• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.8
• /
• pp.1266-1271
• /
• 2007

This study examined effects of calcium supplemented milk on bone loss in ovariectomized rats. Twenty four Sprague-Dawley female rats, 7 weeks-old, were divided into 4 groups, ovariectomized and fed diets containing: 1) control, no Ca supplemented milk, 2) ovx 1, Ca carbonate supplemented milk, 3) ovx 2, ionized Ca supplemented milk, and 4) ovx 3, nano Ca supplemented milk. All rats were fed 1 ml of milk containing 20 mg supplemented Ca. After 18 wk feeding, body weight gain and food efficiency ratio were significantly different between ovx 1 and ovx 3. Serum concentration of calcium and phosphorus were not different among groups. However, there was a significant difference in calcium content of dry femoral weight in ovx 3 compared with the control and ovx 2. In addition, femoral bone mineral density ($g/cm^2$) was significantly greater in ovx 3 than in other groups (p<0.05). The ovx 3 group showed the highest stiffness (N/mm), maximum energy (N) in femur and trabecular bone area (%). The present study indicated that nano Ca supplementation in milk may be an effective way to enhance bone calcium metabolism for ovariectomized rats.

• Journal of Korea Foundry Society
• /
• v.17 no.6
• /
• pp.592-597
• /
• 1997

The microstructure and tensile properties of Mg-Zn-Ca and Mg-Zn-Mn-Ca alloys have been investigated. The alloys were obtained by melting in a low carbon crucible coated with boron nitride under an Ar gas atmosphere to prevent oxidation and combustion. The Mg alloy melt was cast into the metallic mold at room temperature, and cooling part was located at the bottom of mold. The phase formed during solidification of the Mg-Zn-(Mn) alloys containing 0.5%Ca is $Ca_2Mg_6Zn_3$. The yield strength and ultimate tensile strength of the alloys increased with increasing Zn content, but the ductility did not change with increasing Zn content. The addition of Mn improves the yield strength and ultimate tensile strength of the alloys, but the ductility did not change. Tensile fracture of the alloys revealed brittle failure, with cracking along the $Ca_2Mg_6Zn_3$ phase. The variation of stress with strain obeyed the relationship of the ${\sigma}=K{\varepsilon}^n$.

• Electrical & Electronic Materials
• /
• v.7 no.6
• /
• pp.534-542
• /
• 1994

Microstructures and dielectric properties of (Sr$_{1-x}$ .Ca$_{x}$)TiO$_{3}$+0.006Nb$_{2}$O$_{5}$ (0.05.leq.x.leq.0.2) ceramic were investigated. The specimens fired in a reducing atmosphere(N$_{2}$) were painted on the surface with CuO paste, and then annealed at 1100.deg. C for 2 hr. SEM and EDAX revealed that CuO penetrated rapidly into the bulk along the grain boundaries during the annealing. Grain size increased with increasing Ca content up to 15[mol%], but decreased with further addition. In the specimens with 10-15[mol%l of Ca, excellent dielectric properties were obtained as follows; dielectric constant <25000, dielectric loss(tan .delta[%]) <0.3[%] and capacitance change rate with temperature <.+-.[%], respectively. All the specimens in this study exhibited dielectric relaxation with frequency as a function of the temperature. The dispersive frequency was over 10$^{6}$ [Hz].z].

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.5
• /
• pp.30-35
• /
• 1993

We have investigated microwave dielectric properties of TiO$_{2}$ added (Pb$_{1-x}$Ca$_{x}$)ZrO$_{3}$ Ceramics with x=0.33, 0.35, and 0.37 sintered at 1400$^{\circ}C$ for 2 h. For additions of up to 3wt% of TiO$_{2}$ in (Pb$_{0.63}$ Ca$_{0.37}$)ZrO$_{3}$ (x=0.37), TiO$_{2}$ was completely soluble in (Pb, Ca)ZrO3 phase and did not affect the grain size of ceramics. Dielectric constant and temperature coefficient of resonant frequency increased due to the formation of solid solution, whereas Q value decreased linearly as TiO$_{2}$ increased up to 1 wt%. However, the dielectric loss was very high as TiO$_{2}$ exceeded 2 wt%. It was also shown that as Ca ion content in 0.5 wt% TiO$_{2}$ added (Pb$_{1-x}$,Ca$_{x}$)ZrO$_{3}$ decreased from x=0.37 to x=0.33, dielectric constant increased and Q value decreased.

• Journal of Korea Foundry Society
• /
• v.32 no.1
• /
• pp.44-49
• /
• 2012

In this study, three magnesium alloys were investigated; those are 1.5wt.% CaO added AM80, 1.0wt.% CaO added AM60, and conventional MRI153 alloys. Test specimens of three alloys were prepared by re-melting and casting into steel mold with ingots and machining. The mechanical properties and the creep behavior at 150 degrees Celsius of these specimens were determined and their microstructures were characterized using OM and SEM. For the application to die-casting, fluidity test were carried out with spiral mold. Compared with 1.0wt.% CaO added AM60 alloy, 1.5wt.% CaO added AM80 alloy exhibited good creep properties in all test conditions. Moreover, CaO added alloys showed better creep properties than MRI153 alloy at lower load condition. It is proposed that 1.5wt.% CaO added AM80 alloy is useful to apply to power-train parts such as transmission case in vehicles.

• Journal of Korean Society on Water Environment
• /
• v.25 no.4
• /
• pp.515-521
• /
• 2009

In this study, the applicability of $CaCO_3$ as a seed material for crystallization reaction was tested. $CaCO_3$ was ground to lesser than 425 mesh and was made to media mixed with binder. Batch experiment was to investigate the ${PO_4}^{3-}-P$ removal efficiency of different parameters such as $CaCO_3$ dosage and binder ratio, size, type and mass of media. In addition, the effect of phosphorus removal from wastewater was tested using a lab-scaled crystallization reactor. At the results of the batch test, phosphorus removals were improved with increasing $CaCO_3$ dosage and media mass but were decreased with increasing media size. Moreover, phosphorus removals were influenced by specific surface area but media type. The average T-P and ${PO_4}^{3-}-P$ removal efficiency in a lab-scaled crystallization reactor with $CaCO_3$ media for wastewater were shown to be 60.2% and 60.3% for 18 days of operation time.

• Journal of Korea Foundry Society
• /
• v.30 no.6
• /
• pp.224-230
• /
• 2010

To prevent oxidation of Mg melt, $SF_6$ gas has been generally used for Mg alloys during melting and casting as a cover gas. The use of $SF_6$ gas, however, will be restricted owing to its crucial impact on global warming. Non-$SF_6$ process during melting and casting in diecasting industry has been proved with Eco-Mg alloys by a simple addition of small amount of CaO into Mg alloys. This paper shows non-$SF_6$ diecasting procedures for 0.7wt% CaO added AZ91D Eco-Mg alloys. Cold-chamber diecasting was performed under $CO_2$ atmosphere without $SF_6$ gas. An increment of mechanical properties, especially strength and ductility of Eco-Mg alloys is, in part, due to high-quality melt, refined grain size and $Al_2Ca$ second phase strengthening. Microstructures and mechanical properties of 0.7wt% CaO added AZ91D Eco-Mg alloys are evaluated in comparison with those of conventional AZ91D Mg alloy.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1589-1591
• /
• 2003

The microwave dielectric properties of $TiTe_3O_8-CaF_2$ ceramics were investigated. All sample of $TiTe_3O_8-CaF_2$ ceramics were prepared by the conventional mixed oxide method, and sintered in the temperature of $730^{\circ}C{\sim}750^{\circ}C$. The structural properties of $TiTe_3O_8-CaF_2$ ceramics were investigated by the X-ray diffractor meter. According to the X-ray diffraction patterns of $TiTe_3O_8-CaF_2$ ceramics, the major phase of the cubic $TiTe_3O_8$ were presented. In the case of $1molTiTe_3O_8-0.1molCaF_2$ ceramics sintered at $740^{\circ}C$ for 5hr., the bulk density, dielectric constant, quality factor were $2.8g/cm^3$, 39.1, 36.100GHz, respectively.

• Resources Recycling
• /
• v.20 no.3
• /
• pp.55-61
• /
• 2011

In order to develop economical production process from metallurgical grade silicon(MG-Si) to solar grade(SOG-Si), removal of boron by slag treatment was investigated at 1823 K using CaO-$SiO_2$ based slags. In the present study boron removal ratio in CaO-$SiO_2$ stags and $CaCO_3-SiO_2$ slags were increased to 63% and 73% respectively with slag basicity (%CaO/$%SiO_2$). However, bubbling time with Ar gas of slag and metal was not affected on removal ratio of boron. The addition of $Na_2CO_3$ to CaO-$SiO_2$ slags did not improve the removal ratio of boron from molten silicon. Boron contend was decreased from 20.6 ppm to 1.03 ppm by three times treatment using $CaCO_3-SiO_2$ slag (basicity=1.2).

• The Korean Journal of Physiology and Pharmacology
• /
• v.13 no.4
• /
• pp.327-335
• /
• 2009

The aim of this study was to determine whether losartan, an angiotensin II (Ang II) type 1 ($AT_1$) receptor could influence the CA release from the isolated perfused model of the rat adrenal medulla. Losartan (5${\sim}$50 ${\mu}$M) perfused into an adrenal vein for 90 min produced dose- and time-dependent inhibition of the CA secretory responses evoked by ACh (5.32 mM), high $K^+$ (56 mM, a direct membrane depolarizer), DMPP (100 ${\mu}$M) and McN-A-343 (100 ${\mu}$M). Losartan failed to affect basal CA output. Furthermore, in adrenal glands loaded with losartan (15 ${\mu}$M) for 90 min, the CA secretory responses evoked by Bay-K-8644 (10 ${\mu}$M, an activator of L-type $Ca^{2+}$ channels), cyclopiazonic acid (10 ${\mu}$M, an inhibitor of cytoplasmic $Ca^{2+}$ -ATPase), veratridine (100 ${\mu}$M, an activator of $Na^+$ channels), and Ang II (100 nM) were markedly inhibited. However, at high concentrations (150${\sim}$300 ${\mu}$M), losartan rather enhanced the CA secretion evoked by ACh. Collectively, these experimental results suggest that losartan at low concentrations inhibits the CA secretion evoked by cholinergic stimulation (both nicotininc and muscarinic receptors) as well as by membrane depolarization from the rat adrenal medulla, but at high concentration it rather inhibits ACh-evoked CA secretion. It seems that losartan has a dual action, acting as both agonist and antagonist to nicotinic receptors of the rat adrenal medulla, which might be dependent on the concentration. It is also thought that this inhibitory effect of losartan may be mediated by blocking the influx of both $Na^+$ and $Ca^{2+}$ into the rat adrenomedullary chromaffin cells as well as by inhibiting the $Ca^{2+}$ release from the cytoplasmic calcium store, which is thought to be relevant to the $AT_1$ receptor blockade, in addition to its enhancement of the CA release.