• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.495-498
• /
• 2006

The influence of various process parameters for the as-deposited poly silicon was investigated. The polycrystalline silicon films were successfully deposited on glass substrates at a low-temperature $(<200^{\circ}C)$ using the catalytic chemical vapor deposition (Cat-CVD). We achieved a low hydrogen content $({\sim}0.9%)$ and a high deposition rate $({\sim}35{\AA}/sec)$. The film is applicable to thin film transistors on plastic substrates.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.905-908
• /
• 2000

The growth properties of diamond grain were examined by Raman spectroscopy and microscope images. Diamond thin films were prepared on single crystal Si wafers by microwave Plasma chemical vapor deposition. Preparation conditions, substrate temperature, boron concentration and deposition time were controlled differently. Prepared diamond thin films have different surface morphology and grain size respectively Diamond grain size was gradually changed by substrate temperature. The biggest diamond grain size was observed in the substrate, which has highest temperature. The diamond grain size by boron concentration was slightly changed but morphology of diamond grain became amorphous according to increasing of boron concentration. Time was also needed to be a big diamond grain. However, time was not a main factor for being a big diamond grain. Raman spectra of diamond film, which was deposited at high substrate temperature, showed sharp peaks at 1334$cm^{-1}$ / and these were characteristics of crystalline diamond. A broad peak centered at 1550$cm^{-1}$ /, corresponding to non-diamond component (sp$^2$carbon), could be observed in the substrate, which has low temperature.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2003년도 추계학술발표회초록집
• /
• pp.54-54
• /
• 2003

DLC films were deposited on Si(100) substrates by inductively coupled plasma (ICP) assisted chemical vapor deposition (CVD). A mixture of acetylene (C$_2$H$_2$) and argon (Ar) gases was used as the precursor and plasma source, respectively. The structure of the films was characterized by the Raman spectroscopy. Results from the Raman spectroscopy analysis indicated that the property change of the DLC films is due to the sp$^3$ and sp$^2$ ratio in the films under various conditions such as ICP power, working pressure and RF substrate bias. The hydrogen content in the DLC films was determined by an electron recoil detector (ERB). The roughness of the films was measured by atomic force microscope (Am). A microhardness tester was used for the hardness and elastic modulus measurement. The DLC film showed a maximum hardness of 37㎬. In this work, the relationship between deposition parameters and mechanical properties were discussed.

• Carbon letters
• /
• 제1권3_4호
• /
• pp.170-177
• /
• 2001

Lithium intercalated carbon (LIC) are basically employed as an anode for currently commercialized lithium secondary batteries. However, there are still strong interests in modifying carbon surface of active materials of the anode because the amount of irreversible capacity, charge-discharge capacity and high rate capability are largely determined by the surface conditions of the carbon. In this study, the carbonaceous materials were coated with tin oxide and copper by fluidized-bed chemical vapor deposition (CVD) method and their coating effects on electrochemical characteristics were investigated. The electrode which coated with tin oxides gave the higher capacity than that of raw material. Their capacity decreased with the progress of cycling possibly due to severe volume changes. However, the cyclability was improved by coating with copper on the surface of the tin oxides coated carbonaceous materials, which plays an important role as an inactive matrix buffering volume changes. An impedance on passivation film was decreased as tin oxides contents and it resulted in the higher capacity.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.561-561
• /
• 2012

Graphene, two dimensional single layer of carbon atoms, has tremendous attention due to its superior property such as fast electron mobility, high thermal conductivity and optical transparency, and also found many applications such as field-effect transistors (FET), energy storage and conversion, optoelectronic device, electromechanical resonators and chemical sensors. Several techniques have been developed to form the graphene. Especially chemical vapor deposition (CVD) is a promising process for the large area graphene. For the electrically isolated devices, the graphene should be transfer to insulated substrate from Cu or Ni. However, transferred graphene has serious drawback due to remaining polymeric residue during transfer process which induces the poor device characteristics by impurity scattering and it interrupts the surface functionalization for the sensor application. In this study, we demonstrate the characteristics of solution-gated FET depending on the removal of polymeric residues. The solution-gated FET is operated by the modulation of the channel conductance by applying a gate potential from a reference electrode via the electrolyte, and it can be used as a chemical sensor. The removal process was achieved by several solvents during the transfer of CVD graphene from a copper foil to a substrate and additional annealing process with H2/Ar environments was carried out. We compare the properties of graphene by Raman spectroscopy, atomic force microscopy(AFM), and X-ray Photoelectron Spectroscopy (XPS) measurements. Effects of residual polymeric materials on the device performance of graphene FET will be discussed in detail.

• Bulletin of the Korean Chemical Society
• /
• 제34권11호
• /
• pp.3312-3316
• /
• 2013

Single crystals of hexagonal graphenes were successfully grown on Cu foils using the atmospheric pressure chemical vapor deposition (CVD) method. We investigated the effects of reaction parameters, such as the growth temperature and annealing time, on the size, coverage, and density of graphene domains grown over Cu foil. The mean size of the graphene domains increased significantly with increases in both the growth temperature and annealing time, and similar phenomena were observed in graphene domains grown by low pressure CVD over Cu foil. From the comparison of micro Raman spectroscopy in the graphene films grown with different annealing times, we found that the nucleation and growth of the domains were strongly dependent on the annealing time and growth temperature. Therefore, we confirmed that when reaction time was same, the number of layers and the degree of defects in the synthesized graphene films both decreased as the annealing time increased.

• 한국결정성장학회지
• /
• 제17권3호
• /
• pp.91-94
• /
• 2007

Vapor liquid solid 기구에 의한 열화학기상증착법을 이용하여 Si (001) 기판 위에 $SnO_2$ 나노와이어를 성장시켰다. Au 박막 (3 nm)을 성장을 위한 촉매로 사용하여 Si(001) 기판 이에 순수 SnO powder (purity, 99.9%)를 반응 원료로 대기압 하 $950{\sim}100^{\circ}C$ 온도 범위, $750{\sim}800\;sccm$ 아르곤 분위기에서 $SnO_2$ 나노와이어를 성장시켰다. X-ray diffraction 분석을 통해 성장한 $SnO_2$ 나노와이어가 tetragonal rutile 구조임을 확인하였고, transmission electron microscopy 분석을 통해 단일 나노와이어의 결정 특성을 분석하였다. 또한, 상온 photoluminescence 분석을 통해 나노와이어 샘플로부터 600 nm 부근에서 나타나는 defect level 천이에 의한 넓은 emission band를 확인함으로써 성장한 나노와이어 $SnO_2$임을 확인하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.115-115
• /
• 2003

Silica nanostructures have been attached considerable attention because of theirs potential application in mesoscopic research and the potential use of large surface area structure of catalysts. SiO2 nannowire and nanorods was synthesized various methods including thermal evaporation, chemical vapor deposition (CVD), and laser ablation methods. In this experiments, SiO2 nanowire were grown using thermal evaporation method followed by VS (Vapor-Solid) growth mechanisms. Grown SiO2 nanowires were amorphous phases because of its low growth temperatures. Grown nanowires diameters were about 20-40nm at all growth conditions, but its microstructres were different by that used substrate because of it's oxygen contents.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.150-150
• /
• 2003

wide bind gap과 wurtzite hexagonal structure를 가지고 있으며 청색 발광 및 청자색 레이저 특성을 보이는 III-V족 화합물반도체 GaN는 laser diodes (LD) 및 light emitting diodes (LED) 재료로 주목받고있는 주요 전자재료이다. 본 연구에서는 GaN를 chemical vapor deposition (CVD) 법을 이용하여 vapor-liquid-solid (VLS) mechanisum에 의하여 GaN나노와이어 형태로 성장시켰다. 기판은 (001)Si을 사용하였고 suputtering을 이용하여 GaN와 AlN의 double buffer layer (DBL)를 증착시켰으며 촉매로는 Ni을 사용하였다. 또한, 원료로는 고순도 Ga금속과 NH$_3$ gas를, carrier gas로는 Ar을 사용하여 GaN/AlN/(001)Si 위에 GaN 나노와이어를 성장시켰다. 성장된 GaN 나노와이어는 DBL의 두께, Ga source의 양, 튜브 안의 압력, 튜브 안의 위치 등의 제 공정변수에 따라 tangled, straight 등의 다양한 형상을 보였으며 지름은 약 30~100 nm, 길이는 수 $\mu\textrm{m}$로 관찰되었다. GaN나노와이어의 결정성, 형상 및 발광특성 등을 x-ray diffraction (XRD), photoluminesence (PL), scanning electron microscope (SEM), transmision electron microscope (TEM) 등을 이용하여 측정하였으며 제 공정변수와의 상관관계를 규명하였다.

• 한국세라믹학회지
• /
• 제32권1호
• /
• pp.37-44
• /
• 1995

TiO2 fine powders were synthesized using oxygenolysis and hydrolysis reaction of TiCl4 vapor in gas phase. The TiO2 powder synthesized showed morphological differences depending on reaction system as follows: TiCl4-O2 reaction system produced the monosized particles having polyhedral shape with well-defined crystal planes and the particles did not agglomerate into secondary particles. TiCl4-H2O reaction system, whereas, produced the spherical secondary particles which consisted of fine primary particles. Other powder characteristics such as particle size, impurity content and rutile content are also reported in this study.