• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.239-246
• /
• 2008

In this study, the influence of reaction temperatures, mixing time and flexible modifier for crumb rubber modified asphalt(CRMA) as processing conditions were investigated. The temperature susceptibility and adhesion properties of neat and modified asphalts at low temperature measured using the penetration and tensile adhesion test. It was found that processing temperatures and flexible modifier were important factors for tensile adhesion strength and toughness energy at low temperature. The CRMA in the higher processing temperature and flexible modifier exhibited improved tensile adhesion properties which indicated the flexible structure of neat and modified asphalt binder. In general, the improvements of the physical properties in the CRMAs were due to the improvements of miscibility between CR and asphalt binder. It was found that the adhesion properties of the flexible agent modified CRMA were higher than CRMA were related to the flexible agent tend to penetrate into CR particles and asphalt binder.

• International Journal of Highway Engineering
• /
• v.11 no.3
• /
• pp.33-40
• /
• 2009

The use of the crumb rubber as an asphalt binder modifier may contribute to road maintenance and repair. The adhesion properties of the crumb rubber modified asphalt (CRMA) sealant have attracted interest due to brittle and adhesion failure of asphalt binders at low temperatures. In this study, the influence of a flexibilizer as a modifier for CRMA at low temperatures was investigated. Their properties were measured using the penetration, the softening point, the tensile and tensile adhesion tests at low temperature. The tensile adhesion strength and the strain of CRMAs were increased with increasing ductile deformation of the CR and the asphalt binder in the flexiblizer modified CRMAs. It was found that the flexibilizer concentration was an important factor for tensile and adhesion properties of CRMAs at low temperatures.

• International Journal of Highway Engineering
• /
• v.18 no.6
• /
• pp.41-50
• /
• 2016

OBJECTIVES : In this study, microstructural components of crumb rubber modified asphalt (CRMA) binder were investigated using environmental scanning electron microscope (ESEM). To clearly understand the elemental composition of the CRMA binder, energy dispersive X-ray spectroscopy (EDX) was employed on the ESEM samples. METHODS : CRMA binders were produced using open blade mixers at $177^{\circ}C$ for 30 min. The binders were artificially aged through a series of accelerated aging processes. Sample preparation was done by making a mold shape on the glass slide. Thereafter, the morphology of the CRMA binder was observed using the ESEM coupled with the EDX. RESULTS : The images captured from the ESEM indicate that the unaged CRMA binder appears to have a single-phase continuous nonuniform structure after the addition of crumb rubber particles, whereas the artificially aged CRMA binder was observed to have two different phases. ESEM coupled with EDX shows detailed internal structure of the modified binders compared to other technologies (i.e., optical microscopy, atomic force microscopy, and conventional scanning electron microscope). CONCLUSIONS : The captured images resemble the internal structures such as the viscous properties of the unaged CRMA binder and the interaction between the rubber particles and the base binder at aged condition. ESEM is a powerful instrument and with the introduction of EDX, it provided more details of the network microstructure of the asphalt binder. ESEM coupled with EDX is recommended for use in future investigation of microstructure of asphalt binders.

• Mycobiology
• /
• v.33 no.1
• /
• pp.7-11
• /
• 2005

Twenty-two isolates of Sclerotium rolfsii causing spotted leaf rot from Varanasi, India were grown on 6% Cyperus rotundus rhizome meal agar (CRMA) medium for the induction of athelial stage (Athelia rolfsii). Only one isolate obtained from Sphaeranthus indicus formed basidial stage on CRMA medium while the other 21 isolates did not. Basidial stage was also produced in S. indicus isolate at different concentrations (5.5, 6.0 and 6.5% w/v) of CRMA medium. Size of basidia, sterigmata and basidiospores of this isolate was measured. Basidia clavate, hyaline and measured $10{\sim}12{\times}4{\sim}5\;{\mu}m$ in size, basidiospores hyaline, unicellular, subglobose to ellipsoid produced on sterigmata and measured $3{\sim}5{\times}2{\sim}4\;{\mu}m$ in size, sterigmata hyaline and measured $4{\sim}5{\times}1.5{\sim}2\;{\mu}m$ in size. The results of the present study revealed wide variation in spotted leaf rot isolates of S. rolfsii. A reddish zone around the colony of S. rolfsii isolate from Vernonia sp. was observed on CRMA medium. HPLC analysis of the zone revealed the presence of gallic and ferulic acid which were also thought to be responsible for reduced mycelial growth of the isolate on CRMA medium.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10c
• /
• pp.160-162
• /
• 2001

Cyclic-Reservation Multiple-Access(CRMA) is an access scheme for high-speed local and metropolitan area networks based on folded-bus or dual-bus configurations. CRMA provides high throughput and fairness independent of the network speed or distance. This paper describes a simulation-based quantitative analysis of the performance gains obtained by introducing slot reuse in CRMA. Generally, a longer cycle length means a longer access delay and a lower throughput. There-fore, it is desirable to develop a scheme such that the cycle length is the shortest. In this paper, we will study the problem of reducing the total number of empty slots generated within every cycle. However, it has been shown that the problem is NP-complete under the constraint that all empty slots used by a station in a cycle are required to be consecutive. We present the algorithm that improves previous novel approach by using previous node information. We compare our slots reuse scheme with several slot reuse algorithms such as region scheme (FMR), address schemes, novel approach in terms of the following two important performance criteria: average cycle length and average slot utilization ratio. As compared with the one proposed in novel algorithm, the new scheme makes the cycle length much shorter. Besides, the resulting slot utilization and the access delay are better than those of the other two schemes.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1999.04a
• /
• pp.530-530
• /
• 1999

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6A
• /
• pp.803-819
• /
• 1999

We introduces a wireless multimedia CDMA system configuring multiple transmission links between a user and radio ports. We propose a centralized reservation access control scheme with transmission scheduling and dynamic allocation (CRMA/TSDA) to support the diverse multimedia traffic in the introduced CDMA system. We propose two types of transmission allocation algorithms: slot and link allocation algorithms with local information and global information. The transmission allocation algorithm proposed in this paper allocates a set of ports configuring multiple radio links and transmission slot/power to each of scheduled transmission requests. We perform simulations for the proposed system and algorithms. Through the simulation, we show that the performance of the algorithm with local information stands comparison with that of the quasi-optimum algorithm with global information. Also, the two algorithms in the system has shown to have better performance than the conventional CDMA system with a distributed random transmission method.

• Journal of Information Processing Systems
• /
• v.15 no.5
• /
• pp.1055-1067
• /
• 2019

In view of the deficiencies of existing weighted similarity indexes, a hierarchical clustering method initialize-expand-merge (IEM) is proposed based on the similarity of common neighbors for community discovery in weighted networks. Firstly, the similarity of the node pair is defined based on the attributes of their common neighbors. Secondly, the most closely related nodes are fast clustered according to their similarity to form initial communities and expand the communities. Finally, communities are merged through maximizing the modularity so as to optimize division results. Experiments are carried out on many weighted networks, which have verified the effectiveness of the proposed algorithm. And results show that IEM is superior to weighted common neighbor (CN), weighted Adamic-Adar (AA) and weighted resources allocation (RA) when using the weighted modularity as evaluation index. Moreover, the proposed algorithm can achieve more reasonable community division for weighted networks compared with cluster-recluster-merge-algorithm (CRMA) algorithm.