• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05b
• /
• pp.150-153
• /
• 2004

CS HSA, 1034A와 TMOS, MTMS 실란 간의 졸겔 반응조건이 코팅도막의 특성에 미치는 영향을 조사하기 위하여 CS 종류, CS 대비 TMOS/MTMS의 함량비, 반응시간 등을 달리하여 졸을 합성하고, 합성된 졸을 slide glass에 코팅한 후 $300^{\circ}C$에서 경화시킨 도막의 특성들을 조사하였다. CS 대비 MTMS의 함량 증가와 더불어 접촉각이 증가할 것으로 예상되지만 CS의 종류, 실란함량, 반응시간 등에 따라 증가하는 모양은 상당히 차이가 있었고 HSA CS계 보다는 1034A CS계로 제작된 도막에서 MTMS 함량과 접촉각과의 상관성이 다소 우수하였다. 표면거칠기는 HSA CS계인 경우에 반응시간과 MTMS 함량에 따라 민감하게 변했지만 1034A CS계에서는 HSA계의 졸에 비해 표면 거칠기가 향상되어 반응시간과 MTMS 함량의 조건에 영향을 받지 않고 표면조도와 균질성이 우수하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05b
• /
• pp.154-157
• /
• 2004

산성 colloidal silica(CS) 1034A, HSA와 TMOS, MTMS 실란 간의 졸겔반응조건이 코팅도막의 특성에 미치는 영향을 조사하기 위하여 1034A CS계에 대해서는 1단계로 실란들을 첨가하고 동일한 MTMS에 대해 CS/TMOS의 함량비, 반응시간을 달리하여 졸을 합성하였다. HSA계에 대해서는 2단계로 분리하여 TMOS, MTMS 실란을 첨가하는데 실란 첨가순서와 실란 함량비, 반응시간을 달리하여 졸을 합성하였다. 합성된 졸은 slide glass에 함침 코팅한 후 $300^{\circ}C$에서 경화시킨 도막의 특성들을 조사하였다. 1034A CS계는 CS/TMOS의 비가 70/30일 때 50/50인 경우보다 반응시간에 따라서 표면조도가 우수하여 접촉각에 영향을 덜 주므로 효과적인 균일 반응상으로 진행되었다. HSA CS계는 1단계로 MTMS를 먼저 첨가하고 MTMS/TMOS 비를 25/75로 첨가하면 반응시간에 따라서 표면조도 거칠기에 크게 영향 받지 않고 접촉각을 안정화시킬 수 있다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.82-85
• /
• 2004

Colloidal Silica(CS) HSA/2327과 methyltrimethoxysilane(MTMS), 1034A와 tetramethoxysilane(TMOS)/MTMS 간의 졸겔 반응조건이 코팅도막의 특성에 미치는 영향을 조사하기 위하여 CS종류, CS 대비 TMOS/MTMS의 함량비, 반응시간 등을 달리하여 졸을 합성하고, 합성된 졸을 slide glass에 코팅한 후 $300^{\circ}C$에서 경화시킨 도막의 특성들을 조사하였다. HSA/2327/MTMS에 의한 졸로부터 제조된 코팅도막은 졸 반응시간 의존성이 거의 없으며 반응초기부터 접촉각이 상당히 안정되어 있고 특히 낮은 MTMS 함량을 가진 졸들이 더욱 안정된 표면물성을 보였다. 1034A/TMOS/MTMS에 의해서 제조된 코팅도막은 적절한 소수성의 형성과 표면조도의 향상과 더불어 안정된 접촉각 양상을 나타내었다. 표면거칠기는 HSA/2327 혼합 CS계에 의해서는 반응시간이 길고 MTMS 함량이 높아질 때 비교적 표면조도가 나빠지는데 반응시간과 더불어 약간씩 증가하는 경향을 보였다. 1034A CS계에서는 반응시간과 MTMS 함량의 조건에 영향을 받지 않고 표면조도와 균질성이 우수하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.231-234
• /
• 2003

CS와 실란의 반응시 생성된 실란올들이 동종간의 반응에 비하여 실리카 표면과의 반응이 진행되는 효과에 따라서, 그리고 실란들의 종류에 따라 경화밀도와 재료특성이 상당히 달라지게 된다. 본 논문에서는 CS/MTMS 졸반응에서 CS의 종류, CS/MTMS의 함량비, 졸의 반응시간 등을 인자로 하여 졸들을 합성하고 겔화된 도막의 물성들을 조사하였다. 그 결과 MTMS의 함량과 비례하여 친수성은 증가하고 표면조도는 나아지는 것을 알 수 있었고 반응시간에 비례하여 친수성은 감소하고 표면조도는 안 좋아지는 것을 알 수 있었다. 그리고 내열성은 MTMS의 함량이 적을수록 좋은 결과를 나타내었다.

• Journal of Adhesion and Interface
• /
• v.8 no.2
• /
• pp.1-8
• /
• 2007

The hard coatings on the polycarbonate plate were performed with the object of substitution the glass in the car to the polycarbonate plate. In this research, (3-glycidoxypropyl)trimethoxysilane (GPTMS), colloidal silica (CS), and (3-aminopropyl)triethoxysilane (APS) were used to prepare the coatings by sol-gel process. The optimum conditions and formulation to get the excellent physical properties of the coating were determined. GPTMS and CS were hydrolyzed in ethanol, and then APS was added in this solution. Using these solution the hard coating were applied to the polycarbonate plate. The smooth coating which got the 2 H class in pencil hardness was formed. And this coating showed excellent abrasion resistant and adhesion property.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.232-233
• /
• 2006

In recent years the interest in organic/inorganic hybrid materials has increased at a fast rate. Nano organic-inorganic hybrid composites have shown advantages for preparing hard coating layers. Especially, nano hybrid composite has low environmental pollution. It has high transparency, hardness, toughness, thermal dissociation temperature, hydrophobicity by using nano sized inorganic material. There are many ways in which these materials may be synthesized, a typical one being the use of silica and silanes using the sol-gel process. The structure of sol-gel silica evolves as a result of these successive hydrolysis and condensation reactions and the subsequent drying and curing. The sol-gel reactions are catalyzed by acids and produce silica sol solutions. The silica sol grows until they reach a size where a gel transition occurs and a solid-like gel is formed. Colloidal silica(CS)/silane sol solutions were synthesized in variation with parameters such as different acidity and reaction time. In order to understand their physical and chemical properties, sol-gel coating films were fabricated on glass. From all sol-gel solutions, seasoning effect of sol-gel coating layer on glass was observed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.551-552
• /
• 2007

Coating films were prepared from silane-terminated Colloidal silaca(CS) and UV-curable acrylate resin. The silane-terminated CSs were synthesized from CS and methyltrimethoxysilane(MTMS) and then treated with 3-methacryloxypropyltrimethoxysilane(MAPTMS)/3-glycidoxypropyltrimethoxysilane( GPTMS)/vinyltrimethoxysilane(VTMS) by sol-gel process, respectively. The silane-terminated CS and acrylate resin were hybridized using UV-curing system. Thin films of hybrid material were prepared using spin coater on the glass. Their hardness, contact angle and transmittance improved with the addition of silane-terminated CS.

• Applied Chemistry for Engineering
• /
• v.22 no.6
• /
• pp.691-696
• /
• 2011

Organic-inorganic hybrid coating solutions were prepared by using a sol-gel method for transparent film. In this study, colloidal silica (CS) and alkoxy silane such as vinyltrimethoxysilane (VTMS), and [3-(methacryloyloxy)]propyltri methoxy silane (MAPTMS) were used in various conditions such as types of organic silane, weight ratios of CS to silane and reaction times. Coating solutions which were bar coated on the PET (polyethyleneterephthalate) film and cured were investigated on the chemical and physical properties. The pencil hardness and adhesion of coating films were increased with increasing the organic silane content in the coating solution compared to that of PMMA (polymethamethylcrylate) coating solution.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.12
• /
• pp.1345-1349
• /
• 2001

New quadruply-bridged calix[6]arenes (I-V) have been studied as cesium selective ionophores in poly(vinyl chloride) (PVC) membrane electrodes. PVC membranes were prepared with dioctyl sebacate (DOS) or 2-nitrophenyl octyl ether (o-NPOE) as the sol vent mediator and potassium tetrakis(p-chlorophenyl)borate as the lipophilic salt additive. These ionophores produced electrodes with near-Nernstian slope. The selectivity coefficients for cesium ion with respect to alkali, alkaline earth and ammonium ions have been determined. The lowest detection limit (logaCs+ = -6.3) and the higher selectivity coefficient (logkpotCs+,Rb+ = -2.1 by SSM, -2.3 by FIM for calix[6]arene I) for Cs+ have been obtained for membranes containing quadruply-bridged calix[6]arenes (I, Ⅱ, Ⅲ), which have no para t-butyl substituents on the bridging benzene ring.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.32 no.4
• /
• pp.255-260
• /
• 2018

Chung-Sang (CS) is an experimental herbal remedy that is formulated to treat respiratory diseases implicated by inflammation. The herbs comprised of CS are frequently prescribed for treating various inflammatory symptoms: Menthae haplocalycis Herba, Magnoliae Flosis, Xanthii Fructus, Herba Asari, and Caryphylli Flos. Here, we prepared the extract of CS with boiling water (wCS) or with 50 % ethanol (eCS) and examined whether the two different extracts of CS exhibit a toxicity to cultured cells and mice. RAW 264.7 cells were treated with wCS or eCS, and the cytotoxicity of these extracts to RAW 264.7 cells was determined by an MTT assay. Although the production of intracellular reactive oxygen species that are detrimental to the cells was not increased by the extracts, the cytotoxicity to the cells was evident from 10 mg/ml of wCS and 100 mg/ml of eCS, suggesting that eCS is less cytotoxic. When mice (n = 10/group) received a single intratracheal wCS or eCS daily for 14 days, wCS yielded 40 % mortality, whereas eCS showed none. Both wCS and eCS did not significantly affect the weight of the body and of vital organs, except the lung. Biochemical analyses of mice blood indicated no damage to liver or kidney. However, unlike eCS, wCS significantly increased the level of IgE in serum. Collectively, our results show that eCS was less toxic than wCS, suggesting that CS prepared with 50 % ethanol is preferential over the conventional way of preparing CS.