• Korean Journal of Materials Research
• /
• v.9 no.4
• /
• pp.341-344
• /
• 1999

We reported compositional separation(CS) into Co-enriched and Cri-enriched components inside the grains of Co-Cr based thin films prepared by rf sputtering. CS strongly depends on the sputtering conditions of substrate temperature and target composition. Tuning the microstructure of the Co-Cr films is important in order to employ the CS for high-density magnetic recording. We investigated the origin of CS from thermodynamic viewpoint. We employ a spinodal decomposition-like model to describe the origin of the CS in Co-Cr films. We consider the total free energy of the Co-Cr films as the sum of several free energies of; 1) thermodynamic mixing entropy of a binary solid solution, 2) magnetic ordering interaction(MOI) energy below the Curie temperature, and 3) excess interaction energy(XS) caused by the sputtering process as a function of temperature and composition. Those energies distorted the total free energy like the spinodal decomposition and caused the compositionally separated fine microstructure inside the grains. If the second derivative of the total free energy with respect to Cr composition becomes negative at a given substrate temperature, we may observe a metastable compositional separation inside the Co-Cr alloy films. We expect to exploit the microstructure of CS for ultra-high density magnetic recording.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.696-700
• /
• 2003

$H_2SO_4$ and citric acid had higher extraction efficiency of $^{137}Cs$ from soil than the other chemicals. Thus, $H_2SO_4$and citric acid were used as additives on remediation experiment by electrokinetic method to increase removal efficiency of $^{137}Cs$ from the radioactive soil being stored during a long time. An average velocity of effluent discharged from experimental column $2.0{\times}10^{-2}$/cm/min and a volume of the discharged soil wastewater for 10 days is 3.6 Pore Volume. The 54% of a total of $^{137}Cs$ in the column was decontaminated for 10 days. Furthermore, the predicted values of residual concentration by the developed model were quite similar to those obtained from experiments.

• Research in Mathematical Education
• /
• v.24 no.3
• /
• pp.137-173
• /
• 2021

Research and national standards, such as the Next Generation Science Standards (NGSS) in the United States, promote the development and implementation of K-12 interdisciplinary curricula integrating the disciplines of science, technology, engineering, mathematics, and computer science (STEM+CS). However, little research has explored how teachers provide epistemic support in interdisciplinary contexts or the factors that inform teachers' epistemic support in STEM+CS activities. The goal of this paper is to articulate how interdisciplinary instruction complicates epistemic knowledge and resources needed for teachers' instructional decision-making. Toward these ends, this paper builds upon existing models of teachers' instructional decision-making in individual STEM+CS disciplines to highlight specific challenges and opportunities of interdisciplinary approaches on classroom epistemic supports. First, we offer considerations as to how teachers can provide epistemic support for students to engage in disciplinary practices across mathematics, science, engineering, and computer science. We then support these considerations using examples from our studies in elementary classrooms using integrated STEM+CS curriculum materials. We focus on an elementary school context, as elementary teachers necessarily integrate disciplines as part of their teaching practice when enacting NGSS-aligned curricula. Further, we argue that as STEM+CS interdisciplinary curricula in the form of NGSS-aligned, project-based units become more prevalent in elementary settings, careful attention and support needs to be given to help teachers not only engage their students in disciplinary practices across STEM+CS disciplines, but also to understand why and how these disciplinary practices should be used. Implications include recommendations for the design of professional learning experiences and curriculum materials.

• Nuclear Engineering and Technology
• /
• v.54 no.8
• /
• pp.3017-3026
• /
• 2022

The ¹³¹Cs radioisotope with a short half-life time and high average radiation energy can treat the cancer effectively in prostate brachytherapy. The typical ¹³¹Cs production processes have a separation step of the cesium from ¹³¹Ba to obtain a high specific radioactivity. Herein, we suggested a novel ¹³¹Cs separation method based on the Ba²⁺ adsorption of alginate beads. It is necessary to reduce the affinity of alginate beads to cesium ions for a high production yield. The carboxyl group of the alginate beads was replaced by a sulfonate group to reduce the cesium affinity while reinforcing their affinity to barium ions. The modified beads exhibited superior Ba²⁺ adsorption performances to native beads. In the fixed-bed column tests, the saturation time and adsorption capacity could be estimated with the Yoon-Nelson model in various injection flow rates and initial concentrations. In terms of the Cs elution, the modified alginate showed better performance (i.e., an elution over 88%) than the native alginate (i.e., an elution below 10%), indicating that the functional group modification was effective in reducing the affinity to cesium ions. Therefore, the separation of cesium from the barium using the modified alginate is expected to be an additional option to produce ¹³¹Cs.

• Smart Structures and Systems
• /
• v.29 no.3
• /
• pp.433-444
• /
• 2022

Concrete is a most utilized material in the construction industry that have main components. The strength of concrete can be improved by adding some admixtures. Evaluating the impact of fly ash (FA) and silica fume (SF) on the long-term compressive strength (CS) of concrete provokes to find the significant parameters in predicting the CS, which could be useful in the practical works and would be extensible in the future analysis. In this study, to evaluate the effective parameters in predicting the CS of concrete containing admixtures in the long-term and present a fitted equation, the multivariate adaptive regression splines (MARS) method has been used, which could find a relationship between independent and dependent variables. Next, for optimizing the output equation, biogeography-based optimization (BBO), particle swarm optimization (PSO), and hybrid PSOBBO methods have been utilized to find the most optimal conclusions. It could be concluded that for CS predictions in the long-term, all proposed models have the coefficient of determination (R²) larger than 0.9243. Furthermore, MARS-PSOBBO could be offered as the best model to predict CS between three hybrid algorithms accurately.

• Archives of Pharmacal Research
• /
• v.27 no.6
• /
• pp.662-669
• /
• 2004

The highly water-soluble monomethoxypoly(ethyleneglycol) (mPEG) prod rugs of cyciosporin A(CsA) were synthesized. These prod rugs were prepared by initially preparing intermediate in the form of carbonate at the 3'-positions of CsA with chloromethyl chloroformate, in the pres-ence of a base to provide a 3'-carbonated CsA intermediate. Reaction of the CsA intermediate with mPEG derivative in the presence of a base provides the desired water-soluble prod rugs. As a model, we chose molecular weight 5 kDa mPEG in the reaction with CsA to give water soluble prodrugs. To prove that the prod rug is decomposed in the body to produce CsA, the enzymatic hydrolysis test was conducted using human liver homogenate at $37^{\circ}C$. The prodrug was decomposed in human liver homogenate to produce the active material, CsA, and the hydrolysis half-life ($t_{1/2}$) of the prodrug, KI-306 was 2.2 minutes at $37^{\circ}C$. However, a demon-stration of non-enzymatic conversion in pH 7.4 phosphate buffer was provided by the fact that the half-life ($t_{1/2}$) is 21 hours at 37$^{\circ}C$. The hydrolysis test in rat whole blood was also conducted. The hydrolysis was seen with half-life ($t_{1/2}$) of about 9.9, 65.0, 14.2, 3.4, 2.1 9.5, and 1.6 minutes for KI-306, 309, 312, 313, 315, 316, and 317, respectively. This is the ideal for CsA prodrug. The pharmacokinetic study of the prodrug, KI-306, in comparison to the commer-cial product (Sandimmune Neoral Solution) was also carried out after single oral dose. Each rat received 7 mg／kg of CsA equivalent dose. Especially, the prodrug KI-306 exhibits higher AUC and $C_{max}$ than the conventional Neoral. The AUC and $C_{max}$ were increased nearly 1.5 fold. The kinetic value was also seen with $T_{max}$ of about 1.43 and 2.44 hours for KI-306 and Neoral, respectively.

• Journal of Korea Port Economic Association
• /
• v.29 no.1
• /
• pp.1-22
• /
• 2013

Logistics service is one of the most frequently addressed competitive edges exercised by container terminals that face fierce competition. Many of researches have tried to assess the logistics service quality and attempted to propose the strategic ways to manage it. However, it has been known that quality is a multi-dimensional construct and not all quality attributes are viewed as equally important to customers. Each quality attribute has different implications for customer satisfaction. Timko (1993) has developed customer satisfaction (CS) coefficient based on Kano model. The CS coefficient is indicative of how strongly a service quality may influence customer satisfaction. This study attempted to identify the satisfying/dissatisfying quality factors using Kano model and CS coefficient. In so doing, several satisfying and dissatisfying quality attributes in logistics service quality were identified.

• The Journal of Advanced Prosthodontics
• /
• v.15 no.4
• /
• pp.179-188
• /
• 2023

PURPOSE. This in vitro study aimed to evaluate the performance of digital intraoral scanners in a completely edentulous patient with angled and parallel implants. MATERIALS AND METHODS. A total of 6 implants were placed at angulations of 0°, 5°, 0°, 0°, 15°, and 0° in regions #36, #34, #32, #42, #44, and #46, respectively, in a completely edentulous mandibular polyurethane model. Then, the study model created by connecting a scan body on the implants was scanned using a model scanner, and a 3D reference model was obtained. Three different intraoral scanners were used for digital impressions (PS group, TR group, and CS group, n = 10 in each group). The distances and angles between the scan bodies in these measurement groups were measured. RESULTS. While the Primescan (PS) impression group had the highest accuracy with 38 ㎛, the values of 104 ㎛ and 171 ㎛ were obtained with Trios 4 IOSs (TR) and Carestream 3600 (CS), respectively (P = .001). The CS scanner constituted the impression group with the highest deviation in terms of accuracy. In terms of dimensional differences in the angle parameter, a statistically significant difference was revealed among the mean deviation angle values according to the scanners (P < .001). While the lowest angular deviation was obtained with the PS impression group with 0.185°, the values of 0.499° and 1.250° were obtained with TR and CS, respectively. No statistically significant difference was detected among the impression groups in terms of precision values (P > .05). CONCLUSION. A statistically significant difference was found among the three digital impression groups upon comparing the impression accuracy. Implant angulation affected the impression accuracy of the digital impression groups. The most accurate impressions in terms of both distance and angle deviation were obtained with the PS impression group.

• Journal of Radiation Protection and Research
• /
• v.28 no.4
• /
• pp.349-351
• /
• 2003

To ensure the safety of the currently operating nuclear power plant, the Periodic Safety Review program has been conducted. In PSR program, the cumulative behavior of the radionuclide that might be released from the power plant is addressed. The Cs-137 in soil around Kori nuclear power plant was investigated. The soil sample was analyzed and compared with the reference area. The model calculation explained the depth profile of Cs-137.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.14
• /
• pp.237-256
• /
• 2000

Electronic commerce has been threatening to address the transaction inefficiencies in international trade that is conducted through letters of credit(L/Cs) and other forms of traditional paper-based financial instruments. The replacement of traditional paper documets with electronic alternatives is becoming more of a relity within a number of business sectors. The conceptual model of electronic L/Cs presented in this paper is intended to provide a framework for discussing the development of a paperless credit. The TradeCard network provides a business-to-business e-commerce infrastructure that enables buyers and sellers to conduct and settle international trade transactions securely over the Internet. Sellers and Buyers should select the best payment methods of traditional L/Cs, electronic L/Cs, TradeCard, Bank Credit Card etc. in consideration of their business circumstances.