• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제37권
• /
• pp.11.1-11.5
• /
• 2015

Rapid palatal expansion(RPE) with the tooth-born appliance is not sufficient to apply to the patients with periodontal problem or insufficient tooth anchorage, and it leads to tipping of the anchorage teeth and increasing teeth mobility and root resorption. To avoid these disadvantages, we present the case using palatal screws and custommade palatal expander. A 23-year-old patient underwent surgically assisted rapid maxillary expansion with the Hyrax expansion using 4 tent screws. The study models were used to measure the pre-/-post surgical width of the anterior and posterior dental arches with a digital sliding caliper. In the result, the custom-made palatal expander with 4 tent screws is suitable for delivering a force to the mid-palatal suture expansion. And it is low cost, small sized and simply applied. The results indicated that maxillary expansion with the custom-made palatal anchorage device is predictable and stable technique without significant complications in patients.

• 대한족부족관절학회지
• /
• 제10권2호
• /
• pp.125-132
• /
• 2006

Purpose: The purpose of this study was to evaluate pressure distribution on the foot with the use of custom made foot orthosis and evaluate influential factors in young people using custom orthosis. Materials and Methods: 22 individuals comprised of young males and females were evaluated by radiograph, pedobarograph, and satisfaction rate and VAS score. The data was analyzed statistically to find influential factors for satisfaction after wearing the foot orthosis. Results: Around 50% of participants were satisfied in wearing the custom made foot orthosis. Initial VAS score of satisfaction of $36.2{\pm}19.7$ improved to $73.1{\pm}15.6$ after application of foot orthosis. There was a statistically significant difference. Talo-second metatarsal angle on AP radiograph after orthosis application was significantly related to satisfaction. On analysis of pedobarograph data, total contact area was increased and weight distribution was transferred medially on ambulation with the orthosis applied. Conclusion: Before designing the foot orthosis, individual foot factors such as foot anatomy and foot pressure distribution should be evaluated for foot comfort and better patient satisfaction.

• 한국전자거래학회지
• /
• 제8권4호
• /
• pp.53-68
• /
• 2003

Currently, it is possible to buy almost anything from books(Amazon.com) to airplane tickets(Travelocity.com) using the world wide web. The purpose of this research is to develop a "clean interface" between design and fabrication facilities for the production of custom machined parts through Internet. The current mechanism for production of prototype parts that can be fabricated using standard machine tools like milling machines, requires a process of part description preparation, bidding, contract award, and finally fabrication and delivery of the part. This is a substantially more complex process than buying a book or airplane ticket. In this paper, we try to define the ambiguous part description using XML based data exchange format and to enable e-commerce in this field. The research accomplishments are summarized: 1. Creation of a new format for data exchange of machined prototype parts, 2. Development of a prototype system to illustrate how the XML data can be effectively used to conduct e-Commerce for custom machined parts, 3. Testing of the methodology with a number of parts.

• 대한방사선치료학회지
• /
• 제7권1호
• /
• pp.92-96
• /
• 1995

All patients who will Undergo irraidiation of the oral cavity cancer will need dental before and during Radiotherapy. The extent of the region and the presence of numerous critical normal tissues(mucosa, gingiva, teeth and the alveolar ridge, alveolar bony structure, etc) in the oral cavity area, injury to which could result in serious functional impairment. Therefore I evaluate the Usefulness of custom-made intraoral shielding device before and during Radiotherapy in oral cavity cancer. Materials and Methods(1) : Manufacture process of Custom-made intraoral shielding device Containing Cerroband. A. Acquisition of impression B. Matrix Constitution C. Separation by Separator D. Sprincle on method E. Trimming F. Spacing G. Fill with Cerroband Materials and Methods (2) A. Preannealing B. TLD Set up C. Annealing D. TLD Reading = Results = Therefore dosimetric characteristics in oral cavity by TLD Compared to isodose curve dose distribution Ipsilateral oral mucosa, Contralateral oral mucosa, alveolar ridge, tongue, dose was reduced by intraoral shielding device containning Cerroband technique Compard to isodose plan = Conclusions = The custom-made intra-oral shielding device containing Cerroband was useful in reducing the Contralateral oral mucosa dose and Volume irradiated.

• 한국정보통신학회논문지
• /
• 제5권2호
• /
• pp.309-313
• /
• 2001

본 논문에서는 Custom Power 응용을 위한 전압 안정화 특성을 갖는 다기능 3상 전자식 강압형 변압기가 제안된다. 제안된 전자식 변압기는 다음과 같은 특징을 갖는다. 1) 무게가 1㎾ 기준 일반 변압기의 40% 수준이다. 2) PWM 제어에 의하여 입력전압의 변동에 무관한 출력전압을 유지하는 전압 안정화 기능을 갖는다 3) 전원 또는 부하단의 Emergency에 대하여 회로 차단기의 기능도 갖는다. 4) 부하에 최초 전원 공급시, 낮은 전압으로부터 점진적으로 증가시켜가면서 전원을 인가하여, 전원 투입시 발생할 수 있는 돌입전류나 과도 충격을 제거할 수 있다. 그 밖에 무부하시 전원차단 기능과, 왜곡된 입력전압에 대한 보상기능을 추가 할 수 있다. 본 논문에서는 제안된 강압형 전자식 변압기의 회로 구성과 특징을 설명하고, 이를 PSPICE 시뮬레이션을 통하여 동작특성을 보인다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권1호
• /
• pp.67-76
• /
• 2012

Due to the increasing amount of applications of power electronic ac-dc converters, it is necessary to design a single-stage converter that can reliably perform both buck and boost operations. Traditionally, this can be achieved by double-stage conversion (ac/dc-dc/dc) which ultimately leads to less efficiency and a more complex control system. This paper discusses two types of modern ac-dc converters. First, the novel impedance-source ac-dc converter, abbreviated as custom Z-source rectifier, is analyzed; and then, switched inductor (SL) Z-source ac-dc converter is proposed. This paper describes the Z-source rectifiers' operating principles, the concepts behind them, and their superiorities. Analysis and simulation results show that the proposed custom Z-source rectifier can step up and step down voltage; and the main advantage of the SL Z-source ac-dc converter is its high step-up capability. Low ripple of the output dc voltage is the other advantage of the proposed converters. Finally, the SL Z-source ac-dc converter is compared with the custom Z-source ac-dc converter.

• 농촌지도와개발
• /
• 제28권4호
• /
• pp.167-174
• /
• 2021

This study analyzed the feasibility of custom work service to deal with the imbalance of farm labor supply due to population aging. The economic feasibility analysis is based on the case of Bonghwang-myeon in Naju-si, where the majority of farm work is entrusted to local agricultural cooperative. To assess the project profitability and economic feasibility based on the projected cash flow for the next ten years, Return On Investment (ROI), Net Present Value (NPV), and Internal Rate of Return (IRR) of the projects were calculated. The results showed that ROI is estimated at 13.7%, and NPV and IRR are KRW 1,504,932,000 and 15.6%, respectively, with a discount rate of 4.5%, indicating a good enough profitability. Furthermore, a sensitivity analysis with government support as part of an assumption showed that without the support, NPV turns negative, implying that the project is not profitable, and that government support for at least 30% of the cost is needed to secure the economic feasibility of a project. Hence, to promote agricultural work entrustment, it is necessary for the government to partly support the agricultural machinery and facility costs, which require a considerable amount of initial investment.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권3호
• /
• pp.459-468
• /
• 2021

This study examines the factors influencing custom officers' readiness for the Sales and Service Tax (SST) implementation in Malaysia. Specifically, this study examines the factors stipulated in the Theory of Organisational Readiness namely, change valence, task knowledge, and resource availability on the customs officers' readiness in terms of change commitment and change efficacy for SST 2.0 implementation. This study utilizes the questionnaire survey distributed to employees of the Royal Malaysian Customs Department (RMCD) that have undergone a significant change of tax regime from Goods and Service Tax (GST) to SST 2.0. The results show that all three factors significantly and positively influence the customs officers' readiness in terms of change commitment and change efficacy for SST 2.0 implementation in Malaysia. The findings in this study indicate that to ensure smooth SST 2.0 implementation, it is important for the customs department to give attention to the perception of the officers and provide the necessary resources. The findings of this study could assist RMCD and other custom agencies to take into account factors that influence readiness for change which indirectly affect job responsibility and performance of the organization.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 추계학술대회
• /
• pp.222-224
• /
• 2022

객체 분할 분야의 딥러닝 기반 컴퓨터 비전 응용들은 성능을 향상하기 위하여 STOA 기법들이 사전학습하여 배포한 하이퍼파라미터와 모델을 통해 학습하는 전이학습 방법을 사용한다. 이 과정에서 사용되는 커스텀 데이터 셋들은 Ground Truth 정보를 생성하기 위한 라벨링 작업에서 시간이나 라벨러등의 많은 자원을 필요로 한다. 본 고에서는 딥러닝 신경망에서 사용되는 커스텀 데이터 셋 구축을 위하여 시간이나 라벨러등의 자원을 적게 사용할 수 있도록 객체 분할 기법을 활용한 자동 라벨링 구축 방법을 제시한다.

• Current Optics and Photonics
• /
• 제8권5호
• /
• pp.484-492
• /
• 2024

In response to the difficulty of synchronously obtaining multiwavelength images for fast two-dimensional (2D) temperature measurement, a multispectral framing imaging optical system is designed, based on the segmented-aperture imaging method and asymmetric surface shape. The system adopts a common-aperture four-channel array structure to synchronously collect multiwavelength temperature-field images. To solve the problem of asymmetric aberration caused by being off-axis, a model of the relationship between incident and outgoing rays is established to calculate the asymmetric custom surface. The designed focal length of the optical system is 80 mm, the F-number is 1:3.8, and the operating wavelength range is 0.48-0.65 ㎛. The system is divided into four channels, corresponding to wavelengths of 0.48, 0.55, 0.58, and 0.65 ㎛ respectively. The modulation transfer function value of a single channel lens is higher than 0.6 in the full field of view at 35 lp/mm. The experimental results show that the asymmetric-custom-surface imaging system can capture clear multiwavelength images of a temperature field. The framing imaging system can capture clear images of multiwavelength temperature fields, with high consistency in images of different wavelengths. The designed optical system can provide reliable multiwavelength image data for 2D temperature-field measurement.