• Journal of the Korean Ceramic Society
• /
• v.45 no.10
• /
• pp.625-630
• /
• 2008

In the bone cement composed of dense granules of $\beta-Ca_3(PO_4){_2}(\beta-TCP)$ and $Ca(H_2PO_4){_2}H_2O$, the compressive strength, setting time and temperature rise were measured to observe the degradation of cement with respect to the stored days before setting. Decreases of compressive strength and temperature rise were observed, while setting time increased with respect to the stored days. The similar trends were repeated with the increase of temperature of storage. Such a change virtually meant the fading of the character of cement and it took place only when the two starting materials were mixed during storage. The degradation could be mitigated taking advantage of granular $\beta$-TCP instead of powdery one. The formation of $CaHPO_4$, which resulted from reaction with ambient humidity, was attributed to the degradation observed during storage. Dependence of the degradation behavior on mixing and temperature during storage was discussed in terms of the driving force for reaction of cement.

• Journal of Sericultural and Entomological Science
• /
• v.24 no.2
• /
• pp.43-54
• /
• 1983

In a field trial, the influence was studied by measurement of growth and leaf yields and chemical composition (in organic cations and anions and total nitrogen) with two nitrogen dressings (lower nitrogen treatment 25kg and higher nitrogen treatment 75kg urea/10a as the summer fertilizer) after the summer cutting. The results were as follows; 1. With increasingn nitrogen dressing, branch length and weight were enchanced. The fresh weight of leaves was higher to be 273.6kg/10a in the higher nitrogen treatment than in the lower nitrogen treatment on 20 September. 2. The moisture content of leaves lasted above 73% until on 30 August. Afterward it decreased sharply upto 63% on 20 September. In higher nitrogen treatment it was higher about 0.1∼1.8% than in lower nitrogen treatment. The increasing nitrogen dressings combined with leaf condition led to be soft until on 10 October. 3. Dry matter weight of leaves started decreasing around on 10 September, whereas that of branches increased until around 30 September indicating that the dry matter moved to branch and root from leaves. 4. The increase in Ca$\^$2+/ content was particularly evident, whereas the K$\^$+/ and Mg$\^$2+/ decreased with growth. The Ca$\^$2+/ content was much higher in the high nitrogen treatment than in the low nitrogen treatment. 5. With rapid decrease in total nitrogen and water in the leaves around the end of August, the Ca$\^$2+/ and Cl$\^$-/ which were higher in the lower part moved up to the upper part. Whereas the K$\^$+/, H$_2$PO$_4$$\^$-/ and SO$_4$$\^$2-/ which were higher in the upper part moved down to the lower part. 6. Total nitrogen content decreased sharply 3,200me/kg DM to 2,000me/kg DM at the end of August changing the maxmium content of total nitrogen from upper to lower part in the low nitrogen treatment on 12 September and in the high nitrogen treatment on 22 September, and an apex of branches was died and fallen 10 days after respectively. 7. The sum of cation in leaves (∑C) increased from 1400me/kg DM to 1600me/kg DM with growth, wherease that of anions (∑A) was approximatly the same during the whole growing season. As the result, the ionic balance (C-A) increased from 1000me/kg DM to 1200me/kg DM. 8. ∑C, ∑A and (C-A) were higher in the high nitrogen treatment than in the low nitrogen treatment due to be much higher of Ca$\^$2+/ content and higher of NO$\^$-/$_3$, SO$\^$2-/$_4$ and H$_2$PO$_4$$\^$-/ content.

• Korean Journal of Materials Research
• /
• v.12 no.9
• /
• pp.747-749
• /
• 2002

Hydroxyapatite powders were prepared after heating at $1250^{\circ}C$ by the direct reaction using oyster shells and $H_3$$PO_4$. Properties of hydroxyapatite powders were investigated as XRF, XRD, DTA, FT-IR, SEM. Only hydroxyapatite was observed in XRD powders which was heated at $1250^{\circ}C$ for 2 hours and there was no remained CaO in that sample. And the results of FT-IR of sample was confirmed hydroxyapatite. Sample was agglomerated together, but needle shape morphology was observed in powders heated at $1250^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.41 no.12 s.271
• /
• pp.921-928
• /
• 2004

Calcium phosphate powders have been prepared by using $Ca(OH)_2\;and\;H_{3}PO_4$ solution under various conditions such as pH, calcination temperature, and reaction time. ${\beta}-TCP({\beta}-tricalcium phosphate)$and HAp(hydroxyapatite) were synthesized at pH=5.21 and pH > 7.62, respectively. From XRD results, $Ca(OH)_2\;and\;H_{3}PO_4$ solution reacted quickly to form HAp, which was structurally stable up to 16h. Calcination temperature having good crystallinity is revealed to be at $1200^{\circ}C$. SEM analysis showed that ${\beta}-TCP$ and HAp with needle type were synthesized at pH 5.21 and pH 7.62, respectively. However, at pH 9.16, tiny and homogeneous HAp having sphere was prepared and rearranged to show needle morphology. HAp synthesized at pH 9.16 was utilized as bonechina body and calcined. The sample was analyzed its crystallinity, water absorbtion, color, and shape to check physical properties.

• Korean Journal of Microbiology
• /
• v.32 no.3
• /
• pp.182-185
• /
• 1994

Effects of nitrogen and carbon sources on the decolorization rate of poly R-478 dye by a white rot basidiomycete Coriorus versicolor IFO 30388 were examined. The fungus exhibited 87.2% of decolorization rate when it was cultured in the state of stationary in a nitrogen-limited medium (pH 4.5) which contained 2.0% glucose, 0.04% ammonium tartrate, 0.02% poly R-478 dye, 2% $KH_2PO_4$, 0.5% $MgSO_4{\cdot}7H_2O$, 0.1% $CaCl_2{\cdot}2H_2O$, 0.002% thiamine-HCl and 10 mM 2,2 dimethylsuccinate (sodium) at $28^{\circ}C$ for 10 days. Decolorization of the dye occurred in the presence of nitrogen source in the medium and decolorization rate increased rapidly after depletion of $NH_4^+$ from the medium.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.354-362
• /
• 2009

This study was performed to develop a suitable nutrient solution for standard rose substrate culture in a closed hydroponic system. 1/4, 1/2, 2/3 and 1 strength of the nutrient solution made by Japan National Institute of Vegetable and Tea Science (JNIVT) were supplied. The photosynthesis rate, quality and growth of cut flower were higher in the 1/2 and 2/3 strength of nutrient solution during high and low temperature period. Based on the above results, optimum nutrient solutions (UOS) were composed by nutrientwater (n/w) absorption ratio with 1/2S ($NO_{3^-}N$ 6.8, $NH_{4^-}N$ 0.7, $PO_{4^-}P$ 2.0, K 3.8, Ca 3.0, Mg 1.2, $SO_{4^-}S$ $1.2me{\cdot}L^{-1}$) at high temperature season and 2/3($NO_{3^-}N$ 9.7, $NH_{4^-}N$ 0.8, $PO_{4^-}P$ 2.2, K 5.0, Ca 3.9, Mg 1.5, $SO_{4^-}S$ $1.5me{\cdot}L^{-1}$) at low temperature season. The results of suitability examination showed that the EC level in newly composed nutrient solution (UOS) was more stable than other nutrient solutions due to its large amount of calcium and potassium. The growth of cut flower cultivated with UOS was higher than those of other nutrient solutions. Especially, the yield of cut flowers in UOS nutrient solution increased 1.4 times than that of other nutrient solution treatments. Consequently, the new nutrient solution investigated in this experiment was suitable for rose cultivation in a closed hydroponic system.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.169-178
• /
• 1998

The crystal phases precipitated in various compositions glass of CaO-$SiO_2-P_2O_5$ system, were identified by XRD. E composition (CaO 49.4, $SiO_2\;36.8,\;P_2O_5$ 8.8 wt%) glass in which both apatite(($Ca_{10}(PO_4)_6O$ and $\beta$-wollastonite($CaSiO_3$) crystals would precipitate by heating, was selected as an experimental composition to prepare the glass ceramics with high bending strength and good bioactivity to the living bone. Glass powders of E composition were unidirectionally crystallized at $1050^{\circ}$C in the temperature-gadient furnace and the resultant glass ceramics were characterized. Bending strength of the glass ceramics was also measured. To investigate the bond forming ability between the glass ceramics and living bone tissue, soaking test of glass ceramics in simulated body fluid was carried out. Densed glass ceramics composed of apatite and $\beta$-wollastonite crystal were prepared by unidirectional crystallization under the optimum conditions. (2 0 2) plane of $\beta$-wollastonite crystals tended to grow perpendicularly to the crystallization direction. Average bending strength of this glass ceramics was 186.9 MPa, higher than that of the glass ceramics prepared by isothermal (not directional) crystallization In soaking test, a thin layer of apatite crystallite was formed on surface of the glass ceramics in 3 days. Apatite crystals formed on the glass ceramics could be act a role to make the chemical bond between the glass ceramics and living bone tissue.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.6
• /
• pp.238-242
• /
• 2016

The effect of the alkali, alkali earth metal elements on selective catalytic reduction(SCR) catalyst deactivation behavior were investigated in terms of microstructure, surface area, pore volume and De-NOx test. Poisoned SCR catalyst were manufactured by injection of $K_2CO_3$, $Na_2CO_3$, $Ca(CH_3COO)_2{\cdot}H_2O$, $C_4H_6MgO_4{\cdot}4H_2O$, $H_3PO_4$ solutions in the new SCR catalyst at $350^{\circ}C$ for 6 hours. New and poisoned catalysts surface were similar. But specific surface area, pore volume decrease from Na, Mg, K, Ca, P compared to new SCR catalyst. Especially, Na poisoned catalyst surface area and pore size extremely decreased by $10.20m^2/g$, $0.061cm^2/g$. De-NOx test results of new and poisoned catalysts at $150{\sim}450^{\circ}C$ indicated that alkali metal (K, Na) poisoned SCR catalysts have the lowest De-NOx efficiency, alkali earth metal poisoned SCR catalysts (Ca, Mg) De-NOx efficiency are higher than alkali metal poisoned SCR catalysts. P poisoned SCR catalyst De-NOx efficiency is similar new SCR catalyst. It were considered that physical deactivation of SCR catalyst was affected by SCR catalyst surface area and pore volume change.

• Microbiology and Biotechnology Letters
• /
• v.27 no.6
• /
• pp.433-439
• /
• 1999

Among microorganisms isolated from soil, YJ-66 strain was the best producer of flocculant and was examined for flocculating ability in the active carbon and CaCl2. YJ-66 strain was the best producer of flocculant and was examined for flocculating ability in the active carbon and CaCl2. YJ-66 strain was identified to be a species belonging to the genus Achromobacter. The optimum culture condition for production of bioflocculant with the isolated strain was for 72hrs at 3$0^{\circ}C$ and pH7.5. The favorable carbon, nitrogen sources and inorganic salts for production of the flocculant were sucrose, peptone, MgSO4 and KH2PO4, whose optimal concentrations were 2%. 0.067%, 0.1% and 0.1%, respectively. Addition of the carbon and inorganic salts significantly increased the production of flocculant. Compositions of optimized culture medium for bioflocculant production by Achromobacter sp. YJ-66 were 2% sucrose, 0.067% peptone, 0.1% MgSO4 and 0.1% KH2PO4 in initial pH 7.5 during at 3$0^{\circ}C$ for 72hrs.

• Journal of Soil and Groundwater Environment
• /
• v.15 no.4
• /
• pp.39-45
• /
• 2010

In order to treat paddy soils contaminated by Pb, Cd, and As near the abandoned mine, $H_2PO_4$ was used for stabilization of Pb ($PO_4$/Pb mole ratio of 2/1). In addition, $CaCO_3$ and $FeSO_4$ were used as stabilizers for treating Cd and As (2% w/w), respectively. Leaching tests were conducted with artificial rain in the column to assess the heavy metal stabilization efficiency. The mass of heavy metals in the effluents passed through the columns were analyzed. The remaining heavy metals in the soils were also analyzed as Korean soil standard method, phytoavailability test and sequential extraction test. Lead in the effluent was not detected when $H_2PO_4$ was used as a stabilizer. This result suggests that $H_2PO_4$ is efficient for Pb stabilization. In addition results of sequential extraction scheme suggest that heavy metals are present as residual forms which is not easily extracted.