• Journal of Applied Reliability
• /
• v.1 no.2
• /
• pp.121-138
• /
• 2001

Due to large demand for high speed and great capacity for data transfer, WDM, which uses the wavelength division multiplexing technique, is known as alternative way to satisfy those demand for its flexible network operation and management, easy network expansion with existing networks, and enhancement of efficient data transfer rate. For these reasons, a new high capacity WDM optical communication network plan was established. Therefore, the quality of currently deployed optical cables with 81.6 km in length should be assessed to ensure if high capacity WDM system could be implemented on existing optical cables. Two important characteristic parameters, Transfer Loss and PMD (Polarization Mode Dispersion), were measured to evaluate quality of existing optical cable. Transfer Loss was measured at 0.244 dB per kilometer, which is lower than the design standard value at 0.275 dB/km. The measured PMD value gave at 0.030ps/km, and it, therefore, satisfies the value recommended by ITU-T (International Telecommunication Union-T) of 0.5ps/km. In addition, the transfer characteristic for existing 2.5 Gbps and 10 Gbps system were measured and evaluated, and the results showed that error-free transfer is very much feasible. Computer simulation for DWDM system, which is likely be a future backbone network in Korea, to assess the transfer characteristic using the same condition employed for 2.5 Gbps and 10 Gbps was carried out as well. The simulation verified that a stable network operation and reliable service could be provided.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.4
• /
• pp.1-8
• /
• 2009

The proposed real-time structural health monitoring(SHM) system in past transferred and received data, central server gathered data from sensors, through coaxial cable. an immense sum of money is required to structure sensor network using coaxial cable. This paper proposes USN-based structural health monitoring(SHM). AIso, this paper designs and realizes prototypes according to proposed SHM. The value of sensing data obtained through HSDPA transfer to the BMS(Bridge Monitoring Server) passing through the TCP / IP socket by building two-way communication system, We have implemented a complete graph converting full system.

• Journal of Digital Convergence
• /
• v.14 no.10
• /
• pp.261-269
• /
• 2016

This paper aims to propose a novel technology of network convergence to provide ultra high speed internet services over CATV networks, by which a CMC(cable modem concentrator) and CM(cable modem) of 1Gbps level are designed. This technology not only lowers the production cost in comparison to the existing bonding technology with DOCSIS specification but also enables the adjustment of data speed based on the channel bandwidth. According to the experiments, when convolutional code rate with 128QAM is changed to 1/2, 2/3, 3/4 and 7/8, the data recorded the maximum transmission speed of up to 299 Mbps at the zero error rate. As the convolutional code rates with 256QAM is increased, it showed 334Mbps at the error rate of $10^{-5}$. Based on the findings of this paper, if we secure the channel bandwidth of 200MHz and adjust the modulation order of QAM and the convolution code rate depending on the channel status, we can get the transmission speed of more than 1Gbps, which is much more competitive in its function and price than the existing technology based on DOCSIS.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.12
• /
• pp.843-855
• /
• 2015

This study developed a band-pass filter based artificial filter bank(BAFB) based on that in order to efficiently obtain the significant dynamic responses. The BAFB was then optimized about the El-centro earthquake wave which was often used in the construction research, and the software implementation of BAFB was finally embedded in the wireless unified management system(WiUMS). For the evaluation of the developed BAFB, a real time dynamic response experiment was performed on a cable-stayed bridge model, and the response of the cable-stayed bridge model was measured using both the traditional wired system and the developed BAFB-based WiUMS. The experiment results showed that the compressed dynamic response acquired by the BAFB-based WiUMS matched significantly with that of the traditional wired system while still carrying sufficient modal information of the cable-stayed bridge. Finally, the developed BAFB was able to reconstruct or re-sample the dynamic response wholly from the compressed response signal, and it can be applied as a new kind of measurement system for a wireless sensor networks based structural health monitoring system that secures both economy and efficiency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9B
• /
• pp.1126-1142
• /
• 2011

This paper addresses the stereoscopic 3D broadcasting technology that delivers the 3DTV contents through the digital cable networks. In order to convey the 3D contents via DCA TV network, specifications of 3D video format, compression, multiplexing, signalling and transport are to be developed. Since 3D has some constraints unlike 2D, it is required to be well designed by considering the capacity of the additional view and the backward/forward compatibility. This paper goes with the latest trends of 3D standard, requirements and service scenarios and then covers the 3D format, compression, multiplexing and signaling, service information and transport/reception technologies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11B
• /
• pp.1142-1150
• /
• 2009

In this paper, we propose an novel bandwidth scheduling algorithm for the MAC protocol employed by the Data Over Cable Service Interface Specifications (DOCSIS) 3.0 compliant cable networks. The proposed algorithm statistically improves the chances of request piggybacking to minimize the access delay. It utilizes the piggyback request feature of the segment packets that has been newly specified in DCOSIS 3.0. In DOCSIS 3.0, a bandwidth request can be granted to several upstream channels within an upstream bonding group. The grant on each individual channel is treated as a segment packet. We find the optimal segment placement to minimize the access delay in the proposed algorithm. We also use a self-similar traffic model for simulation and analysis to evaluate the performance of the proposed algorithm.

• Journal of Digital Convergence
• /
• v.13 no.9
• /
• pp.219-224
• /
• 2015

The broadcasting communications service will accelerate its development with the convergence of broadcasting media and internet service. In the field of CATV network related technology, only those service providers will be able to survive in future, and they can combine available services in the most effective and economical way. This research aims to explain the CATV status of Korea and China and its technology trends. It also analyzes CMC(Cable Modem Concentrator) technology, suggested as one of the high-speed internet technology. CMC technology has the advantages of enhancing the transmission speed while using the existing basic structure of HFC network and expanding service area by adding amplifiers within CMC. The distance between coaxial cables is getting shorter with more concentrated areas in large cities in Korea. However, in China, the demand for long distance transmission service is increasing. CMC technology satisfies both short and long distance service subscribers without any geographical limitations. With these advantages, CMC technology is expected to generate lots of economic benefits if applied for the CATV network in the area of China, Middle East, and Southeast Asia.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.6
• /
• pp.1069-1076
• /
• 2007

DOCSIS 3.0 protocol are proposed to support high-speed cable network DOCSIS 3.0 MAC protocol regulates CM and CMTS channel transfer times through MAP message. So MAP Inter-arrival time is primary factor of network performance. However, standards does not include the details of MAP Inter-arrival Time affecting the performance of MAC protocols for DOCSIS 3.0. In this paper, we evaluated the performance of DOCSIS 3.0 protocol follow in MAP Inter-arrival Time. Based on the evaluation results, we propose the optimal MAP Inter-arrival Time. We found that the protocol shows best performance when the MAP Inter-arrival Time is 0.05sec. The research results can apply to performance element which important for the construction of DOCSIS 3.0 base cable networks.

• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.439-459
• /
• 2010

Structural health monitoring (SHM) of civil infrastructure using wireless smart sensor networks (WSSNs) has received significant public attention in recent years. The benefits of WSSNs are that they are low-cost, easy to install, and provide effective data management via on-board computation. This paper reports on the deployment and evaluation of a state-of-the-art WSSN on the new Jindo Bridge, a cable-stayed bridge in South Korea with a 344-m main span and two 70-m side spans. The central components of the WSSN deployment are the Imote2 smart sensor platforms, a custom-designed multimetric sensor boards, base stations, and software provided by the Illinois Structural Health Monitoring Project (ISHMP) Services Toolsuite. In total, 70 sensor nodes and two base stations have been deployed to monitor the bridge using an autonomous SHM application with excessive wind and vibration triggering the system to initiate monitoring. Additionally, the performance of the system is evaluated in terms of hardware durability, software stability, power consumption and energy harvesting capabilities. The Jindo Bridge SHM system constitutes the largest deployment of wireless smart sensors for civil infrastructure monitoring to date. This deployment demonstrates the strong potential of WSSNs for monitoring of large scale civil infrastructure.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.5 s.347
• /
• pp.7-16
• /
• 2006

IPTV is referred to the service which provide integrated IPTV services for providing video, 10/100-Mbit/sec Internet, voice, video-on-demand (VOD), and other broadband applications including home security, video conferencing, and telemedicine. All services are integrated into an IP (Internet Protocol) architecture designed specifically for Gigabit Ethernet FTTH systems, HFC or xDLC. It is absolutely necessary that telecon operators provide IP video delivery platforms that enable service providers to transform their business. With their own products, they can better manage their existing services and generate new revenues from broadcast TV, movies on demand and multimedia. Triple-play is a combination of broadcast, telephony and broadband services offered through IPTV networks. With cable operators allowed to offer a triple-play bundle, the nation's telecom operators are beginning to get a little anxious. Cable operators assert that triple-play is a must-have and natural extension of the cable service bundle. The Korean Cable TV Association asserts that the triple-play model is of paramount importance to the cable industry's future growth. But the telecom sector considers itself unfairly disadvantaged, saying they cannot compete until regulatory issues are resolved. The start of web-based television in Korea may still be some time off with a confrontation between the nation's IT regulator and broadcasting sector over the service's legal boundaries shows no signs of being resolved my time soon. korea should be is the fastest-growing provider of IPTV solutions in the industry, with over worldwide customers.