• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 전기설비
• /
• pp.78-80
• /
• 2006

전력계통망 및 수용가는 다양한 형태의 전력케이블 및 전력선이 연계된 분 배전망을 형성하고 있다. 특히, 이렇게 구성된 분 배전망은 하나의 전력계통으로서 연계된 전력망을 형성하고 있으며, 이를 전력선통신의 인프라로 활용할 수 있다. 최근 들어, 전력선통신 기술에 대한 연구가 활발히 진행되고 있으며, 계통에 연계된 부하와 분기선로 그리고 매질의 특성에 따라 통신환경이 달라진다. 특히 전송 주파수에 따른 신호의 감쇠, 연계된 부하의 종류와 이들 부하로 인한 잡음원의 유입 및 전송신호의 왜곡 등이 주요한 채널환경 요소이다. 본 논문에서는 상기 나열한 한계점을 극복하기 위한 대안으로 전력선 및 케이블의 매질특성을 평가하고, 이에 따른 전송신호의 영향을 분석, 연계된 다양한 부하들의 변동에 따른 통신환경의 변화 영향 그리고 통신성능에 미치는 영향을 분석하였으며, 또한 전력 케이블 및 선로의 특성과 부하변동 특성을 반영하여 구내용 전력케이블 기반의 UWB(Ultra Wide Band) 통신용 채널 환경을 모델링하는 방안을 제안하고자 한다.

• 한국연초학회지
• /
• 제17권1호
• /
• pp.5-14
• /
• 1995

Efficient algorithms for the automatic classification of flue-cured tovacco ripeness and grading have been developed The ripeness of the tobacco was classified into 4 levels vased on the color. The lab-built simple RGB color measuring system was utilized for detecting the light reflectance of the tobacco leaves. The measured data were used far training the artificial neural network The performance of the trained network was also tested far the untrained samples. The spectrophotometer was used to detect the light reflectance and absorption of the graded tobacco leaves in the frequency ranges of the visible light The measured data and the statistical analysis was performed to investigate the light characteristics of the graded samples. The measured data were obtained from samples of 5 different grades directly without considering the leaf positions. Those data were used far training the artificial neural network The performance of the trained network was also tested far the untrained samples. The neural network based sensor information processing showed successful results for grading of tobacco leaves.

• 한국콘텐츠학회논문지
• /
• 제3권2호
• /
• pp.78-86
• /
• 2003

이동통신이 대중화되면서 서비스확장을 위해 무분별하게 기지국 건설함으로써 발생하는 기지국간의 중복투자 및 자연훼손을 방지하기 위하여 정통부에서는 기지국 공용화를 요구하였다. 본 연구에서는 수도권 지하철 역사내에 설치된 공용중계기에서 발생되는 전원 불량 등의 장애요인 및 장비, 시설 불량 또는 지하철 터널 구간에서 발생되는 통신 서비스에 대한 문제점을 조사하여 분석하였다. 본 논문의 내용은 공용화 서비스에서 놓은 품질의 서비스를 제공하고 앞으로 추진될 IMT-2000 또는 제4세대 이동통신 공용화에 중요한 기초자료가 될 것이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1131-1134
• /
• 2003

이 논문은 현재 국내에서 사용하고 있는 배전용 케이블 열화진단장치인 완화전류 측정장치의 진단기준 개선을 위한 것이다. 현재까지 사용되던 직류 고전압을 이용한 누설전류 측정법을 대체하기 위해 사용되는 완화전류 측정장치는 국내 배전선로에서 수년간 현장적용을 실시하여 많은 케이블을 교체하였다. 하지만 완화전류 측정을 통해 교체한 케이블의 상태에 대해서는 검증되지 않은 상태이므로 완화전류 측정을 통한 교체기준이 국내 케이블에 적절한지 확인할 필요가 있다. 이는 케이블 유지보수에 있어서 중요한 사항으로서 교체기준이 부적절할 경우 열화진단을 통한 고장방지 목적을 달성할 수 없거나 건전한 케이블을 교체하여 불필요한 예산을 낭비하는 원인이 된다. 본 논문에서는 현장운전중인 선로를 선택하고 열화된 케이블의 절연성능 향상을 위해 실리콘을 주입하였다. 그리고 실리콘 처리후 케이블의 운전시간에 따른 열화진단 결과와 케이블 절연파괴강도를 비교하여 진단장치의 신뢰성을 검증하고자 하였다. 이것은 1년 동안의 현장시험 결과를 정리한 것이다.

• 한국기계가공학회지
• /
• 제18권11호
• /
• pp.109-114
• /
• 2019

Hydraulic pumps are widely used in fields such as machinery manufacturing, engineering and construction. Although the research on hydraulic engineering is mature, it is still necessary to examine various performance aspects in detail for specific applications. This paper will focus on the hydraulic pump used in special construction machinery that needs high temperature and high pressure resistance. It will analyze the theoretical design, structure and thermal characteristics of the pump system using the Fundamentals of Engineering (FE) method, and will measure the key tolerance parameters of the hydraulic pump to ensure the accuracy of the machining. Through this research, a good design method for the linear reciprocating type of hydraulic pump can be summarized.

• Steel and Composite Structures
• /
• 제32권2호
• /
• pp.189-198
• /
• 2019

This paper aims to study the mechanical performance of three-tower four-span suspension bridges with steel truss girders, including the static and dynamic characteristics of the bridge system, and more importantly, the influence of structural parameters including the side-main span ratio, sag-to-span ratio and the girder stiffness on key mechanical indices. For this purpose, the Oujiang River North Estuary Bridge which is a three-tower four-span suspension bridge with two main spans of 800m under construction in China is taken as an example in this study. This will be the first three-tower suspension bridge with steel truss girders in the world. The mechanical performance study and parametric analysis are conducted based on a validated three-dimensional spatial truss finite element model established for the Oujiang River North Estuary Bridge using MIDAS Civil. It is found that a relatively small side-main span ratio seems to be quite appropriate from the perspective of mechanical performance. And decreasing the sag-to-span ratio is an effective way to reduce the horizontal force subjected to the midtower and improve the antiskid safety of the main cable, while the vertical stiffness of the bridge will be reduced. However, the girder stiffness is shown to be of minimal significance on the mechanical performance. The findings from this paper can be used for design of three-tower suspension bridges with steel truss girders.

• 전기전자학회논문지
• /
• 제23권1호
• /
• pp.151-158
• /
• 2019

본 논문에서는 태양광 및 풍력 발전소 등에 설치되어 있는 다수의 계통 연계형 인버터를 사용하여 Virtual D-STATCOM을 구성하고, 배전계통의 부하의 무효전력과 배전선로의 거리에 따른 케이블의 무효전력을 보상하여 기존의 단일 대용량 D-STATCOM을 설치하지 않고 변전소 인근의 PCC단의 무효전력을 보상하는 방법을 제시한다. 제안된 방식은 Matlab Simulink 시뮬레이션을 통해 동작원리와 무효전력 보상 성능을 검증하였다.

• 전력전자학회논문지
• /
• 제26권2호
• /
• pp.141-149
• /
• 2021

In the field of electric vehicles and AGVs, wireless power transfer (WPT) charging systems have been developed recently because of its convenience, reliability, and positive environmental impact due to cable and cord elimination. In this study, we propose a WPT charging system using a single stage AC-DC converter that can be reduced in size and weight and thus can ensure convenience. The proposed single-stage AC-DC converter can control a wide output voltage (36-54 VDC) within coupling ranges by using the variable link voltage applied to the WPT resonant circuit through phase-shifted modulation at a fixed switching frequency. Moreover, the input power factor and total harmonic distortion can be improved by using the proposed converter. A 1 kW prototype that can operate with an air gap range of 40-50 mm is fabricated and validated through experimental results and analysis.

• International journal of advanced smart convergence
• /
• 제11권2호
• /
• pp.108-117
• /
• 2022

The recent development of information and communication technology has a great impact on the audio/video industry. In particular, IP-based AoIP transmission technology and AVB technology are making changes in the audio/video market. Video signal transmission technology has been introduced to the market through a network, but it has not replaced the video switcher function. Video signals in the conference room or classroom are still controlled by the switching device. In order to switch input/output video devices, a cable that is not limited by distance must be connected to the switcher. In addition, the control of the switching device must be performed by a person who has received professional training. In this paper, it is a technology that can be operated even by non-experts by replacing complex video cables (RGB, DVI, HDMI, DP) with LAN cables and enabling IP-based video switching and transmission (Video Mirroring over IP: VMoIP) to replace video switcher equipment. We are going to do this study, I/O videos were controlled in the form of matrix and high-definition videos were transmitted without distortion, and VMoIP is expected to become the standard for video switching systems in the future.

• Smart Structures and Systems
• /
• 제33권6호
• /
• pp.385-398
• /
• 2024

To improve the accuracy of time-frequency analysis (TFA) and instantaneous frequency (IF) extraction of structural dynamic response signals, this paper improves the spline-kernelled chirplet transform, and a new form of modified spline-kernelled chirplet transform (MSCT) based on revised Gaussian window function and energy concentration principle is put forward. The effectiveness of the proposed method is verified by numerical examples of single-component signal, multicomponent signal, single-degree-of-freedom Duffing nonlinear system and two-layer shear frame structure model. Then, a time-varying cable test is designed to collect the acceleration response signals under linear changing tension, and the IF extraction of these signals is performed by using MSCT, which further verifies the effectiveness and accuracy of this method. Through numerical simulation and experimental verification, it is proved that the proposed method can effectively extract the IF of nonlinear structure and time-varying structure.