• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.243-244
• /
• 2010

• 재활복지공학회논문지
• /
• 제1권1호
• /
• pp.1-6
• /
• 2007

자이로센서기술을 적용하여, 헤드마우스는 웹에 접근하기위한 마우스의 좌 클릭, 우 클릭, 더블 클릭, 드래그와 드롭, 휠 기능까지 시현할 수 있도록 개발되었다. 이 기기는 USB케이블을 사용하여 PC와 매킨토시 환경에서 동작할 수 있도록 설계되었다. 이 장비를 처음 사용할 때, 손을 자유롭게 사용하지 못하는 사람에게 이 장비가 얼마나 큰 자유를 줄 수 있는지 알게 될 것이다. 컴퓨터에 얽매이는 것 대신, 음파센서에 공기를 부는 것 같은 간단한 조작은 휠 기능까지 포함한 일반 마우스의 모든 기능들을 수행할 수 있다. 또한 매크로인터페이스(macro-interface) 도 개발되었다. 반복적 작업을 메모리에 저장함으로써, 버튼 한번 클릭하는 것만으로 반복되는 작업들을 수행할 수 있다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.562-573
• /
• 2006

Incheon Bridge which will be the world's 5th long cable-stayed bridge in 2009 has been built under the management by Korea Highway Corporation. Incheon Bridge consists of several special-featured bridges and construction sections are divided into two groups, the private investment section with the foreign concessionaire and the government-financed section. 8 pile load tests were performed to investigate the behavior of rock-embedded large-diameter drilled shafts at both sections. Among these, 4 tests at the government-financed section have been utilized to adjust the detailed designs that were carried out individually as well as to find the actual bearing capacity of the ground prior to the commencement of constructions under the joint control of all contractors. Comprehensive procedures of the design and the construction of foundations using pile load tests were introduced.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권4호
• /
• pp.380-383
• /
• 2006

Tetanus is rare in Korea due to the introduction of vaccination programs and the advancement in public health. Its common signs are trismus, voice disturbance, neck stiffness, and difficulty in swallowing, etc. A 56 years old man was injured by grasping a high voltage electric cable. After the accident, he fell down on a steel plate and had a head trauma. When he visited Emergency Department, there was multiple electric burn wound on left arm and left facial area. He was hospitalized on a department of neurosurgery, because intra cranial hemorrhage was presumed. 12 days later, he was referred to department of OMFS with developed painful masseter spasms and trismus. That night he violently bit his tongue with his denture. Because masseter muscle and temporal muscle constriction was involuntary, tongue was lacerated and denture was distorted. At first we supposed that the symptom was related with neurologic disturbance following head trauma or electric shock. But it was revealed that trismus was caused by tetanus on an electrophysiological test. By using mechanical ventilation and administration of tetanus immunoglobulin, muscle-relaxant, and sedatives at ICU, symptoms had subsided (4-weeks). Because tetanus is rare disease, we rarely suppose tetanus infection to be a cause of a trismus. Especially it is more difficult to diagnose in patient who has head trauma, burn and neurologic problem as in this case.

• 대한두경부종양학회지
• /
• 제24권1호
• /
• pp.9-14
• /
• 2008

The most important concern to do parotidectomy is correct identification of the facial nerve and preservation of the nerve function. Many descriptions for the localization and branching types of the facial nerve trunk have existed. During the parotid surgery, it is necessary to have knowledges about the incidence and prognostic aspect of a invasion of the facial nerve by the parotid tumors. The method of the dissection and the surgical extent of the parotid gland would be decided not only by the anatomic variation of the facial nerve. but also the size and location of the tumor. Invasion of the facial nerve in parotid malignancies is the most significant factors affecting the prognosis, so radical parotidectomy which consists of the total extirpation of the parotid gland in conjunction with resection of the facial nerve is often required for proper management. Radical parotidectomy is advocated for the surgical treatment of high grade malignancies and in selective recurrent benign tumors intimately involving the facial nerve. Unfortunately, the morphologic and functional deficits created by sacrificing the facial nerve can be emotionally and physically traumatizing to the patient. Therefore, when the facial nerve is sacrificed, immediate reconstruction of the facial nerve should be necessary. Immediate nerve repair with direct anastomosis of the resected nerve ends or placement of a cable nerve graft provides the better cosmetic and functional results. Surgical resection remains the mainstay of treatment for cancer of the parotid gland, and there is general agreement that facial nerve should not be sacrificed unless the tumor is adherent to, or surrounds the nerve. The following statement is described general principles of troublesome management of the facial nerve during surgery for parotid tumor.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.411-416
• /
• 2002

With a rapid industrialization, repair and strengthening methods for a damaged bridges are raised a head in face of safety and reduction of physical distribution costs of bridges. Above all, external prestressing method has the high adaptability for concrete structures and the reliable effect of strengthening. Innovative ideas for bridges strengthening were considered along with established methods. That methods are identified, described. However there is not a systematic and categorized manual for external prestressing method. This study will provide a systematic and reliable manual with investigating the arrangement shape of cable and characteristics of brackets. And the key result of this study is an extensive compilation, which can be used by practicing engineers, of the most effective techniques for strengthening existing bridges.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 추계학술발표대회 개요집
• /
• pp.45-48
• /
• 2003

Over the past few decades, there has been increasing research and commercial activity in invasive and non-invasive biomedical technology. One important challenge to developing these devices involves the increasing density of electrical interconnects. Resistance spot welding is limited in the density of interconnect based on either the size of welding head or the positional precision with which a weld can be made. Development of an automated laser microwelding system would permit the continued advancement of these important biomedical technologies. The objective of this work is to demonstrate the application of pseudo-pulse Nd:YAG laser technology as an alternative to resistance spot welding in performing electrical interconnection within biomedical products. To date, some experiments have been conducted by using a pseudo-pulse 1064 nm Nd:YAG laser, a successful weld of a 25 ${\mu}{\textrm}{m}$ diameter Pt/Ir wire to a 316 stainless steel shim can be made. Another application involves welding clips, which may be used for external interconnection, to electrodeposited nickel domes that make particular interconnections to specific insulated wires within a cable. These results show a great deal of promise for developing such a process.

• Bulletin of the Korean Chemical Society
• /
• 제14권2호
• /
• pp.211-215
• /
• 1993

A multichannel optical detector system employing a self-scanning linear photodiode array has been developed. The photodiode array detector system is designed for various applications which require fast, multichannel detection of transient signals. The detector system consists of a controller which runs on an IBM personal computer and a detector head connected to the controller through a DB-15 cable. The entire scanning of 1024 detector elements is achieved in 20 ms. By using an on-board 16-bit counter/timer, the operational mode of the photodiode array detector is fully programmable by software. The design considerations and the performance of the photodiode array detector system is presented.

• 한국지반환경공학회 논문집
• /
• 제16권1호
• /
• pp.5-16
• /
• 2015

장대교량의 공사비에서 대형 해상기초가 차지하는 비중은 약 40% 수준이다(KICTEP, 2007). 본 연구에서는 가상의 초장대 사장교에서 대수심 대형 복합기초에 대하여 3가지 설계법(허용응력 설계, LRFD 설계, 유로코드 설계)으로 설계검토를 실시하였고, 3차원 유한요소 해석을 통하여 대구경 현장타설말뚝의 거동에 관한 연구를 수행하였다. 그 결과, 허용응력 설계에서 추정한 방법이 연암 소켓길이가 가장 길었다. LRFD와 유로코드 설계법 2에 의해 계산된 연암소켓 길이는 유사하였다. 대구경 현장타설말뚝의 연암소켓길이가 길어짐에 따라 대구경 현장타설말뚝 두부에 작용하는 축력은 작아졌으며 현장타설말뚝의 침하량도 작아졌다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제15권1호
• /
• pp.45-50
• /
• 2013

Closed-loop J-T (Joule-Thomson) refrigeration cycle is advantageous compared to common open loop $N_2$ decompression system in terms of nitrogen consumption. In this study, two closed-loop pure $N_2$ J-T refrigeration systems with sub-atmospheric device for cooling High Temperature Superconductor (HTS) power cable are investigated. J-T cooling systems include 2-stage compressor, 2-stage precooling cycle, J-T valve and a cold compressor or an auxiliary vacuum pump at the room temperature. The cold compressor and the vacuum pump are installed after the J-T valve to create sub-atmospheric condition. The temperature of 67 K is possible by lowering the pressure up to 24 kPa at the cold part. The optimized hydrocarbon mixed refrigerant (MR) J-T system is applied for precooling stage. The cold head of precooling MR J-T have the temperature from 120 K to 150 K. The various characteristics of cold compressor are invstigated and applied to design parameter of the cold compressor. The Carnot efficiency of cold compressor system is calculated as 16.7% and that of vacuum pump system as 16.4%. The efficiency difference between the cold compressor system and the vacuum pump system is due to difference of enthalpy change at cryogenic temperature, enthalpy change at room temperature and different work load at the pre-cooling cycle. The efficiency of neon-nitrogen MR J-T system is also presented for comparison with the sub-atmospheric devices. These systems have several pros and cons in comparison to typical MR J-T systems such as vacuum line maintainability, system's COP and etc. In this paper, the detailed design of the subcooled $N_2$ J-T systems are examined and some practical issues of the sub-atmospheric devices are discussed.