• Journal of the Korean Society for Heat Treatment
• /
• v.33 no.6
• /
• pp.290-295
• /
• 2020

In this study, Electro spinning was carried out using Cabon nanotube 0.1%-Polyacrylonitrile 3%-Dimethylformamide 17% agitation solution. It was investigated the solute and solvent correlations according to the electro spinning voltages ranging form 5 to 40 kV, based on the SEM image. Except voltage 25 kV, electro spinning was failed due to the lack of electro spinning (less than 60%). Voltage 25 kV was showed excellent properties, and was confirmed Cabon nanotube 58.1 nm and diameter of Cabon nanotube + Polyacrylonitrile 1.76 ㎛ as shown SEM image. Also, the tensile test results were showed that SK Chemical prepreg electro spinning angle of 0 and 90 degrees were 137 MPa and 60 MPa, respectively.

• Journal of the Korean Chemical Society
• /
• v.49 no.6
• /
• pp.517-520
• /
• 2005

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.103-106
• /
• 2000

The electronic properties of carbon nanotube are currently the focus of considerable interest. In this paper, the electronic properties of finite length effect in carbon nanotube for cabon nanoscale device is presented. To calculate the electronic properties of carbon nanotube, Empirical potential method (Brenner' hydrocarbon potential) for carbon and Tight binding molecular dynamic (TBMD) simulation are used. As a result of study, we have known that the value of the band gap decreases with increasing the length of the tube. The energy band gap of (6, 6) armchair carbon nanotube have the ranges between 0.3 eV and 2.5 eV. Also, our results were compared with the results of the other computational techniques. As that result, our results are very well united.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.503-504
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.491-492
• /
• 2011

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.265-266
• /
• 2010

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1908-1912
• /
• 2008

Conductive polymers, prepared by mixing electrically conductive fillers with a suitable polymeric formulation, are widely used in applications such as interconnecting materials for high density electronic packaging. However, resins of conductive pastes used as binders and vehicles are generally nonconductive, so that they may prevent the electrical contact between conductive fillers and reduce electron transmission. In this study, we improved conductivity of silver paste by the incorporation of cabon nanotubes. It is important to achieve homogeneous dispersion of CNTs to act as reinforcements efficiently in matrix. We carried out acid treatment on nanotubes for their homogeneous dispersion in silver/conducting polymer matrix. The dispersion states of nanotubes were characterized by raman spectra and filed emission scanning electron microscope. The electrical resistivity of CNTs incorporated silver paste was also measured by 4-point probe method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.270-274
• /
• 2003

네트워크상태의 탄소나노튜브 나노선과 바나듐 옥사이드 나노선의 전압-전류 특성을 측정하고 옴성 전압전류특성과 함께 정류 다이오드 특성을 관측하였다 정류특성을 Schottky diode 관점에서 분석하였고 나노선을 이용한 다이오드의 이상지수가 10을 초과하는 큰 값을 가짐을 알았다. 2단자 전극상태에서 전류잡음 1/f 잡음형태가 관측되었다.