• 한국세라믹학회지
• /
• 제15권4호
• /
• pp.205-212
• /
• 1978

The hydration reaction of the slag-gypsum system was studied by X-ray diffraction, differential thermal analysis, optical icroscopic observation, and measurement of heat liberation of hydration. 1. Domestic granulated slag was almost noncrystalized state, and its mineral compositions calculated were 46.53% of gehlenite, 28.14% of akermanite, and 19.04% of wollastonite. 2. The slag quenched with water at relatively high temperature had better reactivity. 3. The production of ettringite, CSH gel and AH3 gel were stimulated by effect of $Ca(OH)_2$, $Mg(OH)_2$ and calcined dolomite as activators, and the strength of hardened body would be developed by forming compacted microstructure.

• Korean Chemical Engineering Research
• /
• 제57권6호
• /
• pp.812-825
• /
• 2019

국내에서 채광되는 백운석(dolomite, $CaMg(CO_3)_2$)을 회분식 형태의 마이크로웨이브 소성로($950^{\circ}C/60min$)에 의해 소성하여 경소백운석($CaO{\cdot}MgO$)을 제조하였다. 국내에서 산출된 두 개의 백운석 시료를 대상으로 경소백운석($CaO{\cdot}MgO$) 제조 후 수화 특성을 규명한 결과 반응성이 다름을 규명하였다. 경소백운석($CaO{\cdot}MgO$)의 수화 특성의 반응성을 이용하여 강산성 양이온 교환수지와 반응 시켜서 MgO를 분리하는 조건을 실시하였다. 분리 실험 조건은 경소백운석($CaO{\cdot}MgO$)과 $R-SO_3H$ (1:12 mass %)로 칼슘이온 흡착($Ca-(R-SO_3)_2$)하여 MgO를 분리하였다. 분리 후 MgO의 함량은 94 mass % 이상으로 분리되었다. 분리된 MgO를 $950^{\circ}C$, 60 min 동안 열처리 후 MgO의 순도는 96 mass %로 나타났다. 그리고칼슘 이온이 흡착된강산성 양이온교환수지($Ca-(R-SO_3)_2$)와 NaOH, $CO_2$ gas 반응에 의해서 98 mass %의 $CaCO_3$를 합성하였다.

• 한국세라믹학회지
• /
• 제35권6호
• /
• pp.575-582
• /
• 1998

Sutiability of Jungsan clay shale dolomite sludge Anyang feldspar and alumina as raw materials for light-weight porous ceramics was examined. In order to find optimum manufacturing conditions compositions heating temperatuers and heating times were varied and their effects on physical properties were measured and bloating mechanism was investigated. Jungsan clay seems suitable as raw material to make the light-weight constructional materials with 5wt% of ANyang feldspar and alumina added in calcined clay (800$^{\circ}C$) having bulk density of 0.45g/cm3 water absorption of 1.34% and compressive strength of 85kg/cm2 rapid-heated at 1200$^{\circ}C$ for 30min. It is suggested that bloating mechanism depends on the difference of tem-peratures between the inside and outside in specimen the remained gases in interstices can bloat by the li-quid phase of surface with high viscosity and gas pressure at elevated temperature.