• Journal of the Korean Society for Heat Treatment
• /
• v.33 no.3
• /
• pp.129-134
• /
• 2020

Due to excellent properties such as high specific strength and low density, application of magnesium alloys have been rapidly increased. However, magnesium alloy has a serious problem that is easily oxidized when exposed to high-temperature. For this reason, magnesium alloys have been generally used for SF6 gas such as protective cover gas in casting and melting, but it has been reported that this gas has a serious influence on global warming. Therefore, many researchers have been studied to improve the oxidation resistance of magnesium alloy. It was reported that addition of Be, Ca and CaO in magnesium alloy can improve the oxidation properties. In this study, the possibility of improving the oxidation resistance by adding CaO extracted from oyster shells was investigated. Oyster shells were completely decomposed into CaO and CO₂ by annealing. With the addition of CaO, a coexistence region of MgO + CaO was formed in the oxide layer and its thickness was also reduced.

• Journal of Korea Foundry Society
• /
• v.31 no.2
• /
• pp.60-65
• /
• 2011

Molten magnesium alloys and magnesium products are easily oxidized and burned when they are exposed to high temperature for manufacturing process and by accident. In order to solve these problems, CaO addition in magnesium alloys has been developed. The ignition resistance of CaO added Mg-3Al, Mg-6Al, and Mg-9Al Eco-Mg alloys were investigated in comparison with those of magnesium alloys without CaO. The ignition resistance was examined by three methods : DTA, furnace chip ignition test, and torch ignition test. DTA was carried out for obtaining quantitative ignition temperature data with respect to specimen geometry and test environment; the furnace ignition test for burr and chip ignition temperature data; and the torch test for ignition temperature data for manufactured products. The ignition resistance of magnesium alloys under all conditions greatly increased by CaO addition.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.3
• /
• pp.243-247
• /
• 2005

In this study, in order to develop low temperature sintering ceramics for ultrasonic vibrator application, PNW-PMN-PZT system ceramics were manufactured according to the amount of CaCO$_3$ addition, and their piezoelectric, dielectric and microstructural characteristics were investigated. The ceramic specimens could be sintered at sintering temperature below 1000 $^{\circ}C$ due to the effect of Li$_2$CO$_3$-CaCO$_3$ liquid phase produced by the reaction of Li$_2$CO$_3$ and CaCO$_3$. At 0.2 wt% Li$_2$CO$_3$ and 0.25 wt％ CaCO$_3$ added specimen sintered at 920 $^{\circ}C$, the density, electromechanical coupling factor(k$_{p}$), mechanical quality factor(Q$_{m}$) and dielectric constant showed the optimal value of 7.78 g/㎤, 0.49, 1396, and 1300, respectively, for ultrasonic vibrator application.ion.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.167-170
• /
• 2000

Proteolytic hydrolysis is one of the main enzymatic reaction of waste activated sludge (WAS) digestion. Pretense excreted from Bacillus stearothermophilus (ATCC 31197) showed optimum temperature of $75^{\circ}C$ for maxium heat stable proteolytic activity against azo casein. The dependency of $Ca^{2+}$, $Zn^{2+}$ on heat stability of proteolytic enzymes were measured with various concentrations. It was shown that $Ca^{2+}$ ion enhanced heat stability of these enzymes. Then thermophilic aerobic digestion (TAD) was performed using B. sterothermophilus with the addition of divalent ions. Performance of TAD process with ATCC 31197 activated by $Ca^{2+}$, $Zn^{2+}$ions in terms of dissolved organic carbon (DOC) concentration, extracellular protein concentration, and scanning electrion microscopy (SEM) analysis. The best result of protein reduction concentration in digestion test was obtained with the addition of 2 mM $Ca^{2+}$ ion.

• Journal of the Korean institute of surface engineering
• /
• v.40 no.5
• /
• pp.225-233
• /
• 2007

Effects of alloying elements on the corrosion layer formation of Pb-grid/active materials interface has been researched for improvement of corrosion resistance of Pb-Ca alloy. For this research, various amounts of alloying elements such as Sn, Ag and Ba were added to the Pb-Ca alloys and investigated their corrosion behaviors. Batteries fabricated by using these alloys as cathode grids were subjected to life cycle test. Overcharge life cycle test was carried out at $75^{\circ}C$, 4.5 A, for 110 hrs. with KS standard (KSC 8504). And then, after keeping the battery with open circuit state for 48 hr, discharge was carried out at 300A for 30 sec. Corrosion morphology and interface between Pb-grid and active materials were investigated by using ICP, SEM, WDX, and LPM. Corrosion layer of Pb-Ca alloy got thicken with increasing Ca content. For Pb-Ca-Sn alloy, thickness of corrosion layer decreased as Sn and Ag content increased gradually. In case of Pb-Ca-Sn-Ba alloy, thickness of corrosion layer decreased up to 0.02 wt% Ba addition, whereas, it was not changed in case of above 0.02 wt% Ba addition.

• Journal of the East Asian Society of Dietary Life
• /
• v.15 no.2
• /
• pp.219-225
• /
• 2005

Effect of blanching and/or $CaCl_2$ addition on the quality characteristics of Oiji prepared by dry salting method, which has been used for industry, was investigated. Control$(15\%\;salt),\;CAO(15\%\;salt\;+\;0.04\%\;CaCl_2)$ and BCO $(15\%\;salt\;+\;0.04\%\;CaCl_2+blanching\;at\;60^{\circ}C\;for\;20\;min)$ for 165 days. Acidity was lower, but pH was higher in BCO than in the control or CAO. During the whole period of storage, greenness(-a) of BCO was maintained in Hunter color system, compared with the other groups. The numbers of total microbes, lactic acid bacteria and yeast were the lowest in BCO, while the highest in control. Moreover, texture profile analysis exhibited that fracturability and hardness maintained the highest in BCO during storage, compared with the other groups. Based on these results, combination of blanching and $CaCl_2$ addition is favorable to extend the shelf life and to maintain the good quality.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.3
• /
• pp.456-465
• /
• 2004

$K^+$ efflux through a certain type of $K^+$ channels causes the change of membrane potential and leads to cAMP synthesis in the transmembrane cell signaling for the initiation of sperm motility in the salmonid fishes. The addition of $Ca^{2+}$ conferred motility to the trout sperm that were immobilized by external $K^+$ and other alkaline metals, $Rb^+$ and $Cs^{2+}$, suggesting the participation of external $Ca^{2+}$ in the initiation of sperm motility. L-type $Ca^{2+}$ channel blockers such as nifedipine, nimodipine, and FS-2 inhibited the motility, but N-type $Ca^{2+}$ channel blocker, w-conotoxin MvIIA, did not. On the other hand, the membrane hyperpolarization and cAMP synthesis were suppressed by $Ca^{2+}$ channel blockers, nifedipine, and trifluoroperazine. Furthermore, these suppressions were relieved by the addition of $K^+$ ionophore, valinomycin. Inhibitors of calmodulin, such as W-7, trifluoperazine, and calrnidazol-C1, inhibited the sperm motility, membrane hyperpolarization, and cAMP synthesis. The results suggest that $Ca^{2+}$ influx through $Ca^{2+}$ channels that are sensitive to specific $Ca^{2+}$ channel blockers and calmodulin participate in the changes of membrane potential, leading to synthesis of cAMP in the cell signaling for the initiation of trout sperm motility.

• Journal of Korea Foundry Society
• /
• v.22 no.5
• /
• pp.257-264
• /
• 2002

Effects of Ca content on the refinement of primary Si of Aluminum B390 alloy have been examined. Ca was found to have an effect on the refinement of primary Si particle. Primary Si particle size has been refined as Ca content of the melts decreased and cooling rate increased. A control of Ca content by the addition of $CuCl_2$ to the melt was the most efficient in the refinement of primary Si particles. The minimum size of primary Si particles in this study was $15.0\;{\mu}m$ when a residual content of Ca element in the alloy was 5ppm, Primary Si particle size was refined as primary Si crystallization temperature increased, which was attributed to the decrease of Ca content in the melts.

• Journal of the Korean Ceramic Society
• /
• v.30 no.10
• /
• pp.871-879
• /
• 1993

Effects of K2SO4 and Na2SO4 on C3S formation and its microstructure were investigated. C3S formation was not influenced by addition up to 6.0wt% of K2SO4 as SO3 base, however it was prevented by only 1.0wt% of Na2SO4 addition. C3S prevention by added Na2SO4 was the reason why C2S stabilized by Na+ and SO42- could not react to C3S. Added K2SO4 appeared as K2SO4, however added Na2SO4 appeared as the form of Na2xCa3-xAl2O6, (Na0.8Ca0.1)SO4 and Na2SO4 in interstitial phase.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2006.04a
• /
• pp.41-44
• /
• 2006

The objective of this study was to evaluate the stabilization of As and heavy metals in tailings from the Samkwang Au-Ag mine with $Ca(OH)_2$. In order to evaluate the stabilization ability of As and heavy metals in the tailings, column test was implemented with various conditions as 1) particle size of $Ca(OH)_2$, 2) mixing method and 3) flow rate of eluents during 60 days. The results showed that addition with 5% of $Ca(OH)_2$ in 1kg of the tailings had the most effective ability of stabilization up to 95%. In addition, stabilization ability of As and heavy metals in tailings was enhanced using a fine powder of $Ca(OH)_2$. Therefore, stabilization technology can be used as a remediation of As and heavy metals in mine wastes including tailings and a nearby soils from abandoned metal mines.