• 한국토양비료학회지
• /
• 제40권1호
• /
• pp.64-70
• /
• 2007

본 실험은 서로 다른 온도조건하에서 두 가지 Na 화합물을 이용하여 Ca-벤토나이트를 Na-벤토나이트 전환하였다. 두 가지 Na 화합물은 양이온 원으로 Na를 가지고 있는 5가지 화합물 중에서 선택하였다. 전환된 Na-벤토나이트의 팽창능은 Na의 농도가 높아질수록 증가하였으며 반면 온도가 증가할수록 최대 Na 농도는 감소하는 경향을 보였다. Na_2CO_3 은 조사된 Na-화합물 중에서 최대 팽창능을 보여주었으며 팽창지수는 처리온도가 최대 100 에 도달할 때까지 최고로 증가하였다. 동일 Na 처리농도에서는 팽창지수는 체류시간이 증가하거나 온도가 높아질 때 다소 감소하였다. 전환된 Na-벤토나이트의 흡착은 조사된 Pb나 Cd의 평형농도가 증가함에 따라 증가하는 경향을 보였으며 Pb의 흡착량이 Cd보다 다소 높은 것으로 조사되었다. 그리고 전환된 Na-벤토나이트에 Pb와 Cd의 흡착은 5 % $Na_2CO_3$. ${\approx}$ 5% $NaHCO_3$ > 3 % $NaHCO_3$ > 3 % $Na_2CO_3$ > 1 % $NaHCO_3$ > 1 % $Na_2CO_3$ > 원형 Na-B > 원형 Ca-B. 그러나 이러한 결과는 CEC에 따른 흡착의 결과와는 다소 상반되는 결과를 보여주고 있다.

• 한국세라믹학회지
• /
• 제40권5호
• /
• pp.447-454
• /
• 2003

B $i_{1.84}$P $b_{0.34}$S $r_{1.91}$C $a_{2.03}$C $u_{3.06}$ $O_{10+{delta}$의 출발조성비로 99.99%의 순도를 갖는 B $i_2$ $O_3$, PbO, SrC $O_3$, CaC $O_3$, CuO 분말 시약을 사용하여 고상반응법으로 합성하였다. 이렇게 합성된 Bi계 110 K 단일상의 고온초전도 물질을 다시 분말 상태로 만든 후, AgO, A $u_2$ $O_3$, MgO 금속산화물 분말을 각각 50 wt%의 비율로 혼합하였다. AgO, A $u_2$ $O_3$, MgO의 금속분말이 혼합된 시편들을 820~85$0^{\circ}C$로 각각 최종 소결시킨 후, 각 시편들에 대하여 XRD, $T_{c}$, SEM, EDS 등의 실험을 진행하였다. 얻어진 시편들의 $T_{c}$는 순수한 Bi-2223 상보다 낮지만, AgO 금속분말을 50 wt% 혼합한 시편의 임계전이온도가 99.58 K로 A $u_2$ $O_3$나 MgO를 50 wt% 혼합한 시편들보다 더 높게 나타났다. 또한, 표면 입자(grain)의 배열 상태는 AgO 금속분말을 50 wt% 혼합한 시편이 A $u_2$ $O_3$나 MgO를 50 wt% 혼합한 시편들보다 더 치밀화 되는 경향을 나타내었다.내었다.나타내었다.내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.187-189
• /
• 1994

Lead-acid battery is used widely as a power source at a automobile, industrial machines, folk lifts, U.P.S. etc. Since lead-acid battery is cheaper than any other ones. But this battery has many disadvantages such as heavy, low energy density, environment problem etc. In this article, we introduce potential step methods to investigate corrosion behaviour of positive grids for lead alloys.

• 분석과학
• /
• 제20권1호
• /
• pp.41-48
• /
• 2007

유리소재 중의 미량의 납 및 카드뮴을 Na-DDTC를 가하여 Pb- 및 Cd-DDTC 착물을 형성시켜 유리 matrix 원소들로 부터 분리한 다음 MIBK로 추출하여 ICP-AES로 분석하였다. 유리 기질성분인 Na, Si, Mg 그리고 Ca 화합물 등은 미량의 납 및 카드뮴 정량에 방해작용을 하므로 직접 분석할 수 없으므로 용매추출법에 의해 Pb 및 Cd를 효율적으로 분리할 수 있었다. Pb 및 Cd 화합물이 첨가된 시험기준 시료와 NIST SRM 1412에 대한 용매추출실험에서 matrix의 영향을 받지 않고 정량하였다.

• Asian Journal of Atmospheric Environment
• /
• 제6권2호
• /
• pp.83-95
• /
• 2012

China has been a top producer and exporter of refined lead products in the world since the year 2000. After the phasing-out of leaded gasoline in the late 1990s, non-ferrous metallurgy and coal combustion have been identified as potential major sources of aerosol lead in China. This paper presents the single particle analytical results of ambient aerosol particles collected near a lead smelter using a scanning electron microscopy- energy dispersive x-ray spectroscopy (SEM-EDX). Aerosol particle samples were collected over a 24-hour period, starting from 8 pm on 31 May 2002, using a high volume TSP sampler. For this near source sample, 73 particles among 377 particles analyzed (accounting for 19.4%) were lead-containing particles mixed with other species (S, Cl, K, Ca, and/or C), which probably appeared to be from a nearby lead smelter. Lead-containing particles of less than $2{\mu}m$ size in the near source sample were most frequently encountered with the relative abundances of 42%. SEM-EDX analysis of individual standard particles, such as PbO, PbS, $PbSO_4$, $PbCl_2$, and $PbCO_3$, was also performed to assist in the clear identification of lead-containing aerosol particles. Lead-containing particles were frequently associated with arsenic and zinc, indicating that the smelter had emitted those species during the non-ferrous metallurgical process. The frequently encountered particles following the lead-containing particles were mineral dust particles, such as aluminosilicates (denoted as AlSi), $SiO_2$, and $CaCO_3$. Nitrate- and sulfate-containing particles were encountered frequently in $2-4{\mu}m$ size range, and existed mostly in the forms of $Ca(NO_3,SO_4)/C$, $(Mg,Ca)SO_4/C$, and $AlSi+(NO_3,SO_4)$. Particles containing metals (e.g., Fe, Cu, and As) in this near source sample had relative abundances of approximately 10%. Although the airborne particles collected near the lead smelter contained elevated levels of lead, other types of particles, such as $CaCO_3$-containing, carbonaceous, metal-containing, nitrates, sulfates, and fly-ash particles, showed the unique signatures of samples influenced by emissions from the lead smelter.

• 한국세라믹학회지
• /
• 제37권12호
• /
• pp.1212-1220
• /
• 2000

Bi-2223 초전도체계에서 석출물을 flux-pinning center로 이용할 수 있는지 가능성을 타진하기 위하여 $Bi_{1.8}$P $b_{0.4}$S $r_{2}$C $a_{2.2}$C $u_3$ $O_{8}$ 조성을 가진 Bi-2223/Ag 선재를 반응온도, 산소분압, 시간 등을 변화시키면서 열처리를 행하였다. 열처리 후 석출물들은 XRD, SEM, TEM, EDS로 분석하였다. Bi-2223 모상내의 (Ca, Sr)$_2$(Pb,Bi) $O_4$, B $i_{0.5}$ P $b_3$S $r_2$C $a_2$Cu $O_{12+}$$\delta$/ (3221)와 같은 2차상들의 크기와 분포는 2223 입자들의 연결성을 파괴하지 않고 열처리 조건에 의해서 조절할 수 있었다. 서냉 열처리가 된 시편은 임계전류밀도( $J_{c}$)값이 증가하였는데, 이는 2223 입자내 나노미터 크기로 형성된 석출물들이 flux-pinning sites로 작용한 것으로 추정된다.다.

• E2M - 전기 전자와 첨단 소재
• /
• 제4권3호
• /
• pp.201-210
• /
• 1991

본 논문에서는 (B $i_{1-x}$ P $b_{x}$)$_{2}$S $r_{2}$C $a_{2}$C $u_{3.6}$ $O_{y}$ (x=0~0.5)로 조성된 분말의 최적 하소온도를 결정하고 시편의 최적 소결온도를 규명하기 위하여 열분석을 하였다. 또 단일상의 고온 초전도체를 제작하기 위하여 열처리 온도, 시간 및 Pb 함량 변화에 따라 제작된 시편의 미세구조, 조성, 전기저항 및 전류밀도를 측정하여 상호 연관성을 종합적으로 분석, 검토하여 상변이에 관한 원인을 규명하고자 하였다. 또한 실용화 전 단계로서 임계특성 해석을 위하여 성형조건을 변화시켜 시편을 제작, 전류밀도값을 측정하였다.였다.다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권7호
• /
• pp.103-111
• /
• 2015

Soil washing with ethylenediaminetetraacetic acid (EDTA) is highly effective in the remediation of soils contaminated with heavy metals. The EDTA recycling process is a requisite for reducing the operating cost. The applicability of Na₂S addition on the precipitation of heavy metals from the spent soil washing solution and thereby recycling of EDTA was investigated. Addition of Na₂S into the single metal-EDTA and the mixed metal-EDTA solutions ([Na₂S]/[metal-EDTA] ratio = 30, reaction time = 30 min and pH = 7~9) was highly effective in the separation of Cu and Pb from metal-EDTA complexes, but not for Ni. The Zn removal efficiency varied with pH and slightly increased upto 40% as the reaction time increased from 0 to 240 min which was longer than those for Cu and Pb. Ca(OH)₂ was subsequently added to induce further precipitation of Zn and Ni and to reduce the Na₂S dose. At the [Na₂S]/[metal-EDTA] ratio of 10, the removal efficiencies of all heavy metals excluding Ni were above 98% with the dose of Ca(OH)₂ at 0.002, 0.006 and 0.008 g into 100 mL of Cu-, Pb- and Zn-EDTA solutions, respectively. However, Ca(OH)₂ addition was not effective for Ni-EDTA solution. A further research is needed to improve metal removal efficiency and subsequent EDTA recycling for the real application in field-contaminated soils.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 1999년도 제1회 학술대회논문집(KIASC 1st conference 99)
• /
• pp.3-9
• /
• 1999

The grain morphology, the changes in morphology and Jc with the thermo-mechanical treatment (TMT) history, the field dependence of Jc and the nature of intergranular bonding were studied in $T_{10.8}$$Pb_{.2}$$Bi_{0.2}$$Sr_{1.8}$$Ba_{0.2}$$Ca_{2.2}$$Cu_{3}$$O_{z}$/Ag tapes. As a result, incorporation of intermediate rolling during the final heat-treatment resulted in of plate-like TI-1223 grains, and thus enhanced Jc. Jc's near 2.5$\times$104 A/cm2 at 77 K and 0 T were obtained in just rolled tapes with an excellent reproducibility. The high Jc's seem to grain-connectivity easy recovery of excellent grain-connectivity during final heat-treatment after inter -mediate rolling, probably due to retarded T1 evaporation and excessive Ca content in the present composition. The strong field dependence of Jc even in low fields, however, indicated that there still existed significant weak-links and the degree of directional grain-alignment was far from the desired one. The intergranular binding in the tapes seemed to be mainly dominated by SIS junctions.

• 한국전기전자재료학회논문지
• /
• 제11권2호
• /
• pp.138-145
• /
• 1998

The $(Pb_{0.9}Ca_{0.1})TiO_3$[PCT] thin films have been deposited by sol-gel processing on Si-wafer and ITO glass substrates. The creak-free films have been obtained by rapid thermal annealing at $700^{\circ}C$ for 10 minute and characterized by XRD, SEM and electrical measurements. Their tetragonality c/a was 1.041 and grain size was $0.15{\sim}0.2{\mu}m$. When the electrode system of sample was Au/PCT/ITO(MFM) and film thickness was $0.8{\mu}m$, dielectric constant, dielectric loss and Curie temperature were about 149, 0.085 and $449^{\circ}C$ at 10kHz, respectively. Spontaneous polarization $P_s$, remnant polarization $P_r$ and coercive field $E_c$ were about $5.29{\mu}C/cm^2$, $4.15{\mu}C/cm^2$ and 82kV/cm calculated by hysteresis loop.