• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.42-45
• /
• 2001

$(Ba_{0.6}Sr_{0.4}Ca_{x})TiO_{3}+yZrO_{2}$ wt% (x=0.10, 0.15, 0.20, y=0.5~3.0) specimens were fabricated by the mixed-oxide method and then the structural and dielectric properties as a function of the composition ratio and $ZrO_2$ contents were studied. All BSCT specimens showed dense and homogeneous structure without the presence of the seconds phase. The Curie temperature and the dielectric constant at room temperature decreased with increasing the Ca/Ba composition ratio and $ZrO_2$ content. The BSCT(50/40/10) specimens showed the excellent tunability property. And the tunability were increased with increasing the contents of $ZrO_2$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.42-45
• /
• 2001

(Ba$_{0.6-x}$Sr$_{0.4}$Ca$_{x}$)TiO$_3$+yZrO$_2$wt% (x=1.10, 0.15, 0.20, y=0.5~3.0) specimens were fabricated by the mixed and ZrO$_2$ contents were studied. All BSCT specimens contents were studied. All BSCT specimens showed dense and homogeneous structure without the presence of the seconds phase. The Curie temperature and the dielectric constant at room temperature decreased with increasing the Ca/Ba composition ratio and ZrO$_2$ content. The BSCT(50/40/10) specimens showed the excellent tunability property. And the tunability were increased with increasing the contents of ZrO$_2$./TEX>.

• 한국세라믹학회지
• /
• 제21권2호
• /
• pp.135-142
• /
• 1984

The electrical conductivity of compositions in the system $CaO-ZrO_2$ has been measured by 2-probe tech-nique in the temperature range 350~75$0^{\circ}C$. The composition of maximum conductivity in this system is within the cubic solid-solution region close to low-calcia cubic solid-solution phase boundary. The results are as follows : 1) The maximum conductivity was found 13mol CaO in zirconia. 2) As the CaO content was increased from 13 to 21 mol% the electrical conductivity decreased for any given temperature and the activation energy increased. 3) As the firing temperature and soaking time was increased the electrical conductivity increased and activation energy decreased.

• 한국재료학회지
• /
• 제8권3호
• /
• pp.256-262
• /
• 1998

산소이온전도체 13mol% CaO안정화 $ZrO_{2}$에 대한 $AI_{2}$$O_{3}$의 첨가효과를 살펴보기 위해 출발원료분말을 ($Zr_{0.87}$ $Ca_{0.13}$ O$1.87_{1-x}$ $AI_{2}$$O_{3}$)x,(x=0,0.01,0.02,0.03,0.05)와 같은 조성이 되도록 공침법으로 합성하고 $1400^{\circ}C$에서 소결시켜, $AI_{2}$$O_{3}$의 첨가에 따른 /grain size의 변화, $AI_{2}$$O_{3}$의 형태 및 존재위치, 소결밀도의 변화, 그리고 저항률의 변화를 살펴보았다. 그 결과, 결정립의 크기는 1mol% A $I_{2}$$O_{3}$첨가까지는 증가하였고, 2mol%첨가이상에서는 입계로 석출하기 시작한 $AI_{2}$$O_{3}$의 pinning효과에 기인되어 감소하였다. 또 1mol% $AI_{2}$$O_{3}$첨가시에 격자상수값의 급격한 감소가 보여지고, 그 이상에서는 변화가 별로 없어 13mol%CaO안정화 $ZnO_{2}$의 고용도한은 최대 1mol%임을 알 수 있었다. 전기전도도 또한 1mol% $AI_{2}$$O_{3}$첨가시에 증가됨을 나타냈다. $ZrO_{2}$에의 고용도한까지의 $AI_{2}$$O_{3}$첨가는 결정립성장을 촉진시키며 밀도값의 증대를 가져오고 전기전도도의 증가를 가져오는 긍정적인 효과를 나타냈다.

• 한국결정성장학회지
• /
• 제2권2호
• /
• pp.20-32
• /
• 1992

$Na_2O-CaO-MgO-Al_2O_3-SiO_2$계를 기본조성으로 하여 $Na_2O$에 $Li_2O 0.05wt%, $K_2O$를, CaO에 MgO 12.0wt%, ZnO 6.0%를 각각 치환하여 조성을 선정하였다. 기본 유리조성의 결정상은 wollastonite이고, 치환된 조성들은 diopside, diopside.tremolite의 혼정이 나타났다. $Na_2O$를 $Li_2O$로 치환한 시편은 열팽창계수가 감소하였지만 CaO를 ZnO로 치환한 시편은 열팽창 계수가 증가하였다. 곡강도에 있어서는 치환에 따라 모두 증가시켰다. 핵행성제로 $ZrO_2와 $CaF_2$를 각각 1~2wt%의 변화를 시켜본 결과 핵형성제 $ZnO_2$와 $CaF_2$가 1:1, 1:2인 시편은 $1000~1050^{\circ}C$온도에서 급격한 결정성장을 보였으며 1:2시편이 가장 낮은 열팽창 계수값을 나타냈다. 곡강도는 모두 $1000~1050^{\circ}C$의 결정화 온도 범위에서 높은 강도를 나타내었다. 결정화에 필요한 활성화 에너지는 Ozawa와 Kissinger식으로 plot하여 각각 55.24kcal/mol과 53.05kcal/mol이다.

• 한국세라믹학회지
• /
• 제39권11호
• /
• pp.1017-1022
• /
• 2002

$(Ba_{1-x}Ca_x)(Ti_{1-y}Zr_y)O_3(BCTZ)$ powders for the Ni-electrode Multilayer Ceramic Capacitor(MLCC) were synthesized via hydrothermal treatment using mixed aqueous solutions of $BaCl_2{\cdot}2H_2O,\Ca(NO_3)2{\cdot}4H_2O,\ ZrOCl_2{\cdot}8H_2O$ and $TiCl_4$. Two component and three component systems were also extensively studied for basic data. BT, CT and BZ powders were crystalline but CZ was determined to be amorphous under the same synthetic condition. In BTZ system, Zr and Ti were completely soluble and Ca would be substituted for Ba up to ∼6 mol% in BCT. The submicron-sized $(Ba_{0.95}Ca_{0.05})(Ti_{0.80}Zr_{0.20})O_3$ powder of the target composition was successfully synthesized at $150{\circ}$ for 12h.

• 한국세라믹학회지
• /
• 제29권5호
• /
• pp.341-346
• /
• 1992

The effects of CaO addition on the low temperature degradation behavior of 2.5Y-TZP ceramics were investigated. Y2O3-CaO-ZrO2 ceramics were prepared from the commercial Y-TZP powder added within 1 mol% of CaO. Fully tetragonal phase could be obtained at each composition under sintering condition of 1500$^{\circ}C$ for 1 hour. As the amount of CaO increased, grain size was decreased. From the result of heat treatment at 200$^{\circ}C$, volume fraction of monoclinic phase formed on the surface of each specimen was decreased with higher CaO amount. Stability of tetragonal ZrO2 phase for low temperature heat treatment was increased by CaO addition without the degradation of mechanical properties.

• 한국결정성장학회지
• /
• 제18권1호
• /
• pp.22-26
• /
• 2008

[ $CaCO_3$ ]와 $ZrO_2$를 모체결정으로 하고 Pr을 부활제로, 융제로 $B_2O_3$을 사용하였으며 고상반응법으로 합성하여 $CaZrO_3$ : Pr 적색 축광성 형광체를 제조하였다. XRD 분석을 통하여 시료의 결정상을 확인하였고, PL 검사를 통하여 $480{\sim}570nm$영역과 $590{\sim}700nm$ 영역의 발광 스펙트럼을 관찰하였다. 융제로서 $B_2O_3$을 각각 1%, 5%, 10%를 첨가하여 고상반응법으로 합성하였을 때, 494 nm 에서 발광은 $B_2O_3$의 농도가 1%일 때 가장 높은 강도를 나타냈다. 적색을 나타내는 620 nm에서의 Peak는 $B_2O_3$의 농도가 10%일 때 가장 높은 강도를 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.259-259
• /
• 2007

The low temperature sintering of dolomite type borates, $CaZr(BO_3)_2$[CZB] ceramics and their microwave dielectric properties were investigated The sintering temperature of CZB ceramics could be reduced from $1150^{\circ}C$ to $925^{\circ}C$ by the addition of sintering additive. $CaZrO_3$, $ZrO_2$ and $CaB_2O_4$ second phases were found in the CZB ceramics. The syntheses, sintering properties, microstructures, and dielectricnproperties of dolomite-type borates were examined by XRD, thermal analysis, electron microscopy, network analyzer, and the results are discussed intensively. The compatibility with silver electrode was also explored.

• Journal of Ceramic Processing Research
• /
• 제19권6호
• /
• pp.461-466
• /
• 2018

The effects of Ca/Sr ratio and the sintering temperature on the properties of $(Ca_xSr_{(1-x)})ZrO_3$ (CSZ) ceramics were investigated in this study. CSZ ceramics were prepared using solid-state reaction process, which were sintered in air at temperatures ranging from $1350^{\circ}C$ to $1450^{\circ}C$. Their structures were characterized by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM). The change in Ca/Sr ratio significantly affected the crystalline phase and the dielectric properties of the $(Ca_xSr_{(1-x)})ZrO_3$ ceramics. The secondary phase, $Ca_{0.15}Zr_{0.85}O_{1.85}$, was observed and increased correspondingly with the rising of sintering temperatures. In order to understand the effects of secondary phase on the dielectric properties of CSZ ceramics, the $Ca_{0.15}Zr_{0.85}O_{1.85}$ phase was prepared individually using solidstate method. The $Ca_{0.15}Zr_{0.85}O_{1.85}$ ceramics sintered at $1500^{\circ}C$ for 2 hours possessed a dielectric constant (${\varepsilon}_r$) of 21.7, a dielectric loss ($tan{\delta}$) of $49.510^{-4}$ and an Insulation Resistance (IR) of $2.1{\times}10^{10}{\Omega}$. The ($Ca_{0.7}Sr_{0.3})ZrO_3$ ceramics exhibited the best dielectric properties, with a permittivity of 29, a dielectric loss ($tan{\delta}$) of $2.7{\times}10^{-4}$, and an Insulation Resistance (IR) of $2.6{\times}10^{12}{\Omega}$.