• 전자공학회논문지A
• /
• 제30A권5호
• /
• pp.30-35
• /
• 1993

We have investigated microwave dielectric properties of TiO$_{2}$ added (Pb$_{1-x}$Ca$_{x}$)ZrO$_{3}$ Ceramics with x=0.33, 0.35, and 0.37 sintered at 1400$^{\circ}C$ for 2 h. For additions of up to 3wt% of TiO$_{2}$ in (Pb$_{0.63}$ Ca$_{0.37}$)ZrO$_{3}$ (x=0.37), TiO$_{2}$ was completely soluble in (Pb, Ca)ZrO3 phase and did not affect the grain size of ceramics. Dielectric constant and temperature coefficient of resonant frequency increased due to the formation of solid solution, whereas Q value decreased linearly as TiO$_{2}$ increased up to 1 wt%. However, the dielectric loss was very high as TiO$_{2}$ exceeded 2 wt%. It was also shown that as Ca ion content in 0.5 wt% TiO$_{2}$ added (Pb$_{1-x}$,Ca$_{x}$)ZrO$_{3}$ decreased from x=0.37 to x=0.33, dielectric constant increased and Q value decreased.

• 한국재료학회지
• /
• 제30권4호
• /
• pp.176-183
• /
• 2020

The high-temperature stability of YSZ specimens fabricated by die pressure and cold isostatic press (CIP) is investigated in CaCl₂-CaF₂-CaO molten salt at 1,150 ℃. The experimental results are as follows: green density 46.7 % and 50.9 %; sintering density 93.3 % and 99.3 % for die press and CIP, respectively. YSZ foremd by CIP exhibits higher stability than YSZ formed by die press due to denseness dependency after high-temperature stability test. YSZ shows peaks mainly attributed to CaZrO₃, with a small t-ZrO₂ peak, unlike the high-intensity tetragonal-ZrO₂ (t-ZrO₂) peak observed for the asreceived specimen. The t-ZrO₂ phase of YSZ is likely stabilized by Y₂O₃, and the leaching of Y₂O₃ results in phase transformation from t-ZrO₂ to m-ZrO₂. CaZrO₃ likely forms from the reaction between CaO and m-ZrO₂. As the exposure time increases, more CaZrO₃ is observed in the internal region of YSZ, which could be attributed to the inward diffusion of molten salt and outward diffusion of the stabilizer (Y₂O₃) through the pores. This results in greater susceptibility to phase transformation and CaZrO₃ formation. To use SOM anodes for the electroreduction of various metals, YSZ stability must be improved by adjusting the high-density in the forming process.

• 자원환경지질
• /
• 제37권6호
• /
• pp.603-612
• /
• 2004

고준위 폐기물 내에 함유된 핵종을 고정화시킬 수 있는 매트릭스로써 파이로클로어$(pyrochlore;\;CaCeZr_xTi_{2-x}O_7,\;x=0.2\~2.0)$를 합성하여 상평형 관계 및 특성을 연구하였다. 합성방법은 CPS법이었으며, $1100\~1600^{\circ}C$에서 20시간 동안 가열하였다. 실험결과, 최적 합성조건은 각각의 조성에 따라 $1300\~1600^{\circ}C$로 다양하였다. 최적 합성조건에서 파이로클로어 또는 형석구조를 나타내는 산화물(이하 '형석'으로 기재)은 소량의 페롭스카이트와 더불어 $CeO_2$ 또는 $Ce_{0.75}Zr_{0.25}O_2$와 공존하였다. 또한 원조성인 $CaCeZr_xTi_{2-x}O_7$중 $x\leq0.6$인 경우 파이로클로어 구조가, 그리고 $x\geq0.6$에서는 형석구조가 안정한 것을 확인하였다. 특히 x값의 증가에 따라, Ca 및 Ti 성분이 결핍되었으며, 이와는 대조적으로 Zr과 Ce가 초과됨으로써 비화학양론적 조성을 나타내었다. 이러한 특성은 팔배위와 육배위를 차지하고 있는 원소들의 거동에 의한 것으로, 파이로클로어 또는 형석이 단일상이 아니라 페롭스카이트, $CeO_2$ 및 $Ce_{0.75}Zr_{0.25}O_2$와 공존하는 원인이 된 것으로 사료된다.

• 한국결정성장학회지
• /
• 제18권1호
• /
• pp.27-32
• /
• 2008

새로운 $CaZrO_3:Er^{3+}$ 축광성 형광체를 전통적인 고상반응법으로 제조하였으며, 분쇄한 축광성 형광체를 X 선 회절 분석, 광발광 분석, 열발광 분석과 휘도계를 통하여 장잔광 특성을 분석하였다. X 선 회절 분석 결과 순수한 $CaZrO_3$ 결정상을 확인 하였으며, 고온의 질소 분위기에서 합성한 경우 446 nm 와 550 nm의 넓은 발광 피크가 나타났다. 합성한 장잔광 특성의 형광체의 발광 지속시간은 254 nm UV lamp로 여기 시킨 후 어두운 곳에서 6시간 이상 스스로 발광 하였다. 발광 피크는 $Er^{3+}$ 이온의 $^5D_{5/2}{\rightarrow}^4F_{9/2},\;^2H_{12/2},\;^4S_{3/2}{\rightarrow}^4I_{13/2}$ 그리고 $^2G_{9/2}{\rightarrow}^4I_{13/2}$ 전이에 의한 것이며, 잔광 특성은 $CaZrO_3$ 격자 내에 적당한 trap center가 형성 된 것으로 판단된다.

• Journal of Ceramic Processing Research
• /
• 제19권6호
• /
• pp.504-508
• /
• 2018

Diopside is a ceramic material with excellent physical and chemical properties. However, when it is applied as an LED packaging material, heat dissipation of the LED element is not sufficient due to its relatively lower thermal conductivity, which may cause degradation of the LED function. In this study, glass-ceramics based on a $ZrO_2-CaO-MgO-SiO_2$ system, in which diopside is the main crystal phase, were prepared by heat-treating the glass, which was composed of zircon ($ZrO_2-SiO_2$) powders and diopside ($CaO-MgO-2SiO_2$) powders. The possibility of using the glass-ceramics as a packaging material for LEDs was then investigated by analyzing the density, shrinkage, thermal conductivity, and phases generated according to the amount of zircon powder added. The density and shrinkage of specimens decreased slightly and then increased again with the amount of $ZrO_2-SiO_2$ added within a range of 0~0.38 mol. Even though the crystal phase of zircon does not appear in the $ZrO_2-CaO-MgO-SiO_2$ system, the glass containing 0.38 mol zircon powder showed the highest thermal conductivity, 1.85 W/mK, among the specimens fabricated in this study: this value was about 23% higher than that of pure diopside. It was found that the thermal conductivity of the glass-ceramics based on a $ZrO_2-CaO-MgO-SiO_2$ system was closely related to the density, but not to the phase type. Zirconia ($ZrO_2$), a component oxide of zircon, plays an important role in increasing the density of the specimen. Furthermore the thermal conductivity of glass-ceramics based on a $ZrO_2-CaO-MgO-SiO_2$ system showed a nearly linear relationship with thermal diffusivity.

• 한국세라믹학회지
• /
• 제28권7호
• /
• pp.541-548
• /
• 1991

Sinterability and stability of TZP ceramics co-stabilized by 12 mol% CeO2 and divalent or trivalent oxides less than 1 mol% were investigated. Divalent and trivalent oxides increased stability of tetragonal ZrO2. 100% tetragonal ZrO2 phase was obtained by doping 12 mol% CeO2 and 0.2 mol% CaO and MgO respectively when sintering was carried out at 1500$^{\circ}C$ for 2 hours. Divalent and trivalent oxides improved sinterability and inhibit grain growth of ZrO2. And it was found that CaO was the most effective sintering aid and grain growth inhibitor for ZrO2 in this study. Incorporation of divalent and trivalent oxides into 12Ce-TZP increased the strength of 12Ce-TZP and particulary 12Ce, 0.4Ca-TZP exhibited a flexural strength of about twofold greater than 12Ce-TZP.

• 한국분말재료학회지
• /
• 제8권3호
• /
• pp.163-167
• /
• 2001

A bulk porous $CaZrO_3/MgO$ composite with plantinum nano-dispersion was synthesized in air atmosphere through the combination of several in situ reactions, including the pyrolysis of $PtO_2$. A mixture of $CaMg(CO_3)_2$(dolomite), $ZrO_2$, $PtO_2$ and LiF (0.5 wt%, as an additive) was cold isostatically pressed at 200 MPa and sintered at $1100^{\circ}C$ for 2 h. The porous $CaZrO_3/MgO/Pt$ composite ($CaZrO_3/MgO$ : Pt=99 : 1 in volume) had a uniformly open-porous structure (porosity: 56%) with three-dimensional (3-D) network and a narrow pore-size distribution, similarly to the porous $CaZrO_3/MgO$ composites reported before. Catalytic Properties (viz., NO direct decomposition and NO reduction by $C_2H_4$) of the $CaZrO_3/MgO/Pt$ composite were investigated up to $900^{\circ}C$. In the absence of oxygen, the NO conversion rate reached ~52% for the direct decomposition and ~100% for the reduction by $C_2H_4$, respectively. The results suggest the possibility of the porous composite as a multifunctional filter, i.e., simultaneous hot gas-filtering and $de-NO_x$ in one component.

• 한국전기전자재료학회논문지
• /
• 제28권2호
• /
• pp.80-84
• /
• 2015

We investigated the dielectric relaxation properties $0.5Ba(Zr_{0.2}Ti_{0.8})O_3-0.5(Ba_{0.7}Ca_{0.3})TiO_3$ ceramics with CuO addition. With increasing CuO addition, the lattice parameter was increased by substitution of small amount $Cu^{2+}$ ion in B-site of $0.5Ba(Zr_{0.2}Ti_{0.8})O_3-0.5(Ba_{0.7}Ca_{0.3})TiO_3$ ceramics. Also the grain size and the maximum dielectric constant of $0.5Ba(Zr_{0.2}Ti_{0.8})O_3-0.5(Ba_{0.7}Ca_{0.3})TiO_3$ ceramics was decreased with increasing amounts of CuO addition. Moreover, the diffused phase transition properties (${\gamma}$) of $0.5Ba(Zr_{0.2}Ti_{0.8})O_3-0.5(Ba_{0.7}Ca_{0.3})TiO_3$ ceramics was increased by compositional fluctuation with increasing of CuO amount, changed from 1.45 at 1 wt% CuO addition to 1.94 at 7 wt% CuO addition.

• 한국결정성장학회지
• /
• 제30권4호
• /
• pp.131-135
• /
• 2020

단결정상을 가지는 CaZrO₃ : Eu³⁺ 형광체를 스컬용융법으로 합성하였다. 합성된 형광체의 결정구조, 형태 및 광학적 특성은 XRD, SEM, UV 형광반응 및 PL을 분석하였다. 출발 원료는 CaO : ZrO₂ : Eu₂O₃를 0.962 : 1.013 : 0.025 mol%로 하여 냉각도가니에 충진하였다. 냉각도가니는 내부 직경 120 mm, 높이 150 mm이며, 혼합된 파우더 3 kg은 3.4 MHz의 출력 주파수로 1시간 이내에 완전히 용융되어 2시간 동안 유지시킨 후 자연냉각 시켰다. XRD 측정에서는 다른 결정상은 측정되지 않았으며 페로브스카이트 구조의 정방정계로 분석되었다. 합성된 형광체는 UV 광에 의해 여기 될 수 있고 방출 스펙트럼 결과는 615 nm에서 자기 쌍극자 전이 ⁵D₀→⁷F₂로 인해 CaZrO₃ : Eu³⁺의 밝은 적색 발광이 우세하였다.

• 한국주조공학회지
• /
• 제28권6호
• /
• pp.282-287
• /
• 2008

The effect of CaO mold on the formation of reaction layer was investigated. CaO mold was prepared by mixing of Colloidal silica($NALCO^{(R)}$ 1130) and an $ZrO_2$, CaO at room temperature. The dried at $20{\pm}3^{\circ}C$, 75% humidity for 12hrs. Sample was prepared from the Cp-Ti(grade-2) and melted by high frequence induction melting system in the vacuum condition. The react ion layer of Ti was confirmed by optical microscopy, microhardness(Hv) and X-ray diffraction. Thickness of reaction layer using the CaO stabilized ZrO2 was thinner than the CaO added ZrO2. And thickness of reaction layer were decreased with decreasing pH of slurry. CaO addition in the slurry could not controlled reaction between molten Ti and investment mold. On the other hand, the CaO chemical bonded ZrO2 by stabilization treatment could controlled reaction between molten Ti and investment mold.