adsorption sites, however, phosphate and silicate ions, from its sodium slats, have enhanced the fluoride % removal, hence, precipitation of calcium-fluoro compounds of these ions can be suggested. Percentage removal of $F^-$ by neat Plaster is 48%, the electrical conductance (EC) curve shows the typical curve of Plaster setting which begins at 20 min and finished at 30 min. The addition of phosphate and silicate ions enhances the removal of fluoride to high extent > 90%. Thermodynamics parameters showed spontaneous fluoride removal by neat Plaster and Plaster-silicate system. The percentage removal with time showed second-order reaction kinetics.

• Computers and Concrete
• /
• 제5권4호
• /
• pp.295-328
• /
• 2008

A previously published multiscale model for early-age cement-based materials [Pichler, et al.2007. "A multiscale micromechanics model for the autogenous-shrinkage deformation of early-age cement-based materials." Engineering Fracture Mechanics, 74, 34-58] is extended towards upscaling of viscoelastic properties. The obtained model links macroscopic behavior, i.e., creep compliance of concrete samples, to the composition of concrete at finer scales and the (supposedly) intrinsic material properties of distinct phases at these scales. Whereas finer-scale composition (and its history) is accessible through recently developed hydration models for the main clinker phases in ordinary Portland cement (OPC), viscous properties of the creep active constituent at finer scales, i.e., calcium-silicate-hydrates (CSH) are identified from macroscopic creep tests using the proposed multiscale model. The proposed multiscale model is assessed by different concrete creep tests reported in the open literature. Moreover, the model prediction is compared to a commonly used macroscopic creep model, the so-called B3 model.

• 한국세라믹학회지
• /
• 제34권5호
• /
• pp.491-499
• /
• 1997

High flexible lightweight composites containing tobermorite as a main mineral is produced using various amorphous silicates, lime, cement and fibers. Here, Mechanical properties of the composites were studied by observing microstructures of hydrates and fibers. Amorphous silicates having better hydraulicity retarded the crystallization of tobermorite due to better formation of C-S-H gel in water bath curing, but, difficult conversion from C-S-H gel to tobermorite in hydrothermal reaction. In the low molar ratio of CaO/SiO2 (0.67), faster crystalization was observed dued to more impurities such as Al2O3 alkali, resulting in improving mechanical properties due to small crystal size and many contact points. It was identified that a lot of calcium silicate hydates formed at surface of pulps increase bonding strength and the crack-resistance of matrix in the composites, but decrease hardness and compressive strength. The choice of amorpous silicates having better hydraulicity, low CaO/SiO2 adding each fibers bellow about 5% in the raw mixs and lower molding pressure should be needed at improve mechanical properties of composites.

• 한국작물학회지
• /
• 제19권
• /
• pp.21-24
• /
• 1975

규소와 석회의 단독 및 병용효과 그리고 이들 상호작용을 보기 위하여 수행한바 결과는 다음과 같다. 1. 최고분얼기의 초장 및 분얼이 규소처리구에서 Control구에 비해 약간 증가를 보였다. 2. 주당수수에서 규소처리구는 약간 감소를 보였지만 수당립수 천립중 등숙율에 있어서는 규소 단독구와 규소+석회구에서 증가를 보였다. 3. 수량은 규소단독처리구가 Controlrn에 비해 15% 석회단독처리구가 13% 그리고 규소석회혼용구에서 22%의 증수를 보였다. 4. 수확한 수도체내 질소함량은 규소와 석회구에서 Control구에 비해 높은 함량을 보였으며 인산함량 적시 규소와 석회구에서 높은 경향을 보였고 가리함량은 경엽이나 수에서 규소와 석회처리구가 Control구에 비해 월등히 낮은 함량을 보였다. 그리고 규소와 석회함량 다같이 규소석회를 사용하므로서 각각 높은 함량을 보였고 특히 석회+규소병용구에서 높은 함량을 나타냈다.

• 한국세라믹학회지
• /
• 제11권4호
• /
• pp.25-30
• /
• 1974

The mixture of quartz powder and slaked lime with plenty water was oscillated in an autoclave and treated hydrothermally under the pressure of 10 kg/$\textrm{cm}^2$ for 8 hours. The main mineral synthesized was confirmed 11$\AA$ tobermorite by the method of X-ray diffraction and selected area electron diffraction. Tobermorite was heat-treated at 40$0^{\circ}C$, 80$0^{\circ}C$ and 100$0^{\circ}C$ for investigation of transformation of morphology and structure. Electron micrographs showed the thin platy structure of synthetic tobermorite with a little of crumpled foil or fibrous semi-crystalline calcium silicate hydrates. No difference in structure was appeared under the temperature of 80$0^{\circ}C$ but tobermorite converted gradually into wollastonite at 800$^{\circ}$~85$0^{\circ}C$. On heating, moulded material from tobermorite hardly shrinks under 80$0^{\circ}C$.

• Restorative Dentistry and Endodontics
• /
• 제44권3호
• /
• pp.30.1-30.6
• /
• 2019

We report the surgical endodontic treatment of a maxillary first premolar with a lateral lesion that originated from an accessory canal. Although lesions originating from accessory canals frequently heal with simple conventional endodontic therapy, some lesions may need additional and different treatment. In the present case, conventional root canal retreatment led to incomplete healing with the need for further treatment (i.e., surgery). Surgical endodontic management with a fast-setting calcium silicate cement was performed on the accessory canal using a dental operating microscope. At the patient's 9-month recall visit, the lesion was resolved upon radiography.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.151-152
• /
• 2020

When concrete is exposed to fire, the thermal decomposition of hydrates of Portland cement paste results in critical damage to the concrete structure of a building. Recently, nanosilica arose as the effective nano-additive which can enhance the thermal resistance of the cementitious materials. However, the mechanism of the enhancement was not elucidated specifically. In this study, we investigated the properties of calcium silicate hydrates(C-S-H)of the nanosilica incorporated cement paste after heating to different heating temperatures (200℃, 500℃, and 800℃) by 29Si nuclear magnetic resonance. The results showed that the polymerization of C-S-H of nanosilica incorporated samples was larger than ordinary cement paste after heating to 200℃, and C-S-H formed during heating process to 500℃ due to the pozzolanic reaction during heating process.