• Journal of Ecology and Environment
• /
• v.29 no.6
• /
• pp.551-558
• /
• 2006

Effects of Pb and $CO_2$ on soil microbial community associated with Pinus densiflora were investigated using community level physiological profiles (CLPP) and 16S rDNA PCR-denaturing gradient gel electrophoresis (DGGE) methods. Two-years pine trees were planted in Pb-contaminated soils and uncontaminated soils, and cultivated for 3 months in the growth chamber where $CO_2$ concentration was controlled at 380 or 760 ppmv. The structure of microbial community was analyzed in 6 kinds of soil samples (CA-0M : $CO_2$ 380 ppmv + Pb 0 mg/kg + initial, CB-0M : $CO_2$ 380 ppmv + Pb 500 mg/kg + initial, CA-3M : $CO_2$ 380 ppmv + Pb 0 mg/kg + after 3 months, CB-3M : $CO_2$ 380 ppmv + Pb 500 mglkg + after 3 months, EA-3M : $CO_2$ 760 ppmv + Pb 0 mg/kg + after 3 months, EB-3M : $CO_2$ 760 ppmv + Pb 500 mg/kg + after 3 months). After 3 months, the substrate utilization in the uncontaminated soil samples (CA-3M vs EA-3M) was not significantly influenced by $CO_2$ concentrations. However, the substrate utilization in the Pb-contaminated soil samples (CB-3M vs EB-3M) was enhanced by the elevated $CO_2$ concentrations. The results of principal component analysis based on substrate utilization activities showed that the structure of microbial community structure in each soil sample was grouped by Pb-contamination. The similarities of DGGE fingerprints were 56.3 % between the uncontaminated soil samples (CA-3M vs EA-3M), and 71.4% between the Pb-contaminated soil samples (CB-3M vs. EB-3M). The similarities between the soil samples under $CO_2$ 380 ppmv (CA-3M vs CB-3M) and $CO_2$, 760 ppmv (EA-3M vs EB-3M) were 53.3% and 35.8%, respectively. These results suggested that the structure of microbial community associated with Pinus densiflora were sensitively specialized by Pb-contamination rather than $CO_2$ concentration.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.05a
• /
• pp.22-27
• /
• 1993

we prepared 70K new BiPbAgSrCaCuO superconductor used diffusion of dual layer which composed of SrCaCuO and BiPbAgCuO compound. This method is used permeation and diffusion on partial melting point of BiPbAgCuO compound. Samples were analyzed by means of X-ray diffraction analysis, Thermal analysis, critical temperature and scanning electron microscopy. It was found that the best results were obtained for spread volume (A:B=1:0.6) and sintring time 210hours.

• Journal of the Korean Society for Heat Treatment
• /
• v.4 no.1
• /
• pp.13-18
• /
• 1991

The formation of high $T_c$ phase is very sluggish and c parameter of unit cell of high $T_c$ phase is about $37{\AA}$. High $T_c$ oxide superconductor with a $T_c$ above 100 K has been successfully prepared by solid state reaction method in BiSrCaCuO system by Pb adding. The microstructure related to the formation of the high $T_c$ phase has been investigated. As compared with YBCO compound, the formation reaction of the high $T_c$ requires long time heat treatment. It is due to the transformation from the low $T_c$ phase to high $T_c$ phase. The sintering just below the melting point of the calcined powder mixture is effective on the formation of the high $T_c$ phase in Pb-added BiSrCaCuO system. The growth of the high $T_c$ superconducting phase has a thin plate shape, which is characterized by the c parameter of $37{\AA}$. The formation of the high $T_c$ phases is delayed by the excessive addition of Pb. The lattice parameter(c) of the unit cell (both the low and high $T_c$ phases) is increased with increase of Pb.

• Journal of the Korean Ceramic Society
• /
• v.39 no.7
• /
• pp.680-686
• /
• 2002

The solidification/stabilization mechanism of each cementious material was investigated. It was found that when $C_3$S was hydrated , the Pb element could be transferred to the insoluble Ca[Pb(OH)$_3$.$H_2O$]$_2$and the Cr element to the CaCr $O_4$$H_2O$. The addition of heavy metal tends to delay the hydration until initial 7 days. The Pb element as also delayed the hydration and the Cr element was substituted for the ettringite. On the occasion of the hydration of $C_4$ $A_3$ $S^{S}$, the Pb and Cr ions were solidified/stabilized by the substitution into the ettringite and/or monosulfate. Leaching of the Pb, Cr and Zn elements in the solidified material was extremely little, indicating that heavy metals were effectively solidified/stabilized in the hydrated cementious materials. Solidification/stabilization of heavy metal ions in the industrial wastes such as the STS, BF and COREX sludge was investigated. In case of the mixing ratio of cement and slag was 3 : 7, leaching of hazardous heavy metal ions was very little, indications that the solidification and stabilization was very successful.l.

• Journal of Environmental Science International
• /
• v.7 no.1
• /
• pp.57-61
• /
• 1998

The biosorption of heavy metals has received a lot of attraction for application of metal ions treatment. In this work, we studied with Arthrobactor sp., screening from a wastewater containing heavy metals. The Pb uptake capacity of Arthrobactor sp. was nearly 146.9 mg Pb/g dry biomass(initial concentration, 500 may L), whereas the Pb uptake capacity of Sacchuomyces cerevisiae and Sacchuomyces uvuum were only around 39.40 and 35.65 mg Pb yg dry biomass, respectively. The Pb and Cr were removed from metal solution much more effeciently than were the other metals(Cd and Cu). The Pb uptake capacity of Aythrobactor sp. increased with increasing in pH(1.8, 3.0 and 4.0) and decreased with Increaslng of biomass concentration. At pH 4.0, the Pb uptake capacity reached 244 mg Pb/g dry biomass in Pb initial concentration of 1000 mg/L. The Pb uptake capacity of Ayhol)actor sp. treated by KOH and $CaCl_2$ were increased above values obtained with untreated Ayurobactor sp. However, the Pb uptake capacity fore the breakthrough points were reached.

• Resources Recycling
• /
• v.33 no.2
• /
• pp.54-61
• /
• 2024

When steel contaminated with Pb, produced by the decay of natural radionuclides, is remelted, Pb distributes among the metal, slag, and gas phases. In this study, 5 wt%Pb was added to Fe and melted with CaO-SiO₂-Al₂O₃-MgO slag to investigate Pb's distribution in the metal/slag/gas. As slag basicity ((wt%CaO)/(wt%SiO₂)) increased, Pb solubility in Fe slightly increased, while Pb in the slag tended to decrease. Consequently, the slag/metal distribution ratio of Pb decreased with increasing basicity. Thermodynamic calculations revealed that the slag/Fe phase distribution ratio of Pb remained very low irrespective of the activity coefficient of PbO in the slag, consistent with the experimental results. The calculated evaporation rate of Pb in Fe-Pb was approximately 22 times that of Fe; hence, most of the Pb evaporated into the gas phase.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.4 no.2
• /
• pp.3-9
• /
• 2005

In this study, the chip breaking characteristics of S, PbS and BiS free machining steels have been assessed. PbS free machining steel shows the lowest value of chip thickness ($t_c$) under the same cutting conditions. SM10C steel has the largest value of the chip cross-section area ratio ($R_{CA}$). As the feed rate becomes larger the chip breaking cycle time ($T_B$) decreases and the chip breaking index ($C_B$) increases. The properly controlled-C type chip has been obtained with the value of $C_B$ between 0.05 and 0.2. Free machining steel, PbS produces the properly controlled-C type chip in a wider feed rate range than other steels.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.10a
• /
• pp.98-101
• /
• 1988

The material system (Bi$\sub$0.7/Pb$\sub$0.3/)Sr$_1$Ca$_1$Cu$\sub$1.8/Ox forms, at 845$^{\circ}C$, two major phases having a high Tc(100K) and a low Tc(∼70K) both of which consists of platelets and a non-superconducting minor phase which has rod-like shape and isolated by the major phases. As the sintering period increases, the amount of high Tc phase increases accompanying the decrease in low Tc phase while the amount of the non-superconducting phase is sintering period independent, resulting in a superconductor with Tc of 100K. Changes in compositions of each phase also occur during sintering due to evaporation of bismuth and lead.

• Journal of the Korean Ceramic Society
• /
• v.39 no.11
• /
• pp.1113-1118
• /
• 2002

Nano sized $(Pb_{0.5}Ca_{0.5})(Fe_{0.5}Nb_{0.5})O_3$ (PCFN) powders with the stoichiometric composition and the uniform size distribution were successfully synthesized by the metal-citrate process through the calcination of the polymeric precursor which consisted of the metal ions and the organic network. The crystallization of the initial amorphous powders began at $400{\circ}$ and completed at $700{\circ}$. The pyrochlore phase was detected caused by the dissociation of PbO above $900{\circ}$. Single phase perovskite PCFN powders with 40 nm size and uniform shape were obtained through the calcination at $700{\circ}$.

• Journal of the Korean Ceramic Society
• /
• v.33 no.10
• /
• pp.1131-1137
• /
• 1996

The dielectric properties and phase stabilities of Pb(Zn0.6Mg0.4)1/3Nb2/3O3 [PZMN]system were investigated into substitution of A-site with Ba, Sr and Ca ions. The A-site substitutions led to the complexity of components of perovskite phase and then DPT coefficient increased. The A-site substitutions of Ba or Sr ion perovskite single phase could be easily formed by columbite process due to increase of perovskite phase stability. The variation of lattice parameters in specimen obeyed Vegard's law and curie temperature and dielectric constant of specimen decreased linearly. But Ca substitution led to perovskite phae instability. The lattice parameter dielectric constant and curie temperature of specimens drasticaly decreased with formation of pyrochlore phase.