• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.42 no.1
• /
• pp.44-53
• /
• 2006

The expansion of near shore aquaculture is feasibility of moving aquaculture facilities into the open ocean. Numerical modeling technique using finite element method was used to enable the optimum design and evaluation of submersible aquaculture cage system. The characteristics of mooring loads response in mooring lines under waves and current and their response amplitude operators were calculated for single and three point mooring configuration at the surface condition and submerged one. The static mooring loads without wave and current loading were similar for both the surface and submerged configuration. It was calculated that three point mooring was more adequate than single point mooring for the mooring configuration of submersible aquaculture cage system. The wave induced response amplitude operators for the single point mooring configuration with the influence of currents were identical to those without the influence of currents.

• Journal of Wind Energy
• /
• v.15 no.1
• /
• pp.30-42
• /
• 2024

This paper examines the design feasibility of cage aquaculture coexistent with an offshore wind farm in the southwestern sea of South Korea. Among the many types of fish farms, 2 × 3 cage aquaculture was selected for the investigation and the initial design including mooring lines, bridles, etc. was drawn with iterative numerical simulations using Orcaflex. Experimental campaigns were conducted to validate the numerical results, and they were found to be in good agreement with the experiments. Using a validated numerical model, the tension of mooring lines and the deformed volumes of the facility were examined under given operating and survival conditions. The validated model will be further used to investigate various aspects of the cage farm design for design optimization.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.1
• /
• pp.40-50
• /
• 2012

This study aims to analyze the performance of a submersible fish cage which was designed for developing an economical cage system can be applied in korean aquaculture environment easily. To analyze the performance of the designed cage a model test was carried out. In the test, inclination changes of the upper frame and mooring tensions of model cage were measured during the submerging and surfacing motion in still water and wave condition (period: 2s, wave height: 0.1, 0.2, 0.3m). As a result, in the still water condition the model cage kept horizontal balance and inclination degree of the upper frame was about $1^{\circ}$. In the wave condition, the model cage showed bilateral symmetric up-and-down motion but the average inclination degree of the upper frame was about $0^{\circ}$. When the model cage reached at a depth of 1m, the up-and-down motion of the cage was decreased by 12% compared with that of at the surface (period 2s, height 0.3m). In the same wave condition, the maximum and average line tension under the bottom position were about 8% and 11% respectively compared with that of at surface.

• The Journal of Fisheries Business Administration
• /
• v.52 no.3
• /
• pp.27-38
• /
• 2021

This study is aimed to figure out the productivity and variability of cage-aquaculture changes. According to the analysis, the productivity of major fish species has been increasing, except mullet. Although the regional productivity has decreased in the last two years, it has been on the rise considering as a whole. Gyeongsangnam-do showed the highest level of productivity by region. Productivity by species was also higher than other regions in the cases of rock fish, mullet and sea bream followed by productivity of Chungcheongnam-do. The production of marine cage-culture in Jeollanam-do is the second largest in Korea in value/weight while its productivity is lower than that of Chungcheongnam-do. When it comes to comparison by region, Gyeongsangnam-do shows the lowest productivity variation. And Jeollanam-do shows the second-lowest variation in productivity that is only about half of that of Chungcheongnam-do province. Thus, it is found that Jeollanam-do region has an advantage in management stability while its productivity is low. On the other hand, productivity by species was also analyzed. Gyeongsangnam-do has the highest productivity by species for rock fish, mullet and sea bream whereas rock bream productivity is the highest in Jeollanam-do. Therefore, it probably needs to reflect these results when choosing regional-focused incubation fish species.

• The Journal of Fisheries Business Administration
• /
• v.46 no.2
• /
• pp.13-29
• /
• 2015

The abalone aquaculture has been very rapidly developed in Korea. Annual production quantity was less 200 tons before 2000th, it have been increased to over 9,000 tons in 2014. Also Abalone export amounts have been over 20 million dollars. The reason of rapid growth of Abalone aquaculture in Korea is due to high level profit ratio. Then now many fishing officers and other aquaculture fishers want to participate with abalone aquaculture newly. However Recent Abalone aquaculture in Korea is faced some problems. Aspects of production environmental status of fishing grounds are more aggravate, and then abalone aquaculture is exposed to various disease, and death rate of young abalone is higher. And aspect of management, the aquaculture cost is more increase. The demand of abalone also is depressing recently, this cause to come down the production price. In this viewpoint, Management analysis of abalone aquaculture in Korea is helpful for decision making of general aquaculture fisher want to participate newly. The analysis is practiced two aspects. One is index analysis, and the other is Break-even-point(BEP) analysis. The result of index analysis, average net profit rate has shown 28.0%, however the Regional difference has excessive. That is, Wando(major) has shown 39.4%, and Haenam province has shown 14.2%. On the other hand, the more scale has shown higher profit rate by aquaculture scale. And the result of BEP analysis, average has shown 93 cage number per abalone aquaculture household, and Wando(major) has shown 56 cage number, Haenam province has shown 131 cage number. The lower production abalone price of recent means higher BEP level.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.1
• /
• pp.63-69
• /
• 2011

In this paper, the wave forces on a cylindrical aquaculture fish cage, which consists of the porous mesh with the uniform porosity, are analyzed using matched eigenfunction expansion method. The boundary condition on the porous net is derived based on the Darcy's law, which implies that the velocity of the fluid passing through the net is linearly proportional to the pressure difference between two sides of the net. The wave forces and wave responses are investigated by changing the porous parameter of porous net as well as the submerged position (floating type, bottom-mounted type) of an aquaculture fish cage. It is found that the wave forces on a bottom-mounted type are largely decreased compared with that on a floating type. Also, the porosity of the netting structure plays an important role in reducing the wave forces and the wave elevation in the vicinity of an aquaculture fish cage.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.60 no.2
• /
• pp.186-193
• /
• 2024

Most fishing nets used in fish cage aquaculture are made of synthetic fibers such as polyamide (PA) and polyethylene (PE). Therefore, it is challenging to maintain the internal volume of the fish cage due to biofouling, which can increase the load on the cage or reduce dissolved oxygen levels by impeding smooth current flow. To address this issue, research has been conducted to replace conventional synthetic fiber cage nets with brass nets, demonstrating certain benefits such as improved productivity and ease of fish cage management. However, given the need for a more thorough examination of brass fishing net weaving technology and performance, this study assessed the optimal weaving method for brass fishing nets to be used in fish cages. Additionally, it provided essential data for the practical application of brass fishing nets by evaluating their weight, tensile strength, elongation, fatigue resistance, and wear resistance. The study concluded that weaving brass fishing nets using the chain link method ensures durability, ease of installation, and compact storage in a scroll-like form. Moreover, due to their superior fatigue and wear resistance properties, brass nets can offer increased utility if appropriate net diameter and length are selected to compensate for their higher weight per unit area and relatively higher cost compared to existing fiber fishing nets.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.55 no.5
• /
• pp.598-611
• /
• 2022

The aim of this study was to investigate the range of influence of aquaculture activities in fish cage farms located on the southern coast of Korea (Farm A and B in Hadong, Farm C in Tongyoung, and Farm D in Geoje) by analyzing the distribution and characteristics of polychaete communities. Farm A and B showed remarkably high aquaculture intensity, and as a result, the polychaete communities near the farms were heavily polluted. However, there was a difference in the polychaete communities at a distance greater than 30 m from farm A and B, which may be due to topographical differences. The effect of the aquaculture activity of Farm C was only observed below the farm, however, the influence of aquaculture activities Farm D was maintained over a relatively long distance. According to the results of this study, the effect of the fish cage culture was mainly influenced by factors related to the production of fish, such as the stocking amount and the amount of food supply. Moreover, the distance at which the influence of aquaculture activity was observed was found to be closely related to the topographical characteristics and flow velocity around the farms.

• Korean Journal of Ichthyology
• /
• v.29 no.1
• /
• pp.41-51
• /
• 2017

To understand the application in farm for the fish aquaculture, we investigated biological and pathological traits on red sea bream Pagrus major which were reared in each copper-alloy net cage and the synthetic fiber net cage for 9 months. Two groups of cage were made and set in Yokji-eup, Tongyoung, Gyeongsangnam-do in size of 25 m in diameter and 10 m of depth. Survival rate of the red sea bream in the rearing copper-alloy net cage and synthetic fiber cage showed 99.75% and 99.70% respectively, there was no significant difference. Daily weight growth rate in each net was shown to 2.13 g/day and 1.65 g/day. Health analysis by blood composition analysis showed a favorable result in the copper-alloy net cage rather than in the synthetic fiber net. Bioaccumulation of heavy metal such as Cu and Zn especially in gonad was higher than other organ. Bioaccumulation of Cu and Zn in the muscle was lower compared to the permitted standard for food safety. Pathogenic infection test discovered Microcotyle tai for parasite, V. alginolyticus and other five species for bacteria. But there was a little bit difference of bacteria infection in copper-alloy net cage and copper-alloy net cage is expected to be has antibacterial effect. Thus, copper-alloy net cage can be applied to farm considering its system stability, recycling, antibiosis and food safety.

• The Korean Journal of Malacology
• /
• v.30 no.1
• /
• pp.9-15
• /
• 2014

This study is aimed at figuring out the reasons of the mass mortality of abalone and the increase in its mortality rate in the sea cage. The study suggests that lack seawater circulation in an abalone aquaculture cage is an important culprit for it. We analyzed the current distribution around a 1/20 scaled-down abalone unit cage of 4 rows and 10 columns by fluid flow visualization technique (PIV : Particle Image Velocimetry). The speed of current in the model cage definitely slowed down in the first column of a unit cage. We also observed currents going down to the bottom of a water tank from the unit cages placed in the middle. The speed of wakes behind inside the row in the middle was slower than that outside the row. Water velocity inside and outside a real abalone cage at Nowha Island adjacent to Wan Island was measured to verify results from the tank test. The speed of current in front of the cage by 2 m was 0.11 m/sec while it was only 0.0009 m/sec inside the cage. It had similar findings with those of a tank test.