• 한국컴퓨터정보학회논문지
• /
• 제15권7호
• /
• pp.99-108
• /
• 2010

웹 어플리케이션의 원활한 유지보수를 위하여 소스 페이지의 가독성 향상은 필수적이다. CSS는 웹 페이지의 구성 요소 중에서 순수한 표현계층이지만 인라인 형태로 삽입되는 경우가 많고, 웹 개발도구에 의해 자동생성되기도 하는데, 이들은 전체 코드의 가독성과 UI 계층의 재사용성이 떨어지게 된다. 기존의 CSS 최적화 연구는 주로 사이즈 압축을 다루고 있어 재사용성이나 가독성에 초점을 맞추고 있지 않다. 본 논문에서는 CSS 가독성 및 재사용성 향상을 위하여 CSS 코드를 구조화하고, 가독성 향상을 위한 기준을 정의하였다. 이들을 기반으로 최종적으로 CSS 코드의 가독성을 높이는 알고리즘을 제안하고, 예제 및 실험을 통하여 본 접근법의 유용성을 보인다.

• ETRI Journal
• /
• 제44권4호
• /
• pp.543-559
• /
• 2022

To determine a suitable waveform for Internet of Things (IoT) transmission over low-Earth orbit (LEO) satellites, this paper reports the results of a performance comparison between chirp spread spectrum (CSS)-based LoRa and direct sequence spread spectrum (DSSS)-based Ingenu. The performance of both waveforms was measured in terms of the packet error rate, throughput, and packet loss rate, considering the Doppler effect caused by the high speed of LEO satellites and the interference among multiple terminals. Simulation results indicate that the DSSS scheme is more suitable than the CSS scheme for high-traffic IoT services because of its robustness against interference among multiple terminals. However, the CSS scheme is more suitable than the DSSS scheme for high-mobility IoT services because of its robustness against the Doppler effect. We discuss various solutions, such as the preprocessing of Doppler effect and avoidance of packet collision, to enhance the performance of the DSSS and CSS schemes. The simulation results of the proposed solution show that the enhanced DSSS scheme can be a proper waveform in IoT transmission over LEO satellites for both the high-traffic and high-mobility services.

• KSTLE International Journal
• /
• 제1권1호
• /
• pp.12-20
• /
• 2000

Nano-wear and friction of carbon overcoated laser-textured and mechanically-textured computer hard disk were characterised after contact start/stop (CSS) wear test. Various analytical and mechanical testing techniques were employed to study the changes in topography, roughness, chemical elements, mechanical properties and friction characteristics of the coating arising from the contact start/stop wear test These techniques include: the atomic force microscopy (AFM), the continuous nano-indentation test, the nano-scratch test, the time-of-flight secondary ion mass spectroscopy (TOF-SIMS) and the auger electron spectroscopy (AES). It was shown that the surface roughness of the laser-textured (LT) bump and mechanically textured (MT) Bone was reduced approximately am and 7nm, respectively, after the CSS wear test. The elastic modulus and hardness values increased after the CSS test, indicating straining hardening of the top coating layer, A critical load was also identified fer adhesion failure between the magnetic layer and the Ni-P layer, The TOF-SIMS analysis also revealed some reduction in the intensity of C and $C_2$$F_59$, confirming the wear of lubricant elements on the coating surface.

• The Korean Journal of Ecology
• /
• 제8권3호
• /
• pp.163-169
• /
• 1985

The composition rates of litters were studied at Camellia japonica forests in Koje-Do and Haenam, and at Quercus acuta, Quercus acutissima, Cryptomeria japonica, and Chamaecyparis abtusa forests in Haenam. Total amounts of nitrogen, phosphorus, potassium, calcium, and sodium in litter samples were measured and the relation between these amounts and decomposition rate was studied. Annual litter production were rarely different at each forest in Haenam. The amount of accumulated organic matter was about 4 times greater at C. japonica forest in Koje-Do than at the C. japonica forest in Haenam. These amounts were 5, 282.1 $\pm$ 1, 026.03g/m2 in Koje-Do and 1, 420.7 $\pm$ 384.77g/$m^2$ in haenam. The decomposition rate were rarely differnet at each forest in Haenam, but the rates showed great difference at C. japonica foreests in Koje-Do and Haenam. The rates were 0.093 and 0.313 at C. japonica forests in Koje-Do and in Haenam respectively. The sodium contents were 0.472% and 0.229% on L layer and on Css layer of C. japonica forest in Koje-Do, while they were 0.034% and 0.043% on L layer, and on Css layer of C. jpaonica forest in Haenam. It is sugested that much difference in the salt contents in the forest floor was present from the results of sodium content measured at each site, and that the decomposition rate was affected by the much concentration of salt in Koje-Do.

• 한국컴퓨터정보학회논문지
• /
• 제11권1호
• /
• pp.55-61
• /
• 2006

멀티미디어 타이틀을 재생하기 위해서는 운영체제에 의존적인 재생기가 필요하다. 재생기의 중복 개발에 따른 데이터 호환성 및 소모적인 리소스 사용 등의 문제점을 야기한다. 이 문제점을 해결하기 위하여 본 논문은 멀티미디어 타이틀 컨텐츠를 인터넷 문서로 제작하고, 인터넷 브라우저를 이용하여 재생할 수 있는 방법을 제안하고자 한다. 이를 위해서 멀티미디어 타이틀에 저작된 내용을 인터넷 페이지로 재생성하고자 한다. 멀티미디어 데이터의 공간동기화를 위해서 CSS Layer를 기반으로 화면 구성을 하고, 졸업앨범에서와 같이 학생의 신상 정보를 이용해서 만들어지는 멀티페이지 화면을 인터넷으로 재구성하기 위해서, 멀티미디어 타이틀의 전용 DB 데이터를 인터넷에서 사용 가능한 XML 데이터로 변환하여 인터넷 문서에 연동하여 서비스 가능하도록 하였다. 인터넷 페이지의 스크립트에 의해서 인적정보를 갖는 XML 데이터와 리소스 정보를 이용하여 멀티미디어 전용 재생기와 같은 효과를 얻을 수 있다. 결과적으로 인터넷이 접근 가능한 어떤 곳이든 전용 재생기 없이 멀티미디어 타이틀을 인터넷 브라우저를 이용하여 재생할수 있다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제4권3호
• /
• pp.258-272
• /
• 2010

The low-rate (LR) UWB is a promising technology for the ubiquitous sensor network (USN) due to its extremely low power consumption and simple transceiver implementation. However the limited communication range is a bottleneck for its widespread use. This paper deals with a new frame structure of class 4 active RFID multi-hop relay system based on ISO/IEC 18000-7 standard integrating with IEEE 802.15.4a LR-UWB PHY layer specification, which sets up a connection to USN. As a result of the vital importance of the coverage and throughput in the application of USN, further we analyze the performance of the proposed system considered both impulse radio UWB (IR-UWB) and chirp spread spectrum (CSS). Our simulation results show that the coverage and throughput are remarkably increased.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.98.2-98.2
• /
• 2012

Thin film solar cells are growing up in the market due to their high efficiency and low cost. Especially CdTe and $CuInGaSe_2$ based solar cells are leading the other cells, but due to the limited percentage of the elements present in our earth's crust like Tellurium, Indium and Gallium, the price of the solar cells will increase rapidly. Copper Zinc Tin Sulfide (CZTS) and Copper Zinc Tin Selenide (CZTSe) semiconductor (having a kesterite crystal structure) are getting attention for its solar cell application as the absorber layer. CZTS and CZTSe have almost the same crystal structure with more environmentally friendly elements. Various authors have reported growth and characterization of CZTSe films and solar cells with efficiencies about 3.2% to 8.9%. In this study, a novel method to prepare CZTSe has been proposed based on selenization of stacked Copper Selenide ($Cu_2Se$), Tin Selenide ($SnSe_2$) and Zinc Selenide (Zinc Selenide) in six possible stacking combinations. Depositions were carried out through RF magnetron sputtering. Selenization of all the samples was performed in Close Space Sublimation (CSS) in vacuum at different temperatures for three minutes. Characterization of each sample has been performed in Field Emission SEM, XRD, Raman spectroscopy, EDS and Auger. In this study, the properties and results of $Cu_2ZnSnSe_4$ thin films grown by selenization will be presented.

• 자원환경지질
• /
• 제29권6호
• /
• pp.739-744
• /
• 1996

Kite는 조사지역을 한번 횡단함으로써 3차원 지하영상을 얻기 위한, 새로이 개발된 단일채널(single-channel) 탄성파 취득시스템이다. Kite시스템은 진행방향에 수직으로 전개되는 하이드로폰(hydrophone)과 하이드로폰의 한쪽 끝에 설치하는 에너지원(source)인 에어건(air-gun)으로 구성된다. 3차원 지하영상은 기존 다중채널 반사자료 처리방법을 사용하며, 공통 소스점 모음(CSS gather)을 딕스식을 이용하여 지하층들의 평균 구간속도를 구하게 된다. 이 구간속도와 정규 고결응력으로 부터 물리상수들을 선택적으로 이용하여 전단계수, 공극율, 횡파속도 등을 구하였다. 본 시스템은 북대서양의 대륙붕에서 실시되었으며 좋은 결과를 얻을 수 있었다.

• 한국도로학회논문집
• /
• 제20권1호
• /
• pp.47-58
• /
• 2018

PURPOSES : The purpose of this study is to evaluate the mechanical properties of a cold-recycling asphalt mixture used as a base layer and to determine the optimum emulsified-asphalt content for ensuring the mixture's performance. METHODS : The physical properties (storage stability, mixability, and workability) of three types of asphalt emulsion (CMS-1h, CSS-1h, and CSS-1hp) were evaluated using the rotational viscosity test. Asphalt emulsion residues, prepared according to the ASTM D 7497-09 standard, were evaluated for their rheological properties, including the $G*/sin{\delta}$and the dynamic shear modulus (${\mid}G*{\mid}$). In addition, the Marshall stability, indirect tensile strength, and tensile-strength ratio (TSR) were evaluated for the cold-recycling asphalt mixtures fabricated according to the type and contents of the emulsified asphalt. RESULTS : The CSS-1hp was found to be superior to the other two types in terms of storage stability, mixability, and workability, and its $G*/sin{\delta}$ value at high temperatures was higher than that of the other two types. From the dynamic shear modulus test, the CSS-1hp was also found to be superior to the other two types, with respect to low-temperature cracking and rutting resistance. The mixture test indicated that the indirect tensile strength and TSR increased with the increasing emulsified-asphalt content. However, the mixtures with one-percent emulsified-asphalt content did not meet the national specification in terms of the aggregate coverage (over 50%) and the indirect tensile strength (more than 0.4 MPa). CONCLUSIONS : The emulsified-asphalt performance varied greatly, depending on the type of base material and modifying additives; therefore, it is considered that this will have a great effect on the performance of the cold-recycling asphalt pavement. As the emulsified-asphalt content increased, the strength change was significant. Therefore, it is desirable to apply the strength properties as a factor for determining the optimum emulsified-asphalt content in the mix design. The 1% emulsified-asphalt content did not satisfy the strength and aggregate coverage criteria suggested by national standards. Therefore, the minimum emulsified-asphalt content should be specified to secure the performance.

• 전자공학회논문지SC
• /
• 제49권4호
• /
• pp.45-54
• /
• 2012

위치기반서비스에서 주요기술로는 GPS가 있지만, 현재 위성 통신을 통해 위치 추정이 불가능한 실내지역의 위치추정기술로는 저 전력 근거리 통신의 연구가 주로 이루어지고 있다. 특히 첩 대역확산방식을 이용한 저 전력 근거리 통신 기술이 신호도달거리의 확장, 잡음에 대한 영향, 저 전력 데이터 통신 등 여러 가지 면에서 기존의 근거리 통신 기술보다 더 나은 특징을 보임에 따라 위치 추정을 위하여 제안된 IEEE802.15.4a의 물리계층에 표준으로 채택되었다. 하지만, 첩 대역확산 방식을 통한 측정된 거리는 기본적으로 오차를 가지는데, 이를 측정된 거리에 따라 가중치 값을 나타내는 비례 계수를 이용하여 영이 아닌 평균값을 가지는 잡음으로 모델링 할 수 있다. 하지만 초기의 빠르고 정확한 위치 추정에는 다소 시간이 걸린다. 따라서 본 논문에서는 이동 노드의 정확한 위치 추정을 위하여 최소자승법과 확장 칼만 필터를 이용하여 보다 빠르고 안정된 위치 추정 시스템을 제안한다. 끝으로 실제 위치 추정 시스템의 구현으로 한 실험 결과를 바탕으로 제안된 알고리즘의 안정된 적응성과 정확성을 평가하여 그 성능을 알아보았다.