• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.299-301
• /
• 1998

The torque characteristic of an induction motor is affected greatly by the slot shape at which the conductors of the rotor are located. In this paper, the three analysis model; general type, deep slot type, double squirrel-cage type, of which the slot shapes are different, were analyzed by FEM at no load, at rated load, and at standstill respectively. The flux distribution and air-gap flux density were also obtained. From the above result, it was confirmed that the analysis models of deep slot and double squirrel-cage had more desirable characteristics than those of general squirrel-cage.

• Journal of the Korean Magnetic Resonance Society
• /
• v.26 no.4
• /
• pp.40-45
• /
• 2022

A small cage-like molecule (2) composed of three aminomethyl pyrroles and two hexa-substituted benzenes has been prepared by reduction of its iminopyrrole analogue (1) using NaBH₄. It was revealed by ¹H NMR spectroscopic analyses that cage molecule 2 strongly binds the fluoride anion in polar DMSO-d₆ relative to CDCl₃. Compared to that of compound 1, the lowered affinity of 2 for the fluoride anion is attributable to its increased electron density resulting from the production of thesecondary amine groups.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.277-280
• /
• 2011

We studied the relative stability and atomic structure of five $C_{20}^{2+}$ isomers obtained by two-electron ionization of a $C_{20}$ cage (the smallest fullerene). All the isomers are bond-stretch isomers, i.e., they differ in bond length. In particular, in one of the isomers with Ih symmetry, all the bond lengths are equal. Full geometry optimizations of the dipositive ion $C_{20}^{2+}$ were performed using the hybrid density functional (B3LYP/6-31G(d)) methods. All isomers were found to be true minima by frequency analysis at the level of B3LYP/6-31G(d) under the reinforced tight convergence criterion and a pruned (99,590) grid. The zero-point correction energy for the cage bond-stretch isomers was in the increasing order $D_{2h}<C_{2h}<C_2<T_h<I_h$ of $C_{20}^{2+}$. The energy difference among the isomers of cage dipositive ions was less than that among neutral cage isomers. Our results suggest that these isomers show bond-stretch isomerism and that they have an identical spin state and an identical potential energy curve. Although the predominant electronic configurations of the isomers are similar, the frontier orbital characteristics are different, implying that we could anticipate an entirely different set of characteristic chemical reactions for each type of HOMO and LUMO.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.2
• /
• pp.69-72
• /
• 2012

In this study, deposition of low-dielectric constant SiOC(H) films by conventional plasma-enhanced chemical vapor deposition (PECVD) were investigated through various characterization techniques. The results show that, with an increase in the plasma power density, the relative dielectric constant (k) of the deposited films decreases whereas the refractive index increases. This is mainly due to the incorporation of organic molecules with $CH_3$ group into the Si-O-Si cage structure. It is as confirmed by FT-IR measurements in which the absorption peak at 1,129 $cm^{-1}$ corresponding to Si-O-Si cage structure increases with power plasma density. Electrical characterization reveals that even after fast thermal annealing process, the leakage current density of the deposited films is in the order of $10^{-11}$ A/cm at 1.5 MV/cm. The reliability of the SiOC(H) film is also further characterized by using BTS test.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.6
• /
• pp.469-477
• /
• 2004

This study examined distributional patterns of Asterias amurensis in Tongyeong, the central South Sea of Korea. The density of the sea star was estimated at 10 chosen sites in the inner and the outer parts of the Tongyeong coast from December 2000. The mean density of the species in this area was $2.4ind./m^{2}$. The seasonal surveys conducted at 3 arbitrary chosen sites (i.e., sea cage, reef and soft sediment) also showed that the abundance of the species at the sea cage site $(density:\;3.6\;ind./m^{2};\;biomass:\;250.7\;gwwt/m^{2})$ was significantly higher than at the reef site $(density:\;1.7\;ind./m^{2};\;biomass:\;63.5\;gwwt/m^{2})$ and the soft sediment site $(density:\;0.4\;ind./m^{2};\;biomass:\;18.9\;gwwt/m^{2})$. Densities were higher at sea cages areas than at reefs and soft bottom sites. At sea cage site, A. amurensis population exhibited a strong aggregated distributional pattern. In contrast, at reef and soft bottom sites, A. amurensis population showed a random distributional pattern. The spatial difference in prey species and its abundance was the primary factor determining the spatial heterogeneity of the sea star in its behavior characteristics. Experiments on the feeding preference indicated that A. amurensis had a strong selectivity on its prey, but this selectivity varied between populations living in different sites. In particular, A. amurensis populations at the reef site showed a strong selectivity on various sessile and mobile animals living in reef areas, suggesting that these animal groups may play a role as "windows for the survival of A. amurensis". These results suggest that the distribution of A. amurensis in Tongyeong is closely associated with abundance of prey species and the bottom composition.

• Journal of Biomedical Engineering Research
• /
• v.21 no.3 s.61
• /
• pp.295-301
• /
• 2000

It is known that among many factors, relative micromotion at bone/implant interfaces can hinder bone ingrowth into surface pores of an implant. Loading conditions, mechanical properties of spinal materials, friction coefficients at the interfaces and geometry of spinal segments would affect the relative micromotion and spinal stability. A finite clement model of the human lumbar spine segments (L4-L5) was constructed to investigate the mechanical sensitivity at the interfaces between bone and cage. Relative micromotion. Posterior axial displacement. bone stress, cage stress and friction force were predicted in changes of friction coefficients, loading conditions. bone density and age-related material/geometric properties of the spinal segments. Relative micromotion (slip distance in a static loading means relative micromotion in routine activity) at the interfaces increased significantly as the mechanical properties of cancellous bone, annulus fibers or/and ligaments decrease or/and as the friction coefficient at the interfaces decreases. The contact normal force at the interfaces decreased as cancellous bone density decreases or/and as the friction coefficient increases A significant increase of slip distance at anterior annulus occurred with an addition of torsion to compressive preload. Relative micromotion decreased with an increase of disc area. In conclusion. relative micromotion, stress response. Posterior axial displacement and contact normal force are sensitive to the friction coefficient of the interfaces, bone density, loading conditions and age-related geometric/material changes.

• Ocean and Polar Research
• /
• v.23 no.3
• /
• pp.279-284
• /
• 2001

The natural high productivity of temperate coastal waters in Korea can be used in advantage to reduce the feed costs for the cage-cultured marine carnivorous fish species. By using the night-lights methods an alternative of supplementary feeding strategy can be offered to the cage farmers and maintain sound environmental conditions that could enhance maximum sustainable yields. The aim of this study was to investigate the effects of night-lights which shown positive results on feeding and growth in sea cage cultured rockfish, Sebastes schlegeli. The study showed that for the water around overhead illuminated sea cage, higher zooplankton density was observed at night than during the daytime. Increased amounts of for-age, evidenced by stomach content analyses were observed in the early evening, but decreased amounts were observed in the morning and afternoon. That is, feeding activities of the fish were most intensive from midnight to dawn. In a three month feeding experiment, the results showed that night-lighted groups were superior to groups with the highest feeding efficient. This study suggested that the evidence that night-lights superimposed on only day-lights enhance growth of rockfish in sea cages during summer and winter, with timing of exposure affecting growth of juvenile fish. The capability to control the feeding behavior of marine life via manipulation and external stimuli could considerably benefit the advancement of sea cage aquaculture in coastal areas.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.10
• /
• pp.3338-3342
• /
• 2012

Covalent functionalization of a $B_{12}N_{12}$ nano-cage with $CO_2$ molecule has been investigated using density functional theory in terms of energetic, geometric, and electronic property analyses. Results show that besides two physisorption configurations, $CO_2$ preferably tends to perform [2+2] addition on B-N bonds of the cluster which are shared between six-membered and four-membered rings, releasing energy of 14.99 kcal/mol for adsorption of the first $CO_2$ and of 15.45 kcal/mol for the second one (per each molecule). On the basis of calculated density of states, we have found that the electronic properties of the physisorbed $B_{12}N_{12}$ by $CO_2$ have not changed, while slight changes have been predicted in the functionalized cases. Present results might be helpful to provide an effective way to modify the $B_{12}N_{12}$ properties for further purifications and applications.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.4
• /
• pp.287-294
• /
• 2004

Effect of growth and survival rate on different densities in the cage culture of juvenile abalone (Haliotis discus hannai) were determined in Myoduri Yeosu, Jeollanamdo from April 2000 to April 2001. The shell length growth was conducted using $32.35{\pm}1.35$ mm abalone juveniles for 374 days at densities $15{\%}\;(230\;indv./m^{2}),\;30{\%}\;(460\;indv./m^{2}),\;45{\%}\;(690 \;indv./m^{2}),\;60{\%}\;(920\;indv./m^{2})$. The result showed that the hightest growth rate was observed in lowest $(15{\%})$ density experimental group. Survival rate of Juvenile abalone was the highest in $15{\%}$\; density group and lowest in $45{\%}$ density group and distribution rate of shell length showed the highest as $30{\%}\;in\;230\;indv./m^{2}\;(15{\%})$ group.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.44-48
• /
• 1994

The cutting process of cage motor rotor require high precision and good roughness. The surface roughness of cutting face is very important factor with effect on the magnetic flux density of cage motor rotor. The paper describes a cause of decrease in the cutting force and roughness on low temperature cooling tool by means of analysis on the mechanism of force system at cutting confition and experimental findings. The main results as compared with the room temperature cutting are as follow : 1) The cutting resistance decreased due to low temperature cooling tool. 2) The surface roughness decreased due to low temperature cooling tool.