• 한국환경과학회지
• /
• 제24권9호
• /
• pp.1131-1138
• /
• 2015

Radon exhalation rates have been determined for samples of concrete, gypsum board, marble, and tile among building materials that are used in domestic construction environment. Radon emanation was measured using the closed chamber method based on CR-39 nuclear track detectors. The radon concentrations in apartments of 100 households in Seoul, Busan and Gyeonggi Provinces were measured to verify the prediction model of indoor radon concentration. The results obtained by the four samples showed the largest radon exhalation rate of $0.34314Bq/m^2{\cdot}h$ for sample concrete. The radon concentration contribution to indoor radon in the house due to exhalation from the concrete was $31.006{\pm}7.529Bq/m^3$. The difference between the prediction concentration and actual measured concentration was believed to be due to the uncertainty resulting from the model implementation.

• Journal of the korean society of oceanography
• /
• 제35권2호
• /
• pp.89-97
• /
• 2000

The pyritization of heavy metals in Lake Shihwa sediments was investigated to determine sedimentary Pyrite-heavy metal associations influenced by various metal fractions, organic carbon, and total reduced sulfur. Parameters indicating the degree of heavy metal pyritization (DTMP) and degree of pyritization (DOP) were used to study the incorporation of heavy metals into the pyrite phase. The DOP levels ranged from 3.28-39.45%, showing wide differences among sampling stations. The levels were greater near the water gate and the center of the lake than near the industrial complex. The spatial pattern of the DOP levels was similar to the S/C ratio and also to the salinity. Based on the measured relationships between DOP and DTMP, heavy metals can be divided into three groups. In the first group was As, which showed a high affinity for pyrite. In the second group were Ni, Co and Cu, which showed a gradual increase in DTMP with increasing DOP. In the final group were Pb, Zn, Mn and Cr, which all showed a low DTMP with constant values with respect to DOP.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권4호
• /
• pp.32-39
• /
• 2013

This research focused on the effects of heavy metals on the biomonitoring activity of genetically engineered bioluminescent bacteria, Pseudomonas putida mt-2 KG1206. KG1206 was exposed to single or binary mixtures of different heavy metals as well as soils contaminated with heavy metals. In case of single exposure with different inducer pollutant, the toxicity order was as followings : As(III) > Cd, As(V) >> Cu, Cr(VI). The toxic effects of the binary mixtures was compared to the expected effect based on a simple theory of probabilities. The interactive effects were mostly additive, while in few cases antgonistic and synergistic mode of action was observed for some concentration combinations. No considerable correlation was found between the total metal contents in soils and the bioluminescence activity of each sample. However, statistically significant differences (p = 0.0102) were observed between two groups, classified based on arsenite contamination. These results demonstrate the usage of recombinant bioluminescent microorganism in biomonitoring and the complex interactive effects of metals.

• 펄프종이기술
• /
• 제39권5호
• /
• pp.45-51
• /
• 2007

This study was carried out to investigate various heavy metal contents in packaging papers by pre-treatments for ICP-ES (Inductively Coupled Plasma Emission Spectrometry) analysis. Pre-treatment methods of heavy metals in this study include extraction, migration and decomposition methods (dry ashing, $HNO_3-HClO_4-HF,\;HNO_3,\;and\;H_2SO_4-HNO_3$). Test results were compared with conventional extraction (water) and migration (3% acetic acid) methods. The five representative heavy metals (Cd, As, Pb, Cr and Hg) were analyzed. For Cd, Hg, and As, the results were below detection limit of the instrumental technique. It was considered that the migration test was a better method compared to extraction test, but all the decomposition methods showed much higher detection values than the extraction or migration test. In case of recycled corrugated containers, 3% acetic acid solution extracted about 25% of chromium and 30% of lead compared to the content by decomposition methods. Among all decomposition methods, the nitric acid - perchloric acid - hydrofluoric acid treatment brought a slightly higher detection value than others, but there was no significant difference among them except sulfuric acid - nitric acid method.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.467-471
• /
• 2001

DC accelerated aging characteristics of $Pr_{6}O_{11}$-based ZnO varistors, which are composed of $ZnO+Pr_{6}O_{11}+CoO+Cr_{2}O_{3}+Dy_{2}O_{3}$ ceramics were investigated with CoO content in the range of 0.5 - 5.0 mol%. The varistors doped with 1.0 mol% revealing maximum value(66.61) in the nonlinear exponent exhibited excellent stability, in which the variation rates of the varistor voltage, the nonlinear exponent and leakage current are -1.93%, -10.48%, and +288.79%, respectively, under DC accelerated aging stress, such as $(0.85V_{lmA}/115^{\circ}C/24h)+(0.90V_{lmA}120^{\circ}C/24h)+(0.95V_{lmA}/125^{\circ}C/24h)+(0.95V_{lmA}/150^{\circ}C/24h)$. Next the varistors doped with 2.0 mol% exhibiting the nonlinear exponent of 47.39 showed high stability.

• Design & Manufacturing
• /
• 제2권3호
• /
• pp.32-39
• /
• 2008

after using dom die, this sheet pressed from a variation condition of size, of die holder power,of rpm speed, accordingly the kind of material, the conditionof deformation movement between both sheets is analyzed, is investigated in the Press machine. even if the change quantity which formed raises a blank holder pressure, the change quantity which is special is not visible from the segment where there is not a bead, the segment where there is a bead to the other side does change quantity schedule to initially and the features of press holding power which the change quantity diminishes is showed consequently from pressurization change quantity it is visible but until a rupture territory from the rpm, it goes but the features where the change quantity does not change a lot is observationd, from the CR2-sheet the quality comes out though well but a possibility of getting a result under same conditions of AL-sheet does not become the formation which stands is. It is like that though press-die which uses the drawing-sheet it exchanges the sheets, when AL-sheet with doing, the conclusion for maintain which have a formation sincerity healthy characteristic is same with afterwords.

• Nuclear Engineering and Technology
• /
• 제37권3호
• /
• pp.279-286
• /
• 2005

A prototype of a relativistic proton generation system, based on laser-induced plasma interaction, has been designed and fabricated. The system is composed of three major parts: a fs TW laser; a target chamber, including targets and controls; and a diagnostic system for charged particles and lasers. An Offner-type pulse stretcher for chirped pulse amplification (CPA) and eight pass pre-amplifier are installed. The main amplifier will be integrated with a new pumping laser. The design values of the laser at the first stage are 1 TW in power and 50 fs in pulse duration. We expect to generate protons with their maximum energy of approximately 3 MeV and the flux of at least $10^6$ per pulse using a 10 $\mu$m Al target. A prototype target chamber with eight 8-inch flanges, including target mounts, has been designed and fabricated. For laser diagnostics, an adaptive optics based on the Shack-Hartmann type, beam monitoring, and alignment system are all under development. For a charged particle, CR-39 detectors, a Thomson parabola spectrometer, and Si charged-particle detectors will be used for the density profile and energy spectrum. In this paper, we present the preliminary design for laser-induced proton generation. We also present plans for future work, as well as theoretical simulations.

• ETRI Journal
• /
• 제39권5호
• /
• pp.672-682
• /
• 2017

Video compression exploits statistical, spatial, and temporal redundancy, as well as transform and quantization. In particular, the transform in a frequency domain plays a major role in energy compaction of spatial domain data into frequency domain data. The high efficient video coding standard uses the type-II discrete cosine transform (DCT-II) and type-VII discrete sine transform (DST-VII) to improve the coding efficiency of residual data. However, the DST-VII is applied only to the Intra $4{\times}4$ residual block because it yields relatively small gains in the larger block than in the $4{\times}4$ block. In this study, after rearranging the data of the residual block, we apply the DST-VII to the inter-residual block to achieve coding gain. The rearrangement of the residual block data is similar to the arrangement of the basis vector with a the lowest frequency component of the DST-VII. Experimental results show that the proposed method reduces the luma-chroma (Cb+Cr) BD rates by approximately 0.23% to 0.22%, 0.44% to 0.58%, and 0.46% to 0.65% for the random access, low delay B, and low delay P configurations, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.467-471
• /
• 2001

DC accelerated aging characteristics of Pr$_{6}$O$_{11}$-based ZnO varistors, which are composed of ZnO+Pr$_{6}$O$_{11}$+CoO+Cr$_2$O$_3$+Dy$_2$O$_3$ ceramics were investigated with CoO content in the range of 0.5~5.0 mol%. The varistors doped with 1.0 mol% revealing maximum value(66.61) in the nonlinear exponent exhibited excellent stability, in which the variation rates of the varistor voltage, the nonlinear exponent and leakage current are -1.93%, -10.48%, and 288.79%, respectively, under DC accelerated aging stress, such as (0.85 V$_{1mA}$/115$^{\circ}C$/24h)+(0.90 V$_{1mA}$/12$0^{\circ}C$/24h)+(0.95 V$_{1mA}$/1$25^{\circ}C$/24h)+(0.95 V$_{1mA}$/15$0^{\circ}C$/24h). Next the varistors doped with 2.0 mol% exhibiting the nonlinear exponent of 47.39 showed high stability,ity,ability,ity,

• 연구논문집
• /
• 통권22호
• /
• pp.115-125
• /
• 1992

Mechanical properties and microstructure were investigated on vacuum induction melted $Fe_3A1$base alloys of $DO_3$ structure. Specal emphasis were put on the effect of alloy chemistry, grain size and process(rolling, directional solidification) on mechanical properties of Fe-22.5-39at.%Al at elevated temperature between room temperature and $800^{\circ}C$. grain size of as-cast alloys is refined by rolling from 1mm to $80\mum$. Tensile strength of Fe-24.lat.%AI was about 404MPa at the critical ordering temperature, and the fracture strain of the alloy was 1-2% at room temperature. An inverse temperature dependence of the strength is noticed as-cast $Fe_3A1$. The presence of Cr and Zr do not affect the room temperature ductility and high temperature strength. Fracture strain of directionally solidified(DS) $Fe_3A1$ is about 1%at room temperature, but is about 60%at. $T_C$(550^{\circ}C)$. Tensile strength of DS alloy is lower than that of as-cast alloy at $530^{\circ}C$ and $430^{\circ}C$. Failure mode at room temperature varies from transgranular fracture to intergranular fracture with the addition of Al. the failure mode also varies from mixed(transgranular+ intergranular) mode between room temperature and $500^{\circ}C$ to intergranular mode above $550^{\circ}C$