• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제36권4호
• /
• pp.262-269
• /
• 2010

Introduction: Accurate diagnosis and treatment planning are very important for orthognathic surgery. A small error in diagnosis can cause postoperative functional and esthetic problems. Pre-existing 2-dimensional (D) chephalogram analysis has a high likelihood of error due to its intrinsic and extrinsic problems. A cephalogram can also be inaccurate due to the limited anatomic points, superimposition of the image, and the considerable time and effort required. Recently, an improvement in technology and popularization of computed tomography (CT) provides patients with 3-D computer based cephalometric analysis, which complements traditional analysis in many ways. However, the results are affected by the experience and the subject of the investigator. Materials and Methods: The effects of the sources human error in 2-D cephalogram analysis and 3-D computerized tomography cephalometric analysis were compared using Simplant CMF program. From 2008 Jan to 2009 June, patients who had undergone CT, cephalo AP, lat were investigated. Results: 1. In the 3 D and 2 D images, 10 out of 93 variables (10.4%) and 11 out 44 variables (25%), respectively, showed a significant difference. 2. Landmarks that showed a significant difference in the 2 D image were the points frequently superimposed anatomically. 3. Go Po Orb landmarks, which showed a significant difference in the 3 D images, were found to be the artificial points for analysis in the 2 D image, and in the current definition, these points cannot be used for reproducibility in the 3 D image. Conclusion: Generally, 3-D CT images provide more precise identification of the traditional cephalometric landmark. Greater variability of certain landmarks in the mediolateral direction is probably related to the inadequate definition of the landmarks in the third dimension.

• 대한물리의학회지
• /
• 제16권3호
• /
• pp.81-87
• /
• 2021

PURPOSE: This study compared the cross-sectional areas (CSA) of the cervical muscles of straight neck patients and normal participants during a craniocervical flexion exercise (CCFE) using computerized tomography (CT) to investigate the effects of CCFE on the cervical curve. METHODS: Eighteen subjects were recruited for this study. Nine subjects were allocated to the straight neck group (subjects with pain and a cervical lordosis angle of less than 20°); the remainder formed the control group (subjects with a cervical lordosis angle greater than 20°). The CSA of the subjects' neck flexors (longus colli, longus capitis, and sternocleidomastoid) were measured by CT during rest and CCFE in the supine position, and the range of motion (ROM) of neck flexion was measured using a C-ROM instrument in a sitting. RESULTS: The straight neck group had a significantly smaller CSA of the longus colli, longus capitis, and sternocleidomastoid than the control group (p < .05). Both the straight neck and control groups showed statistically significant increases in the CSA of the neck flexors during CCFE compared to that at rest (p < .05). In addition, the straight neck group showed a significantly smaller ROM of neck flexion than the control group (p < .05). CONCLUSION: The results of this study provide more concrete evidence for therapists by demonstrating that CCFE improves the neck function by strengthening the neck flexors and increasing the neck stability for straight neck patients. Therefore, it is necessary to perform CCFE and neck extension exercises to rehabilitate straight neck patients.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권6호
• /
• pp.566-574
• /
• 2006

Purpose : This study was performed to provide an anatomical information of the mandibular ramus for the successful inferior alveolar nerve block. Three dimensional images were reconstructed from the computerized tomography (CT) and the anatomical evaluation of the mandibular ramus was done. Materials and methods : Sixty-four patients who had been taken the facial CT scans from 2000, Jan to 2003, June was selected. The patients who had the anterior or posterior teeth misssing, edentulous ridge, and jaw fracture were excepted. In the occulusal plane, the lingual surface angle (LSA) between the mid-sagittal plane and the mandibular molar lingual surface from the 2nd premolar to the 2nd molar, the inner ramal surface angle (IRSA), the maximum inner ramal surface angle (MxIRSA), and the outer ramal surface angle (ORSA) to the-mid sagittal plane were measured. The inner ramal surface angle in the ligular tip level (IRSA-L) and the outer ramal surface angle in the ligular tip level (ORSA-L), the ramal length (RL), and the anterior ramal length (ARL) were also measured in the lingular tip level. Results : In the lingular tip level, the mean IRSA-L and ORSA-L were $28.6{\pm}6.3^{\circ}$ and $17.9{\pm}4.9^{\circ}$ respectively. The larger was the IRSA, the larger was the ORSA. In the lingular tip level, the mean ramal length was 35.8${\pm}$3.4 mm. The larger was the IRSA-L, the shorter was the ramal length. On the lingular tip level, the mean anterior ramal length from anterior ramus to lingular tip was 19.6${\pm}$3.3 mm. when the ramal length was longer, the anterior ramal length was also longer. On the lingular tip level, there was positive correlation vetween the IRSA and the ORSA, negative correlation between the IRSA and the ramal length, and positive correlation between the ramal length and the lingular tip level to the anterior ramus. There was no statistical meaning of data between sex and age. Conclusion : In the clinical view of the results so far achieved, if the direction of needle is closer to posterior it is able to contact bone on lingular tip when the internal surface of ramus is wided outer.

• 한국정보처리학회논문지
• /
• 제5권12호
• /
• pp.3275-3284
• /
• 1998

본 논문에서는 각종 단층 촬영 의료영상 장비로 촬영한 2차원 단면화상 데이터들을 차원 재구성 알고리즘을 사용하여 3차원 영상으로 재구성한 다음, 웹 서버의 데이터베이스에 저장하고 관리하며, 인터넷 가상현실 표준언어인 VRML(Virtual Reality Modeling Language)로 표현된 3차원 의료영상을 비롯한 각종 의료영상 정보를 웹브라우저를 사용하여 검색해 볼 수 있는 의료영상정보시스템(Medical Image Information System)에 관하여 기술한다. 본 연구를 통하여 개발한 의료영상정보시스템에서는 단층 촬영된 2차원 단면화상을 처리한 다음, 3차원 의료 영상을 생성하기 위하여 표면기반 랜더링 방법(Surface-based Rendering Method)을 사용하였다. 인터넷을 통하여 전송되는 영상파일의 크기를 줄이기 위하여 삼각형 매쉬(Triangle Meshes)을 이루는 다각형의 개수를 줄이는 알고리즘을 사용하며, 3차원 의료영상 데이터의 크기를 약 50%이상 줄일 수 있다. 아울러, 3차원 영상 데이터 파일을 압축을 하게 되면 파일의 크기를 80%이상 줄일 수 가 있으므로 웹상에서 신속하게 3차원 의료영상 데이터를 검색할 수 있고, 의료영상을 VRML을 사용하여 표현하므로 고성능의 그래픽 카드가 없는 일반 PC에서도 인터넷을 통하여 디스플레이 할 수 있다. 또한, CGI(Common Gateway Interface)방식을 사용하여 서버의 데이터베이스에 저장되어 있는 CT(Computerized Tomography), MRI(Magnetic Resonance Imaging), PET(Positron Emission Tomography), SPECT(Single Photon Emission Computed Tomography)등의 단층 촬영 장비로 촬영한 다양한 종류의 디지털 의료영상을 사용자에게 의료영상정보시스템을 통하여 2차원 단면화상 또는 3차원 영상으로 표현하여 보여주고, 환자에 관한 각종 정보와 진단정보 등을 신속하게 제공한다. 본 논문에서 제안하는 의료영상정보시스템은 초고속 정보통신 망을 통하여 원격의료시스템을 구축하는데 활용될 수 있을 것이다.

• 한국방사선학회논문지
• /
• 제2권3호
• /
• pp.5-9
• /
• 2008

전산화단층촬영(CT)에 있어서 생기는 artifact를 제거하기 위해서 영상재구성 과정에 다양한 필터를 사용하고 있다. 이러한 artifact는 영상재구성 과정에 사용되는 수학적 오차와, 투영이미지와 실제 해부학적 구조간의 오차, 혹은 데이터 획득과정에서의 오차 등으로 인해 필연적으로 생길 수 밖에 없다. 본 연구에서는 Hann필터를 사용하였을 때 CT 영상에서의 artifact 제거효과를 정량적으로 분석하였다. Cut-off 주파수가 0.1인 경우에서 0.2씩 증가시키며 0.9까지에 대한 다양한 cut-off 주파수의 Hann필터에 대한 artifact제거 효과에 대한 결과를 보였다. 재구성 영상에서의 artifact에 대한 정량적 분석을 위해서 white image에 대한 CT 영상의 Noise Power Spectrum을 비교하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.184-187
• /
• 2002

Two-dimensional (2-D) X-ray computerized tomography (CT) equipments are widely used in industrial and medical fields, and nowadays studies on reconstruction algorithm for 3-D cone-beam acquisition systems are active for better utilization. The authors recent-By have proposed a fast reconstruction aigorithm using tree-structured filter bank for 2-D C1, and shown the algorithm is applicable to an approximate reconstruction of 3-D CT. For exact 3-D CT reconstruction, however, we have to backproject 1-D signal into 3-D space. This paper proposes a fast implementation method for this back-projection by use of tree-structured filter bank. and shows the proposed method works approximately 700 times faster than the direct one with almost same reconstruction image quality.

• Journal of Gastric Cancer
• /
• 제10권4호
• /
• pp.254-258
• /
• 2010

Gastric lipomatosis is an extremely rare condition. We present a case of a 69-year-old woman admitted with epigastric soreness. Computerized tomography (CT) revealed extrinsically compressing, fat-containing mass lesions on the entire gastric wall of the antrum and body except for the lesser curvature. A subtotal gastrectomy was performed. Pathology findings confirmed a gastric lipomatosis with multiple gastric ulcerations and extensive disruptions of the muscular layers. This case and reports of other gastric lipomatosis cases indicate that CT should be used to characterize large submucosal masses because CT can show the specific nature and extent of the disease. We believe that surgical treatment is the most appropriate treatment for symptomatic gastric lipomatosis that shows extensive gastric involvement, or when there are multiple gastric lipomas.

• 생물정신의학
• /
• 제2권1호
• /
• pp.38-43
• /
• 1995

The application of neuroimaging techniques in psychiatry started in 1970s with the use of CT(computerized tomography). Neuroimaging methods can be categorized as anatomical and functional. Recently, attentions are focused on the functional neuroimaging methods those could give us various important informations. But results regarding to psychotropic medication effect on neuroimaging are not sufficient. Here, the study results of the medication effect with the functional imaging methods are mainly revieued.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 춘계학술대회
• /
• pp.465-468
• /
• 1997

A Study on Computer Assisted Diagnosis (CAD) system extract ing lung cancer part from Digital X-ray Computerized Tomography(CT) image is discussed in this paper. It is very crucial to segment the image of lung into the three organ area such as inside, outside and the hilum so that the variant image processing algorithm can be applied an each area respectively. In this paper, the efficient algorithm extracting lung cancer part is proposed with characterizing lung hilum part and its associated vessel patterns.

• Journal of Korean Neurosurgical Society
• /
• 제37권1호
• /
• pp.59-62
• /
• 2005

We describe two cases of tension pneumocephalus, one caused by ventriculoperitoneal shunt for communicating hydrocephalus, and the other caused by craniocerebral trauma. In the first case report, we examined the relationship between cerebrospinal fluid leakage and delayed onset tension pneumocephalus. The second case report, we addressed issues such as the diagnosis, management, and pathogenesis, as well as computerized tomography(CT) findings.