• The Korea Journal of Herbology
• /
• v.29 no.6
• /
• pp.63-71
• /
• 2014

Objectives : Lonicerae japonicae Flos(LJF) has been reported to exhibit anti-oxidant, anti-inflammatory, anti-viral, anti-rheumatoid properties. However, it is still largely unknown whether LJF inhibits the ultraviolet(UV)B-induced oxidative damage in human HaCaT keratinocytes. Therefore in this paper, we investigated the anti-oxidative capacity and protective effect of LJF against UVB-induced oxidative demage in human HaCaT keratinocytes. Methods : To evaluate the anti-oxidative activity of LJF extracts, we measured total phenolic contents, total flavonoid contents, antioxidant capacity, and superoxide scavenging activity. To give an oxidative stress to HaCaT cells, UVB was irradiated with $200mJ/cm^2$ to HaCaT cells. To detect the protective effect of LJF against UVB, we measured cell viability, DNA fragmentation and reactive oxygen species (ROS) production. In addition, we performed high-performance liquid chromatography (HPLC) analysis to find a major component of LJF. Results : LJF contained phenolic and flavonoid contents, and showed the anti-oxidant and superoxide scavenging activity. The UVB-induced oxidative conditions led to the cell death, DNA fragmentation and reactive oxygen species (ROS) production. However, pretreatment with LJF reduced oxidative conditions, including inhibition of cell death, DNA fragmentation and ROS production. In addition, we found out chlorogenic acid as major component of LJF. Conclusions : These results could suggest that LJF contained anti-oxidative contents and exhibited protective effects against UVB on human HaCaT keratinocytes. And the effective compound of LJF which could show protective activities against UVB is chlorogenic acid. Thus, LJF and chlorogenic acid would be useful for the development of drug or cosmetics treating skin troubles.

• Journal of the Korean Society of Food Culture
• /
• v.3 no.3
• /
• pp.309-317
• /
• 1988

The effects of $CaCl_2$, K-sorbate, and fermented fish sauces and blanching on the texture of Chinese cabbage of Kimchi were evaluated. The addition of salt-fermented shrimp or salt-fermented anchovy accelerated the pH reduction, acidity increase and reducing sugar consumption, but K-sorbate, Ca-chloride and blanching suppressed the ripening process of Kimchi. The latter retarded the softening rate of Chinese cabbage during Kimchi fermentation, as demonstrated by the cutting force, compression force, recovered height and work ratio. The sensory evaluation confirmed the results of instrumental texture measurments. The instrumental measurements, i.e. pH, acidity cutting thickness, cutting force and compression test parameters, showed acidity acidity was calculated as % lactic acid attributes, i.e. the preferences for taste, appearance and texture, and the level of crispiness, hardness, chewiness and fibrousness. The pH of Kimchi was appeared to be an important quality parameter, whiih had significant correlations with the taste, appearance, chewiness, hardness, fibrousness and crispiness.

• Resources Recycling
• /
• v.12 no.1
• /
• pp.33-40
• /
• 2003

Mn was extracted by using a nitric acid from the reduced ferromanganese dust and the basic experiments were taken to refine the manganese nitrate solution by means of precipitation of Ca, Mg oxalate. The dust was generated in AOD process producing a medium-low carbon ferromanganese and collected in the bag filter. Manganese oxide content in the dust was about 90% and its phase was confirmed as $Mn_3$$O_4$. $Mn_3$$O_4$ in the dust was reduced to MnO by roasting with activated charcoal. The main impurities in the extracted solution prepared by leaching the reduced dust with nitric acid were Na, K, Fe, Si, Ca, Mg etc. Among them, Fe was removed by controlling pH of the solution more than 4 and precipitating $Fe(OH)_3$, simultaneously silicious material solved in the solution was removed by co-precipitation with the ferric hydroxide. Addition of 150 g reduced dust into 4N HNO3 solution 1$\ell$ was appropriate to control the pH of the solution to pH 4. To differ greatly the solubilities of manganese oxalate and calcium or magnesium oxalate in a solution containing a high concentration of Mn, pH of 4 or less and addition of ($NH_4$)$_2$$C_2$$O_4$ in equivalent with Ca and Mg are recommended. At this time, the higher temperature was the shorter the precipitation reaction time was needed.

• Korean Journal of Food Science and Technology
• /
• v.38 no.1
• /
• pp.42-46
• /
• 2006

Rheological properties of the dough added with milk proteins and gums was studied to investigate the possibilities as anti-staling agents. Also, physical properties of the resultant bread baked from the frozen dough after 8 weeks of storage at $-20^{\circ}C$ were examined. The 4 sets of their combinations of milk proteins and gums, $casein-{\kappa}-carrageenan$ (CK), casein-sodium alginate (CA), $whey-{\kappa}-carrageenan$ (WK), and whey-sodium alginate (WA), were added to dough to examine their possible anti-staling effects. Rheological properties of dough were evaluated, and physical properties of resultant bread baked from frozen dough after 8 weeks storage at $-20^{\circ}C$ were examined. Addition of all treatments increased gelatinization temperature and water absorption, and lowered miximum viscosities and extension of doughs, compared to the control. Doughs added with CA and WA showed longer development times than that of the control. Addition of WK and WA resulted in lowest dough extensions. Treated bread showed lower moisture content decrease during storage at $5^{\circ}C$ for 4 days. Breads baked with frozen doughs after 6 weeks storage at $-20^{\circ}C$ showed similar results. Although textural hardness of breads increased with storage at $5^{\circ}C$, CA- and WA-added breads were less affected, showing they effectively retarded staling of breads.

• The Korean Journal of Rheology
• /
• v.11 no.1
• /
• pp.50-56
• /
• 1999

Melt blends of polyamide 6 (PA 6) with polyester elastomer (PEL) were prepared in a corotating twin screw extruder using two types of coupling agent(CA), viz. diglycidyl ether of bisphenol A (DGEBA) and 1,4-phenylene bis(2-oxazoline) (PBO). Notched impact strength of PA 6 as well as PA 6/PEL blends increased with the addition of coupling agent, especially with DGEBA and the maximum impact toughening of the blend was obtained with 0.6%(by mol) DGEBA, where a minimum domain size was observed from SEM. Melt viscosities of the untreated blends were higher than those of base resins at low frequencies. Viscosities of base resins as well as blends increased with the addition of CA, and the effect was much more pronounced with DGEBA, especially for PA 6 and PA 6-rich blends.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.1
• /
• pp.19-24
• /
• 2007

The effects of $B_2O_3-SiO_2-R(R;CaO,\;BaO,\;ZnO,\;Bi_2O_3)$ borosilicate glass system on the sintering behavior and microwave dielectric properties of ceramic/glass composites were investigated as functions of modifier, glass addition ($30{\sim}50\;vol%$) and sintering temperature ($500{\sim}900^{\circ}C$ for 2 hrs). The addition of 50 and 45 vol% glass ensured successful sintering below $900^{\circ}C$. Sintering characteristics of the composites were well described in terms of modifier. Borosilicate glass enhanced the reaction with $Al_{2}O_{3}$ to form pores, second phases and liquid phases, which was responsible to component of modifier. Dielectric constant (${\varepsilon}_{r},\;Q{\times}f_{o}$) and temperature coefficient of resonant frequency (${\tau}_{f}$) of the composite with 50 and 45 vol% glass contents($B_{2}O_{3}:SiO_{2}:R=25:10:65$) demonstrated A-CaBS(7.8, 2,560 GHz, -81ppm/$^{\circ}C$), A-BaBs(5.8, 3.130 GHz, -64 ppm/$^{\circ}C$), A-ZnBS(5.7, 17,800 GHz, -21 ppm/$^{\circ}C$), A-BiBs(45 vol% glass in total)(8.3, 2,700 GHz, -45 ppm/$^{\circ}C$) which is applicable to substrate requiring an low dielectric properties.

• Analytical Science and Technology
• /
• v.13 no.3
• /
• pp.351-356
• /
• 2000

The decolorization of wastewater and the collecting conditions of final sludge from hanji production were investigated. Black wastewater (50 mL) from the process cooking with NaOH could be effectively decolorized by 2.0 g of $Ca(OCl)_2$ So, if excess bleach $Ca(OCl)_2$ used in bleaching process were recycled, the decolorization of wastewater by adding less $Ca(OCl)_2$ would be successfully realized. However, the decolorization by electrolyzed oxidation was ineffective. The final sludge could be effectively collected by polymer coagulator, but the addition of $Al_2(SO_4)_3$ was required, and the pure fibrous sludge could not be collected. Therefore, surfactants such as triethanolamine and Triton X-100 were used instead of polymer coagulator. The collecting yield was obtained about 85% as good as those by polymer coagulator. When mixed surfactants were used in collecting the final sludge, $Al_2(SO_4)_3$ was not required. In addition, as the pure fibrous sludge could be collected, the effective recycling of sludges would be done.

• Safety and Health at Work
• /
• v.2 no.1
• /
• pp.17-25
• /
• 2011

Objectives: In this study, the in vitro mammalian chromosomal aberration (CA) assay was conducted to gain additional information concerning the hazards associated with the use of cyclopentane and ammonium nitrate. While these two chemicals had already been tested by many methods, they had not been studied in the CA test. Methods: The assay was performed using the ovarian infantile cell (CHO-K1 cell), by the direct method (-S9) and by the metabolic activated method (+S9 mix). Results: Using the direct method, the 7 dosages in a 48 hour treatment group did not show that the frequency of CA is proportion to the dosage addition. The frequency of CA is not proportion to the dosage addition for a 6 hour treatment using the metabolic activated method. Conclusion: From these findings, it was decided that the 2 chemicals do not induce chromosomal aberrations under the tested conditions.

• Electrical & Electronic Materials
• /
• v.10 no.3
• /
• pp.239-246
• /
• 1997

The ZnO is stabilize dielectric constant over a broad temperature range because its addition makes the relaxation time short. In this study, the composite oxide material (B $a_{0.85}$ $Ca_{0.15}$)Ti $O_{3}$ was mixed by ZnO additive material and the dielectric polarization characteristics was studied. The relative density was over 90[%] at all specimen in the structural characteristics. Among of the specimen, the relative density of (B $a_{0.85}$ $Ca_{0.15}$)Ti $O_{3}$ with ZnO (0.4mol) has a 95[%]. The grain size of composite oxide material with an increasing ZnO increased and it was 1.0[.mu.m]-1.22[.mu.m]. In the electrical characteristics, the charge and discharge current was increased by ZnO addition. The dielectric relaxation time was increased by space charge polarization at above 110[.deg. C] and the dielectric relaxation time was fixed by space charge polarization of para-dielectric layer at below 110[.deg. C]. The dielectric relaxation time was maximum when the grain size was small. The dielectric relaxation time is decreased with an additive material ZnO and interface polarization, existing void at the grain and grain boundary. The remnant polarization is increased and the coercive electric field is decreased by ZnO.

• Journal of the Korean Ceramic Society
• /
• v.34 no.2
• /
• pp.123-130
• /
• 1997

In this study, (Sr.Pb.Ca)TiO3-Bi2O3.3TiO2(SPCT) systems were investigated to develop a new material which has a high dielectric constant, a low dielectric loss and a small TCC(Temperature Coefficient of Capa-citance), and are suitable for high voltage applications as a function of the additions of Bi2O3.3TiO2 from 5 mol.% to 9 mol.%. The result obtained from our investigation showed that up to 6 mol.% Bi2O3.3TiO ad-dition the dielectric constant increased and it deteriorated at higher concentrations with increasing amount of the acicular grains. As a result of some dopants (SiO2, Nb2O3, MnO2) addition to SPCT, the specimens with MnO2 showed good dielectric properties. The dielectric constant decreased, but the TCC was improved with the addition of MnO2 from 0.15 wt.% to 0.45 wt. %.