• Journal of the Korean Society of Groundwater Environment
• /
• v.4 no.3
• /
• pp.130-143
• /
• 1997

To investigate geochemical characteristics and the sources of the dissolved ion species in the river water in the Han river drainage basin, samples were collected at 60 sites from the Han river drainage basin. The data for. pH, conductivity, TDS (total dissolved solid), temperature, and concentrations of dissloved ions were obtained as follows : (1) The geochemical characteristics of the surface water in the South and North Han river drainage basins are mainly controlled by bed rock geology in the drainage basin and in the main stream of the Han river considerably affected by anthropogenic pollution. The South Han river water samples have high concentrations of $Ca^{2＋}$ (ave. 15.42 ppm), $Mg^{2＋}$ (ave. 2.74 ppm), HC $O_3$$^{[-10]}$ (ave. 51.9 ppm), which evidently indicates that the bed rock geology in a limestone area mainly controls the surface water chemistry. The concentration of S $O_4$$^{2-}$ is remarkably high (SHR10-2 : 129.9 ppm) because of acid mine drainage from the metal and coal mines in the upper reaches of the South Han river. (2) The South Han river and the North Han river join the Han river. in the Yangsuri, Kyounggido and flow through Seoul metropolitan city. The mixing ratio is about 60:40 at the meeting point (sample number HRl0). (3) The result of factor analysis suggests that the pollution factor accounts for about 79% and the bed rock type factor accounts for about 7% of the data variation. This means that the geochemical characteristics of the Han river water mainly controlled by anthropogenic pollution in the South Han river and main stream of the Han river drainage basin. (4) The chemical data for four tributaries such as the Wangsukcheon, the Tancheon, the Zunuangcheon, and the Anyangcheon show that the concentration of pollution elements such as N $O_2$, C $l^{－}$, P $O_4$$^{3-}$, S $O_4$$^{2-}$ and Mn are high due to municipal waste disposal.

• Journal of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.484-495
• /
• 1989

Reactions of $(Et_4N)_2[MoOCl_5]$ with multidentate ligands containing nitrogen or/and oxygen donor atom (EDTA, DTPA, IDA, CyDTA, OX) produce a series of binuclear molybdate (V) complexes. The prepared Mo (V) complexes has been identified by Elemental Analysis, Infrared Spectra, Proton Magnetic Resonance Spectra, and Electronic Spectra. The electrochemical reduction mechanism has been studied by Cyclic voltammetry, Controlled Potential Coulometry, and Spectrophotometry in pH 3.571-10.375 acetate, borate, phosphate/sodium hydroxide, phosphate, ammonium/ammonia buffers. The cyclic voltammogram of the Mo-EDTA, DTPA, IDA, CyDTA complexes at pH < ca. 6.00 have shown two reduction waves. The first reduction wave shows two electron process and the second reduction wave shows two electron process. The cyclic voltammogram of the Mo-EDTA, DTPA, IDA, CyDTA complexes at pH < ca. 8.00 has shown one reduction wave. This reduction wave show four electron process. The cyclic voltammogram of the Mo-OX complex at pH < ca. 7.2 has shown one reduction wave. This reduction wave show four electron process.

• Journal of the Korean Ceramic Society
• /
• v.48 no.1
• /
• pp.26-33
• /
• 2011

The glass in the system of CaO-$SiO_2-P_2O_5$ and the corresponding glass-ceramics are prepared for bone cements and the behaviors of the hardening and hydroxyapatite formation were studied for the glass and glass-ceramic powders. The glass crystallized into apatite, $\alpha$-wollastonite and $\beta$-wollastonite depending on the glass composition when they were heat-treated at $950^{\circ}C$ for 4 h. A DCPD (dicalcium phosphate dihydrate : $CaHPO_4{\cdot}2H_2O$) was developed when the prepared glass and glass-ceramic powders were mixed with 3M-$H_3PO_4$ solution. The DCPD (Ca/P=1.0) transformed to HAp (Ca/P=1.67) when the bone cement was soaked in simulated body fluid (SBF), and this HAp formation strongly depended on the releasing capacity of $Ca^{2+}$ ions from the glass and glass-ceramic cements. The glass-ceramic bone cement containing $\alpha$-wollastonite crystals showed faster transformation of DCPD to HAp than other glass-ceramics containing $\alpha$- and $\beta$-wollastonite crystals. No hydroxyapatite was observed when the glass-ceramic bone cement containing apatite crystals (36P6C) was soaked in SBF even for 1 month, because no $Ca^{2+}$ ion can be released from the stable apatite crystals.

• YAKHAK HOEJI
• /
• v.12 no.3_4
• /
• pp.76-84
• /
• 1968

When 19-hydroxycholesterol acetate was added into CSD-10 in Nutrient Broth or in a mineral salts medium consisting of KH$_{2}$PO$_{4}$(0.1%), $K_{2}$HPO$_{4}$(0.1%), NH$_{4}$NO$_{3}$(0.1%), MgSO$_{4}$(0.02%), CaCl$_{2}$(0.002%), and FeCl$_{3}$(0.005%), a substantial amount of 19-hydroxyandrost-4-ene-3,17-dione was accumulated prior to accumulation of estrone. From this result and all of previous works, a tentative degradation pathway of 19-hydroxycholesterol acetate to estrone by CSD-10 was derived. 19-hydroxyandrost-4-ene-3,17-dione seems to be an attractive intermediate for the synthesis of 19-norsteroids.

• Membrane and Water Treatment
• /
• v.11 no.1
• /
• pp.69-77
• /
• 2020

Former studies revealed that sepiolite thermally treated at high temperature have high adsorption capacity for phosphate. However, its micron size (75 ㎛) limits its application to water treatment. In this study, we synthesized sepiolite impregnated polysulfone (PSf) beads to separate it easily from an aqueous solution. PSf beads with different sepiolite ratios were synthesized and their efficiencies were compared. The PSf beads with 30% impregnated sepiolite (30SPL-PSf bead) possessed the optimum sepiolite ratio for phosphate removal. Kinetic, equilibrium, and thermodynamic adsorption experiments were performed using the 30SPL-PSf bead. Equilibrium adsorption was achieved in 24 h, and the pseudo-first-order model was suitable for describing the phosphate adsorption at different reaction times. The Langmuir model was appropriate for describing the phosphate adsorption onto the 30SPL-PSf bead, and the maximum adsorption capacity of the 30SPL-PSf bead obtained from the model was 24.48 mg-PO₄/g. Enthalpy and entropy increased during the phosphate adsorption onto the 30SPL-PSf bead, and Gibb's free energy at 35 ℃ was negative. An increase in the solution pH from 3 to 11 induced a decrease in the phosphate adsorption amount from 27.30 mg-PO₄/g to 21.54 mg-PO₄/g. The competitive anion influenced the phosphate adsorption onto the 30SPL-PSf bead was in the order of NO₃^- > SO₄^2- > HCO_3^-. The phosphate breakthrough from the column packed with the 30SPL-PSf bead began after ~2000 min, reaching the influent concentration after ~8000 min. The adsorption amounts per unit mass of 30SPL-PSf and removal efficiency were 0.775 mg-PO₄/g and 61.6%, respectively. This study demonstrates the adequate performance of 30SPL-PSf beads as a filter for phosphate removal from aqueous solutions.

• Microbiology and Biotechnology Letters
• /
• v.41 no.2
• /
• pp.145-152
• /
• 2013

The culture conditions to maximize the production of endoglucanase (EC 3.2.1.4) from the brown rot fungus Fomitopsis pinicola MKACC 54347 mycelia were investigated. Among the tested media for endoglucanase production, Mandel's mineral salts medium (MSM; 1% cellulose, 0.1% peptone, 0.14% $(NH_4)_2SO_4$, 0.03% urea, 0.2% $KH_2PO_4$, 0.03% $MgSO_4{\cdot}7H_2O$, 0.03% $CaCl_2$, and 0.1% trace metal solution (19.8 mM $FeSO_4$, 13.0 mM $MnSO_4$, 12.2 mM $ZnSO_4$, and 15.4 mM $CoCl_2$)) produced the highest activity of the enzyme. To optimize the medium composition for enzyme activity, the effects of various carbon, nitrogen, phosphorus, and inorganic sources were investigated in MSM. Maximal enzyme production was accomplished using a medium containing 2% carboxymethyl cellulose (CMC), 2% yeast extract, 0.2% $KH_2PO_4$, 0.03% $MnSO_4$, and 0.3% trace metal solution. Different physiological conditions, like incubation period and temperature, were also examined to assess their influence on enzyme production. Enzyme production from F. pinicola reached its highest level after cultivation for 8 days at $25^{\circ}C$. Nondenaturing polyacrylamide gel electrophoresis (PAGE), followed by the endoglucanase activity staining using CMC as the substrate, was performed to identify the endoglucanase under the culture conditions studied. Zymogram analysis of the culture supernatant revealed an endoglucanase band with a molecular mass of 52 kDa. The optimum pH and temperature for enzyme activity were $55^{\circ}C$ and pH 5.0, respectively.

• Microbiology and Biotechnology Letters
• /
• v.21 no.5
• /
• pp.486-493
• /
• 1993

A gram(+) bacteria that produced microbial flocculant was isolated from soil and classified as a Bacillus species and named as Bacillus sp. A56. The culture conditions of the strain for fluocculant production were studied in a shake flask. Optimum temperature and initial pH for flcculant production were 30C and 6.5, respectively. The optimized medium has gollowing composition: glucose 20g/l, NH4NO3 0.5g/l, K2HPO4 1.0g/l, KH2PO4 0.8g/l, MgSO4.7H2O 0.2g/l, MnSO4.4-6H2O 0.3g/l, CaCO3 0.5g/l, yeast extract 0.3g/l, tryptone 0.3g/l in tap water.

• Microbiology and Biotechnology Letters
• /
• v.17 no.4
• /
• pp.289-294
• /
• 1989

A bacterial strain capable of producing high level of extracellular xylanase was isolated from soil. The characteristics of the isolated strain No.236 were identified to be Bacillus stearothermophilus. The maximal xylanase production was observed in the medium containing 0.75% xylan, 0.35% yeast extract, 1.06% $K_2$HPO$_4$and 0.05% CaCO$_3$with initial pH of 6.5 when the strain was cultured at 5$0^{\circ}C$ for 28 hrs with reciprocal shaking. Hydrolysis of xylan by the xylanase revealed that xylose was the only product of the reaction. This suggested that the enzyme produced by Bacillus stearothermophilus No. 236 was an exe-acting xylanase.

• Journal of the Korean Ceramic Society
• /
• v.53 no.6
• /
• pp.670-675
• /
• 2016

Calcium phosphate crystallites were prepared by wet chemical method for use in artificial bone. In order to obtain ${\beta}$-tricalcium phosphate (TCP), nano-crystalline calcium phosphate (CaP) was precipitated at $37^{\circ}C$ and at $pH5.0{\pm}0.1$ under stirring using highly active $Ca(OH)_2$ in DI water and an aqueous solution of $H_3PO_4$. The precipitated nano-crystalline CaP solution was kept at $90^{\circ}C$ for the growth of CaP crystallites. Through the growing process of CaP crystallites, we were able to obtain various sizes of rectangular CaP crystallites according to the crystal growing times. Dry nano-crystalline CaP powders at $37^{\circ}C$ were mixed with dry macro-crystalline CaP crystallites and the shaped mixture sample was fired at $1150^{\circ}C$ to make a ${\beta}-TCP$ block. Several tens of nm powders were uniformly coated on the surface, which was comprised of powders of several tens of ${\mu}m$, using a vibrator. The mixing ratio between the nanometer powders and the micrometer powders greatly affected the mechanical strength of the mixture block; the most appropriate ratio of these two materials was 50 wt% to 50 wt%. The sintered block showed improved mechanical strength, which was caused by the solid state interaction between the nano-crystalline ${\beta}-TCP$ and the macro-crystalline ${\beta}-TCP$.

• Microbiology and Biotechnology Letters
• /
• v.18 no.6
• /
• pp.578-584
• /
• 1990

A microorganism capable of producing high level of extracelluar cyclomaltodextrin glucanotransferase(EC 2.4.1.19; CGTase) was isolated ’rom soil. The isolated strain No. 239 was identified as Bacillusstearothermophilus. The maximal CGTase production (about 7.0 unitslml) was observed in medium containing2% soluble starch, 0.5% defatted soybean meal, 0.1% NaH_2PO_4.2H_2O$ and 0.015% $ CaC_l2 $ with initial pH 7.0. The strain was cultured at $55^{\circ}C$ for 48 hr with reciprocal shaking. At 0.83% substrated concentration potato starch was the optimum substrate with 50.1% conversion to cyciodextrin (CD)after the reaction at $65^{\circ}C$ for 24 hr (CGTase 10 unitlg starch). Using soluble starch as substrate (5% substrate concentration, CGTase 10 unitlg starch), the maximum conversion of 40% was obtained at11 hr reaction, and the ratio of $\alpha-, \beta-$ and $\gamma$-CD production at this time were 1.0:1.3:0.4, respectively., respectively.