• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.42 no.1
• /
• pp.44-53
• /
• 2006

The expansion of near shore aquaculture is feasibility of moving aquaculture facilities into the open ocean. Numerical modeling technique using finite element method was used to enable the optimum design and evaluation of submersible aquaculture cage system. The characteristics of mooring loads response in mooring lines under waves and current and their response amplitude operators were calculated for single and three point mooring configuration at the surface condition and submerged one. The static mooring loads without wave and current loading were similar for both the surface and submerged configuration. It was calculated that three point mooring was more adequate than single point mooring for the mooring configuration of submersible aquaculture cage system. The wave induced response amplitude operators for the single point mooring configuration with the influence of currents were identical to those without the influence of currents.

• Journal of the Korea Convergence Society
• /
• v.10 no.9
• /
• pp.127-132
• /
• 2019

This study is an example of the registration of intellectual property rights by applying capstone design to airline service. To relieve the inconvenience of the 'Paper Cage' that is on sale in the airlines, the team create 'Foldable Inflight Pet Cage' for the convenience of passengers accompanying their pets. This allowed not only pets but also passengers on board to make comfortable and safe air travel. Through collaboration with aviation experts and pet cages production experts, the team produced foldable cages that were not previously available. For verification of products, preliminary survey was conducted to enable the commercialization of foldable cage. The project period was 15 weeks, and the participants consisted of 18 students, 1 professor, and 4 industry experts. This study shows Capstone Design can also be applied in airline service and be a valuable research on the necessity of industry-academic links and practical-oriented education.

• Journal of Korea Trade
• /
• v.25 no.4
• /
• pp.60-87
• /
• 2021

Purpose - This study examines the role of e-commerce resulting from technological innovation as a new approach toward internationalization. We study the relationship between e-commerce export and country distance, measured in CAGE distance, which has hindered traditional internationalization. As a control variable, entrepreneurship was introduced to check the moderating effect on the relationship between country distance and e-commerce export. Design/methodology - Based on empirical analysis, e-commerce exports from the Republic of Korea to 96 countries were used as dependent variables. First, hierarchical regression analysis was conducted to test the hypothesis about each country's distance, measured by CAGE distance, and each dimension of CAGE, on e-commerce exports. Next, the hypothesis was tested through the interaction term to examine the moderating effect of entrepreneurship. Findings - The analysis showed that the hypothesis, which postulated e-commerce exports as affected negatively by the country's distance, was supported but not that all CAGE dimensions affected it. Specifically, geographical distance and economic distance have negative effects, but cultural distance and administrative distance did not affect e-commerce exports. Thus, in contrast to the expectation that distance restrictions in e-commerce would not exist, this study confirmed that distance still matters to internationalization and that entrepreneurship can mitigate the adverse effects. Originality/value - Through these results, when export firms try to enter new markets and start internationalization through e-commerce, the entrepreneurship of the importing country should be considered.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.1
• /
• pp.45-51
• /
• 2001

In order to investigate the optimal design weight of sinkers for preventing cage net from deforming in current, the model experiment on 2 types of square cage nets with different S sub(n)/S, the ratio of total area of netting projected to the perpendicular to the water flow S sub(n) to wall area of netting S, and 4 kinds of sinkers was carried out in circulation water channel. The model cage nets were made in 1/10 scale and the total weight in water of 4 sinkers attached to each corner of their bottom frames was 18, 54, 90, and 126g, respectively equivalent to 0.1, 0.3, 0.5, and 0.7 kg per unit area of prototype net. The results obtained can be summarizes as follows; Due to the deformation of each net where it was lifted towards the surface in severe conditions, its volume was reduced. This depended highly on the weight of sinkers placed in the bottom corner of cage nets, even if the variation of S sub(n)/S had a little effect on their deformation in current less than 0.4 m/s. In addition, it was observed that the total weight of sinkers for preventing the net from deforming to the extent of less than 50% inside its initial volume was 31 to 245 kg in the range of 0.3 to 0.6 m/s and the adequate design weight of sinker was approximately 0.5 kg per its unit area.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.184-189
• /
• 2014

This paper presents a multi-objective optimization approach to design rotor slot geometry of three-phase squirrel cage induction machine to achieve NEMA design D torque-speed (T-S) characteristics with high efficiency. The multi-objective Particle Swarm Optimization (MOPSO) algorithm combined with the adaptive response surface method and Latin hypercube sampling strategy is applied to obtain the Pareto optimal designs. In order to demonstrate the validity of the suggested optimal algorithm, an application to rotor slot design of three-phase induction motor is presented.

• Journal of Korean Neurosurgical Society
• /
• v.41 no.2
• /
• pp.111-117
• /
• 2007

Objective : The objective of this study was to validate the effects of a titanium mesh cage and dynamic plating in anterior cervical stabilization after corpectomy. Methods : A retrospective study was performed on 31 consecutive patients, who underwent anterior cervical reconstruction with a titanium mesh cage and dynamic plating, from March 2004 to February 2006. Twenty-four patients had 1-level and 7 had 2-level corpectomies. Ten patients underwent surgery with a cage of 10-mm diameter and 21 with 13-mm diameter. Neurological status and outcomes were assessed according to Odom's criteria. Sagittal angle, coronal angle, settling ratio, sagittal displacement, and cervical lordosis were used to evaluate the radiological outcomes. Results : In overall, 26 [83.9%] of 31 showed excellent or good outcomes. Thirteen percent [4 cases] of the patients developed surgical complications, such as hoarseness, transient dysphagia, or nerve root palsy. Seven [22.6%] patients had reconstruction failure:5 [20.8%] in the 1-level corpectomy group and 2 [28.5%] in the 2-level corpectomy group. Revisions were required in 2 patients with plate pullout due to significant instability. However, none of 5 patients who demonstrated cage displacement or screw pullout, underwent a revision. Radiographs revealed bony consolidation in 96.3% of the patients, including 6 patients with implantation failure during the follow-up period. Conclusion : Based on our preliminary results, the titanium mesh cage and dynamic plating was effective for cervical reconstruction after corpectomy. The anterior cervical reconstruction performed with dynamic plates is considered to reduce stress shielding and greater graft compression that is afforded by the unique plate design.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.2
• /
• pp.83-93
• /
• 2020

In fisheries, the importance of designing efficient fish cages is being emphasized as aquaculture has become more production than capture fishing. Particularly, the gravity cage system is one of the popular fish cage system in Korea. Currently, gravity cages of various shapes and sizes are being widely designed and installed in offshore and inland seas. The cage is subject to external forces, such as currents and waves, and the shape of the structure and tension on the ropes changes according to these external forces. Thus, it is important to accurately calculate these dynamic behavior, including the external forces and tension on the structure during the design stage. In this study, three types of cage systems with an equal internal volume of 8000 ㎥ were analyzed using mass-spring models and their behavior was interpreted through simulations. These simulations were used to analyze the behavior and tension of the ropes in response to currents and waves to aid in the selection of individual cage sizes for a given total volume. The numerical calculation results indicate that depending on the flow rate, the most resistant system is System 1, which has eight strays, and System 2 and System 3 have 69.4% and 54.8% of the resistance of System 1. Further, total resistance increased as the number of cages increased for all flow rates.

• Journal of Biomedical Engineering Research
• /
• v.38 no.1
• /
• pp.9-15
• /
• 2017

Recently, flexible cages have been introduced in an attempt to absorb and reduce the abnormal load transfer along the anterior parts of the spine. They are designed to be used with the pedicle screw systems to allow some mobility at the index level while containing ROM at the adjacent level. In this study, a finite element (FE) study was performed to assess biomechanical efficacies of the flexible cage when combined with pedicle screws with flexible rods. The post-operated models were constructed by modifying the L4-5 of a previously-validated 3-D FE model of the intact lumbar spine (L2-S1): (1) Type 1, flexible cage only; (2) Type 2, pedicle screws with flexible rods; (3) Type 3, interbody fusion cage plus pedicle screws with rigid rods; (4) Type 4, interbody fusion cage plus Type 2; (5) Type 5, Type 1 plus Type 2. Flexion/extension of 10 Nm with a compressive follower load of 400N was applied. As compared to the Type 3 (62~65%) and Type 4 (59~62%), Type 5 (53~55%) was able to limit the motion at the operated level effectively, despite moderate reduction at the adjacent level. It was also able to shift the load back to the anterior portions of the spine thus relieving excessively high posterior load transfer and to reduce stress on the endplate by absorbing the load with its flexible shape design features. The likelihood of component failure of flexble cage remained less than 30% regardless of loading conditions when combined with pedicle screws with flexible rods. Our study demonstrated that flexible cages when combined with posterior dynamic system may help reduce subsidence of cage and degeneration process at the adjacent levels while effectively providing stability at the operated level.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.11
• /
• pp.943-950
• /
• 2016

The purpose of this study was to evaluate and compare by finite element analysis the biomechanical performance, in terms of cervical stand-alone cage screw insert angle (Type 3 - 5: 2 Screws) and screw arrangement (Type 6 and 7: 3 Screws / Type 8 and 9: 4 Screws), and the range of motion (ROM) of traditional anterior cervical discectomy of a fusion device (Type 1: Cage / Type 2: Cage + ACP). Our study suggests that the biomechanical behavior of a postoperative cervical spine could indeed be influenced by design features, such as screw angle and number of screws. In particular, ROM and the risk of subsidence were more sensitive during extension about type 5 (Insert Angle $20^{\circ}$). Our study also suggested that the number of screw asymmetries between up and down for type 6 and 7 could result in differences in the risk of screw fracture manifesting in different clinical aspects.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.6
• /
• pp.661-665
• /
• 2001

This paper deals with optimal mooring system to secure fish cage in a desired location, Through field investigation and paper works, we surveyed disasters by breakdown of cage frame and mooring system due to higher wave attack and selected compliant buoy mooring method for shallow water mooring system against severe coastal external forces. To analyze interaction between external forces and compliant buoy mooring system, theoretical model has developed as quasi-static nonlinear analysis. After verifying the feasibility of the numerical model compared with experiment, static analysis has tried for various mooring systems with different angle of array, number of mooring points, length of horizontal and inclined rope. Optimal mooring method using compliant buoy has selected for fish cage through numerical simulation. This results can apply for preliminary design for cage mooring system.